SAE J 1536-2017 Two-Stroke-Cycle Engine Oil Fluidity Miscibility Classification.pdf
《SAE J 1536-2017 Two-Stroke-Cycle Engine Oil Fluidity Miscibility Classification.pdf》由会员分享,可在线阅读,更多相关《SAE J 1536-2017 Two-Stroke-Cycle Engine Oil Fluidity Miscibility Classification.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、 _ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising ther
2、efrom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2017 SAE International All rights reserved. No part of this
3、publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-49
4、70 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org/J1536_201706 SURFACE VEHICLE RECOMMENDED PRACTICE J1536 JUN2017 Issued 1988-10 Reaffirmed 2006
5、-12 Revised 2017-06 Superseding J1536 DEC2006 Two-Stroke-Cycle Engine Oil Fluidity/Miscibility Classification RATIONALE This document has been revised to include the removal of the reference to a 1987 version of ASTM D4682. 1. SCOPE This SAE Recommended Practice is intended for use by engine manufac
6、turers in determining the Fluidity/Miscibility Grades to be recommended for use in their engines, and by oil marketers in formulating and labeling their products. 2. REFERENCES 2.1 Applicable Documents The following publications form a part of this specification to the extent specified herein. Unles
7、s otherwise indicated, the latest issue of SAE publications shall apply. 2.1.1 ASTM Publications Available from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959, Tel: 610-832-9585, www.astm.org. ASTM D4682 Specification for Miscibility With Gasoline and Flui
8、dity of Two-Stroke-Cycle Gasoline Engine Lubricants ASTM D4857 Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards ASTM D4858 Test Method for Determination of the Tendency of Lubricants to
9、Promote Preignition in Two-Stroke-Cycle Gasoline Engines ASTM D4859 Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines - TC ASTM D4863 Test Method for Determination of the Lubricity of Two-Stroke Gasoline Engine Lubricants SAE INTERNATIONAL J1536 JUN2017 Page 2 of 3 3.
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SAEJ15362017TWOSTROKECYCLEENGINEOILFLUIDITYMISCIBILITYCLASSIFICATIONPDF
链接地址:http://www.mydoc123.com/p-1026381.html