SAE AS 9362A-2001 NUT PLAIN HEXAGON CHECK - UNS S66286 130 KSI MIN SILVER PLATED《(R)FSC 5310最小值为130 KSI的UNS S66286检验用镀银六角头平纹螺母》.pdf

《SAE AS 9362A-2001 NUT PLAIN HEXAGON CHECK - UNS S66286 130 KSI MIN SILVER PLATED《(R)FSC 5310最小值为130 KSI的UNS S66286检验用镀银六角头平纹螺母》.pdf》由会员分享，可在线阅读，更多相关《SAE AS 9362A-2001 NUT PLAIN HEXAGON CHECK - UNS S66286 130 KSI MIN SILVER PLATED《(R)FSC 5310最小值为130 KSI的UNS S66286检验用镀银六角头平纹螺母》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AEROSPACE STANDARD NUT, PLAIN, HEXAGON, CHECK - UNS S66286, 130 KSI MIN, SILVER PLATED AS9362Copyright 2012 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocop

2、ying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1999-12REVISED2001-08 REAFFIRM

3、ED 2012-11THIRD ANGLE PROJECTION CUSTODIAN: E-25 REV.AFEDERAL SUPPLY CLASS 5310 AS9362SHEET 1 OF 2REV. APROCUREMENT SPECIFICATION: NONESAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is enti

4、rely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised, reaffirmed, stabilized, orcancelled. SAE invite

5、s yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS9362ARATIONALE AS9362A HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. AEROSPACE STANDARD AS9362SHEET 2 OF 2REV.ANUT, PLAIN, HEXAGON, CHECK - UNS S66286, 130 KSI MIN, SILVER PLATED