SAE AS 85049 8C-2012 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 90 SHIELD TERMINATION CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERI.pdf

《SAE AS 85049 8C-2012 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 90 SHIELD TERMINATION CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERI.pdf》由会员分享，可在线阅读，更多相关《SAE AS 85049 8C-2012 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 90 SHIELD TERMINATION CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERI.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) AS85049/8Copyright 2017 SAE International All rights reserved. No

2、 part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel:

3、 +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2001-07REVISED2012-07REAFFIRMED 2017-08THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.CFEDERAL SUPPLY CLASS 5935 AS85049/8 SHEET 1 OF 9 REV. C PROCUREMENT SPECIFICATION: AS8504

4、9 SAETechnicalStandardsBoard Rulesprovidethat:“Thisreportispublished bySAEto advance the state oftechnicaland engineering sciences.The use ofthisreportisentirelyvoluntary,anditsapplicabilityandsuitabilityforanyparticularuse,includinganypatentinfringementarising therefrom,isthe sole responsibilityoft

5、heuser.”SAEreviewseachtechnicalreportatleasteveryfiveyearsatwhich time itmaybe revised,reaffirmed,stabilized,orcancelled.SAEinvitesyourwritten commentsandsuggestions.SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org/AS85049/8C RATIONALE AS85049

6、/8C HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. NOTICE THE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF: SAE AS85049. FIGURE 1 - CONFIGURATION AND DIMENSIONS AEROSPACE STANDARD AS85049/8 SHEET 2 OF 9

7、 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) REV. C FIGURE 1 - CONFIGURATION AND DIMENSIONS (CONTINUED) TABLE 1 - DIMENSIONS DASH

8、 NO. CONNECTOR SHELL SIZE CLAMP SIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 AS50151 CRIMP MIL-DTL-83723 SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 1 3 N/A N/A N/A 4 .125 ( 3.18) .250 ( 6.35) 1 1.800 (45.72) 1.544 (39.22) 2 6 .250 ( 6.35) .437 (11.10) 2 1.32

9、0 (33.53) 1.544 (39.22) 3 N/A 8 8S 8 4 .125 ( 3.18) .250 ( 6.35) 1 1.200 (30.48) 1.544 (39.22) 4 10 10S, 10SL 10 4 .125 ( 3.18) .312 ( 7.92) 1 1.920 (48.77) 1.544 (39.22) 5 6 .250 ( 6.35) .375 ( 9.53) 1 1.320 (33.53) 1.544 (39.22) 6 7 12 12, 12S 12 4 .125 ( 3.18) .312 ( 7.92) 1 1.940 (49.28) 1.544 (

10、39.22) 7 6 .250 ( 6.35) .437 (11.10) 1 1.940 (49.28) 1.544 (39.22) 8 10 .350 ( 8.89) .500 (12.70) 1 1.335 (33.91) 1.844 (46.84) 9 12 14 14,14S 14 6 .250 ( 6.35) .437 (11.10) 1 2.010 (51.05) 1.544 (39.22) 10 10 .350 ( 8.89) .575 (14.61) 1 1.655 (42.04) 1.844 (46.84) 11 19 16 16, 16S 16 6 .250 ( 6.35)

11、 .437 (11.10) 1 2.100 (53.34) 1.544 (39.22) 12 12 .500 (12.70) .700 (17.78) 1 1.745 (44.32) 1.916 (48.67) 13 27 18 18 18 10 .350 ( 8.89) .625 (15.88) 1 2.270 (57.66) 1.844 (46.84) 14 16 .625 (15.88) .779 (19.79) 1 1.920 (48.77) 2.000 (50.8) 15 37 20 20 20 10 .350 ( 8.89) .625 (15.88) 1 2.270 (57.66)

12、 1.844 (46.84) 16 16 .625 (15.88) .904 (22.96) 1 1.920 (48.77) 2.000 (50.8) AEROSPACE STANDARD AS85049/8 SHEET 3 OF 9 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-

13、DTL-83723 SERIES III CONNECTORS) REV. C TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 1 .669 (16.99) .636 (16.15) .625-24 UNEF 1.18 (29.97) 1.57 (39.88) 2 .669 (16.99) 1.386 (35.20) .750-20 UNEF 2.02 (51.31) .858 (21.79) 2.41 (61.21) 3 .617 (15.67

14、) .541 (13.74) .625-24 UNEF 1.09 (27.69) 1.48 (37.59) 4 .734 (18.64) .636 (16.15) .625-24 UNEF 1.18 (29.97) 1.57 (39.88) 5 .734 (18.64) .636 (16.15) .750-20 UNEF 1.27 (32.26) 1.66 (42.16) 6 .858 (21.79) .641 (16.28) .625-24 UNEF 1.18 (29.97) 1.57 (39.88) 7 .858 (21.79) .641 (16.28) .750-20 UNEF 1.28

15、 (32.51) 1.67 (42.42) 8 .858 (21.79) .641 (16.28) 1.000-20 UNEF 1.37 (34.80) 1.76 (44.70) 9 .984 (24.99) .741 (18.82) .750-20 UNEF 1.38 (35.05) 1.77 (44.96) 10 .984 (24.99) .741 (18.82) 1.000-20 UNEF 1.47 (37.34) 1.86 (47.24) 11 1.112 (28.24) .926 (23.52) .750-20 UNEF 1.59 (40.39) 1.98 (50.29) 12 1.

16、112 (28.24) .926 (23.52) 1.1875-18 UNEF 1.77 (44.96) 2.16 (54.86) 13 1.218 (30.94) 1.016 (25.81) 1.000-20 UNEF 1.80 (45.72) 2.19 (55.63) 14 1.218 (30.94) 1.016 (25.81) 1.4375-18 UNEF 1.97 (50.04) 2.36 (59.94) 15 1.345 (34.16) 1.016 (25.81) 1.000-20 UNEF 1.80 (45.72) 2.19 (55.63) 16 1.345 (34.16) 1.0

17、16 (25.81) 1.4375-18 UNEF 1.97 (50.04) 2.36 (59.94) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. CONNECTOR SHELL SIZE CLAMP SIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 AS50151 CRIMP MIL-DTL-83723 SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 17 N/A 22 22 22 12 .5

18、00 (12.70) .750 (19.05) 1 2.380 (60.45) 1.916 (48.72) 18 20 .875 (22.23) 1.029 (26.14) 1 2.025 (51.44) 2.230 (56.64) 19 24 24 24 12 .500 (12.70) .750 (19.05) 1 2.380 (60.45) 1.916 (48.67) 20 20 .875 (22.23) 1.144 (29.06) 1 2.025 (51.44) 2.230 (56.64) 21 N/A 28 N/A 16 .625 (15.88) .937 (23.80) 1 2.55

19、0 (64.77) 2.000 (50.8) 22 24 1.000 (25.40) 1.375 (34.93) 1 2.195 (55.75) 2.024 (51.41) 23 32 16 .625 (15.88) .937 (23.80) 1 2.800 (71.12) 2.000 (50.8) 24 20 .875 (22.23) 1.250 (31.75) 1 2.800 (71.12) 2.230 (56.64) 25 28 1.250 (31.75) 1.625 (41.28) 1 2.445 (62.10) 2.550 (64.77) 26 36 16 .625 (15.88)

20、.937 (23.80) 1 2.770 (70.36) 2.000 (50.8) 27 24 1.000 (25.40) 1.375 (34.93) 1 2.770 (70.36) 2.024 (51.41) 28 32 1.437 (36.50) 1.840 (46.74) 1 2.415 (61.34) 2.600 (66.04) 29 40 16 .625 (15.88) .937 (23.80) 1 2.770 (70.36) 2.000 (50.8) 30 24 1.000 (25.40) 1.375 (34.93) 1 2.770 (70.36) 2.024 (51.41) 31

21、 32 1.437 (36.50) 1.875 (47.63) 1 2.415 (61.34) 2.600 (66.04) AEROSPACE STANDARD AS85049/8 SHEET 4 OF 9 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERI

22、ES III CONNECTORS) REV. C TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 17 1.468 (37.29) 1.166 (29.62) 1.1875-18 UNEF 2.11 ( 53.59) 2.50 ( 63.50) 18 1.468 (37.29) 1.166 (29.62) 1.750-18 UNS 2.29 ( 58.17) 2.68 ( 68.07) 19 1.593 (40.46) 1.166 (29.62

23、) 1.1875-18 UNEF 2.11 ( 53.59) 2.50 ( 63.50) 20 1.593 (40.46) 1.166 (29.62) 1.750-18 UNS 2.29 ( 58.17) 2.68 ( 68.07) 21 1.969 (50.01) 1.266 (32.16) 1.4375-18 UNEF 2.33 ( 59.18) 2.88 ( 73.15) 22 1.969 (50.01) 1.266 (32.16) 2.000-18 UNS 2.51 ( 63.75) 3.06 ( 77.72) 23 2.219 (56.36) 1.616 (41.05) 1.4375

24、-18 UNEF 2.81 ( 71.37) 3.36 ( 85.34) 24 2.219 (56.36) 1.616 (41.05) 1.750-18 UNS 2.81 ( 71.37) 3.36 ( 85.34) 25 2.219 (56.36) 1.616 (41.05) 2.250-16 UN 3.07 ( 77.98) 3.62 ( 91.95) 26 2.469 (62.71) 1.816 (46.13) 1.4375-18 UNEF 3.13 ( 79.50) 3.68 ( 93.47) 27 2.469 (62.71) 1.816 (46.13) 2.000-18 UNS 3.

25、13 ( 79.50) 3.68 ( 93.47) 28 2.469 (62.71) 1.816 (46.13) 2.500-16 UN 3.39 ( 86.11) 3.94 (100.08) 29 2.719 (69.06) 2.566 (65.18) 1.4375-18 UNEF 3.88 ( 98.55) 4.43 (112.52) 30 2.719 (69.06) 2.566 (65.18) 2.000-18 UNS 3.88 ( 98.55) 4.43 (112.52) 31 2.719 (69.06) 2.566 (65.18) 2.500-16 UN 4.14 (105.16)

26、4.69 (119.13) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. CONNECTOR SHELL SIZE CLAMP SIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 AS50151 CRIMP MIL-DTL-83723 SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 32 N/A N/A 44 N/A 16 .625 (15.88) .937 (23.80) 1 2.770 (70.

27、36) 2.000 (50.8) 33 24 1.000 (25.40) 1.375 (34.93) 1 2.770 (70.36) 2.024 (51.41) 34 32 1.437 (36.50) 1.875 (47.63) 1 2.415 (61.34) 2.600 (66.04) 35 48 16 .625 (15.88) .937 (23.80) 1 2.770 (70.36) 2.000 (50.8) 36 24 1.000 (25.40) 1.375 (34.93) 1 2.770 (70.36) 2.024 (51.41) 37 32 1.437 (36.50) 1.875 (

28、47.63) 1 2.415 (61.34) 2.600 (66.04) 38 61 N/A 12 .500 (12.70) .750 (19.05) 1 2.380 (60.45) 1.916 (48.67) 39 20 .875 (22.23) 1.184 (30.07) 1 2.025 (51.44) 2.230 (56.64) 40 19 16 16, 16S 16 10 .350 ( 8.89) .625 (15.88) 1 2.100 (53.34) 1.844 (46.84) 41 27 18 18 18 4 .125 ( 3.18) .312 ( 7.92) 1 2.270 (

29、57.66) 1.544 (39.22) 42 6 .250 ( 6.35) .437 (11.10) 1 2.270 (57.66) 1.544 (39.22) 43 37 20 20 20 6 .250 ( 6.35) .437 (11.10) 1 2.270 (57.66) 1.544 (39.22) 44 N/A 22 22 22 4 .125 ( 3.18) .312 ( 7.92) 1 2.380 (60.45) 1.544 (39.22) 45 6 .250 ( 6.35) .437 (11.10) 1 2.380 (60.45) 1.544 (39.22) 46 24 24 2

30、4 10 .350 ( 8.89) .625 (15.88) 1 2.380 (60.45) 1.844 (46.84) AEROSPACE STANDARD AS85049/8 SHEET 5 OF 9 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIE

31、S III CONNECTORS) REV. C TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 32 2.969 (75.41) 2.566 (65.18) 1.4375-18 UNEF 3.88 ( 98.55) 4.43 (112.52) 33 2.969 (75.41) 2.566 (65.18) 2.000-18 UNS 3.88 ( 98.55) 4.43 (112.52) 34 2.969 (75.41) 2.566 (65.18)

32、 2.500-16 UN 4.14 (105.16) 4.69 (119.13) 35 3.219 (81.76) 2.566 (65.18) 1.4375-18 UNEF 3.88 ( 98.55) 4.43 (112.52) 36 3.219 (81.76) 2.566 (65.18) 2.000-18 UNS 3.88 ( 98.55) 4.43 (112.52) 37 3.219 (81.76) 2.566 (65.18) 2.500-16 UN 4.14 (105.16) 4.69 (119.13) 38 1.653 (41.99) 1.166 (29.62) 1.1875-18 U

33、NEF 2.11 ( 53.59) 2.50 ( 63.50) 39 1.653 (41.99) 1.166 (29.62) 1.750-18 UNS 2.29 ( 58.17) 2.68 ( 68.07) 40 1.112 (28.24) .926 (23.52) 1.000-20 UNEF 1.66 ( 42.16) 2.05 ( 52.07) 41 1.218 (30.94) 1.016 (25.81) .625-24 UNEF 1.80 ( 45.72) 2.19 ( 55.63) 42 1.218 (30.94) 1.016 (25.81) .750-20 UNEF 1.80 ( 4

34、5.72) 2.19 ( 55.63) 43 1.345 (34.16) 1.016 (25.81) .750-20 UNEF 1.80 ( 45.72) 2.19 ( 55.63) 44 1.468 (37.29) 1.166 (29.62) .625-24 UNEF 2.11 ( 53.59) 2.50 ( 63.50) 45 1.468 (37.29) 1.166 (29.62) .750-20 UNEF 2.11 ( 53.59) 2.50 ( 63.50) 46 1.593 (40.46) 1.166 (29.62) 1.000-20 UNEF 2.11 ( 53.59) 2.50

35、( 63.50) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. CONNECTOR SHELL SIZE CLAMP SIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 AS50151 CRIMP MIL-DTL-83723 SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 47 N/A N/A 36 N/A 12 .500 (12.70) .750 (19.05) 1 2.770 (70.36) 1

36、.916 (48.67) 48 40 12 .500 (12.70) .750 (19.05) 1 2.770 (70.36) 1.916 (48.67) 49 10 10S, 10SL 10 6 .250 (6.35) .437 (11.10) 2 1.940 (49.28) 1.544 (39.22) 50 12 14 14, 14S 14 12 .500 (12.70) .750 (19.05) 2 2.270 (57.66) 1.916 (48.67) 51 19 16 16, 16S 16 16 .625 (15.88) .937 (23.80) 2 2.380 (60.45) 2.

37、000 (50.8) 52 27 18 18 18 12 .500 (12.70) .750 (19.05) 1 2.270 (57.66) 1.916 (48.67) 53 61 N/A N/A N/A 16 .625 (15.88) .937 (23.80) 1 2.025 (51.44) 2.000 (50.8) 54 37 20 20 20 12 .500 (12.70) .750 (19.05) 1 2.270 (57.66) 1.916 (48.67) 55 20 .875 (22.23) 1.250 (31.75) 2 2.550 (64.77) 2.230 (56.64) 56

38、 N/A 22 22 22 10 .350 ( 8.89) .625 (15.88) 1 2.380 (60.45) 1.844 (46.84) 57 16 .625 (15.88) .937 (23.80) 1 2.380 (60.45) 2.000 (50.8) 58 20 .875 (22.23) 1.250 (31.75) 2 2.550 (64.77) 2.230 (56.64) 59 24 24 24 16 .625 (15.88) .937 (23.80) 1 2.380 (60.45) 2.000 (50.8) 60 N/A 28 N/A 12 .500 (12.70) .75

39、0 (19.05) 1 2.550 (64.77) 1.916 (48.67) AEROSPACE STANDARD AS85049/8 SHEET 6 OF 9 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) REV

40、. C TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 47 2.469 (62.71) 1.816 (46.13) 1.1875-18 UNEF 3.13 (79.50) 3.68 ( 93.47) 48 2.719 (69.06) 1.816 (46.13) 1.1875-18 UNEF 3.88 (98.55) 4.43 (112.52) 49 .734 (18.64) 1.391 (35.33) .750-20 UNEF 2.03 (51

41、.56) .858 (21.79) 2.42 ( 61.47) 50 .984 (24.99) 1.766 (44.86) 1.1875-18 UNEF 2.61 (66.29) 1.218 (30.94) 3.00 ( 76.20) 51 1.112 (28.24) 1.916 (48.67) 1.4375-18 UNEF 2.87 (72.90) 1.468 (37.29) 3.26 ( 82.80) 52 1.218 (30.94) 1.016 (25.81) 1.1875-18 UNEF 1.86 (47.24) 2.25 ( 57.15) 53 1.653 (41.99) 1.166

42、 (29.62) 1.4375-18 UNEF 2.14 (54.36) 2.53 ( 64.26) 54 1.345 (34.16) 1.016 (25.81) 1.1875-18 UNEF 1.86 (47.24) 2.25 ( 57.15) 55 1.345 (34.16) 2.016 (51.21) 1.750-18 UNS 3.14 (79.76) 1.969 (50.01) 3.53 ( 89.66) 56 1.468 (37.29) 1.166 (29.62) 1.000-20 UNEF 2.11 (53.59) 2.50 ( 63.50) 57 1.468 (37.29) 1.

43、166 (29.62) 1.4375-18 UNEF 2.12 (53.85) 2.51 ( 63.75) 58 1.468 (37.29) 2.016 (51.21) 1.750-18 UNS 3.14 (79.76) 1.969 (50.01) 3.53 ( 89.66) 59 1.593 (40.46) 1.166 (29.62) 1.4375-18 UNEF 2.14 (54.36) 2.53 ( 64.26) 60 1.969 (50.01) 1.266 (32.16) 1.1875-18 UNEF 2.33 (59.18) 2.88 ( 73.15) TABLE 1 - DIMEN

44、SIONS (CONTINUED) DASH NO. CONNECTOR SHELL SIZE CLAMP SIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 AS50151 CRIMP MIL-DTL-83723 SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 61 N/A N/A 28 N/A 20 .875 (22.23) 1.250 (31.75) 1 2.550 (64.77) 2.230 (56.64) 62 32 24 1

45、.000 (25.40) 1.375 (34.93) 1 2.800 (71.12) 2.024 (51.41) 63 36 20 .875 (22.23) 1.250 (31.75) 1 2.770 (70.36) 2.230 (56.64) 64 28 1.250 (31.75) 1.625 (41.28) 1 2.770 (70.36) 2.550 (64.77) 65 40 20 .875 (22.23) 1.250 (31.75) 1 2.770 (70.36) 2.230 (56.64) 66 28 1.250 (31.75) 1.625 (41.28) 1 2.770 (70.3

46、6) 2.550 (64.77) 67 44 20 .875 (22.23) 1.250 (31.75) 1 2.770 (70.36) 2.230 (56.64) 68 28 1.250 (31.75) 1.625 (41.28) 1 2.770 (70.36) 2.550 (64.77) 69 48 20 .875 (22.23) 1.250 (31.75) 1 2.770 (70.36) 2.230 (56.64) 70 28 1.250 (31.75) 1.625 (41.28) 1 2.770 (70.36) 2.550 (64.77) 71 7 12 12, 12S 12 10 .

47、350 ( 8.89) .625 (15.88) 2 2.100 (53.34) 1.844 (46.84) 72 27 18 18 18 16 .625 (15.88) .937 (23.80) 2 2.380 (60.45) 2.000 (50.8) 73 N/A 24 24 24 20 .875 (22.23) 1.250 (31.75) 2 2.550 (64.77) 2.230 (56.64) 74 12 14 14, 14S 14 4 .125 ( 3.18) .312 ( 7.92) 1 2.010 (51.05) 1.544 (39.22) 75 19 16 16, 16S 1

48、6 4 .125 ( 3.18) .312 ( 7.92) 1 2.100 (53.34) 1.544 (39.22) AEROSPACE STANDARD AS85049/8 SHEET 7 OF 9 CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) REV. C TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 61 1.969 (50.01) 1.266 (32.16) 1.750-18 UNS 2.39 ( 60.71) 2.94 ( 74.68) 62 2.219 (56.36) 1.616 (