SAE AS 85049 82C-2014 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL STRAIGHT SELF-LOCKING SHIELD BAND TERMINATION (RFI EMI) SHRINK SLEEVE ACCOMMODATION CATEGORY 3B (FOR AS50151 CRIMP .pdf

《SAE AS 85049 82C-2014 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL STRAIGHT SELF-LOCKING SHIELD BAND TERMINATION (RFI EMI) SHRINK SLEEVE ACCOMMODATION CATEGORY 3B (FOR AS50151 CRIMP .pdf》由会员分享，可在线阅读，更多相关《SAE AS 85049 82C-2014 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL STRAIGHT SELF-LOCKING SHIELD BAND TERMINATION (RFI EMI) SHRINK SLEEVE ACCOMMODATION CATEGORY 3B (FOR AS50151 CRIMP .pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)AS85049/82Copyright 2014 SAE Inter

2、national All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7

3、323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2000-06REVISED 2014-01THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.CFEDERAL SUPPLY CLASS 5935 AS85049/82SHEET 1 OF 4REV. CPROCUREMENT SPECIFIC

4、ATION: AS85049SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising ther

5、efrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised, reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit ht

6、tp:/www.sae.org/technical/standards/AS85049/82CRATIONALE REVISION IS REQUIRED TO ADD NEW PART NUMBER AND DIMENSIONS FOR AN ACCESSORY THAT WILL ACCOMMODATE SHELL SIZE 61, PER USER (NASA) URGENT REQUEST AND QPL SOURCE AGREEMENT TO QUALIFY. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DES

7、CRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS85049. FIGURE 1 - CONFIGURATION AND DIMENSIONS AEROSPACE STANDARD AS85049/82SHEET 2 OF 4REV. CCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, C

8、ATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)INCH MM INCH MM INCH MM INCH MM INCH MM .044.130.140.250.312.395.438.4571.12 3.30 3.56 6.35 7.92 10.03 11.13 11.61 .500 .562.583.625.660.684.707.73012.70 14.27 14.81 15.88 16.76 17.37 17.9

9、6 18.54 .750 .770.812.829.875.885.895.93819.05 19.56 20.62 21.06 22.22 22.48 22.73 23.83 .957 1.000 1.010 1.020 1.083 1.125 1.135 1.145 24.30 25.40 25.65 25.91 27.51 28.58 28.83 29.08 1.190 1.260 1.270 1.385 1.510 1.635 1.750 1.885 2.135 30.23 32.00 32.26 35.18 38.35 41.53 44.45 47.88 54.23 FIGURE 2

10、 - SELECTIVE PLATING NOTES: 1. DIMENSIONS ARE IN INCHES AND APPLY AFTER PLATING. 2. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED UPON 1.00 INCH = 25.4 MM. 3. CADMIUM, ZINC NICKEL OR PURE DENSE ELECTRODEPOSITED ALUMINUM/NICKEL INTERFACE SHALL BE COATED WITH POLYSULFIDE SEAL

11、ANT. 4. PART SUPPLIED WITH STANDARD DETENTED SELF-LOCKING WHICH PROVIDES A POSITIVE AUDIBLE DETENTED COUPLING. OPTION N IS A FREE SPINNING SELF-LOCKING COUPLING. 5. RIBBED, INTERNAL KNURL OR SURFACE ROUGHNESS Ra 125-250 IN ACCORDANCE WITH ANSI 846.1. SEE FIGURE 2 FOR SELECTIVE PLATING DETAIL. 6. ARE

12、A FREE OF CADMIUM, ZINC NICKEL OR PURE DENSE ELECTRODEPOSITED ALUMINUM, AS APPLICABLE. AEROSPACE STANDARD AS85049/82SHEET 3 OF 4REV. CCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP,

13、MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE 1 - SHELL SIZE AND DIMENSIONS REQUIREMENTS: DESIGN AND CONSTRUCTION: DIMENSIONS AND CONFIGURATION: SEE FIGURES 1 AND 2, AND TABLE 1. INTERFACE DIMENSIONS: SHALL CONFORM TO SAE AS85049. COUPLING NUT: SHALL BE CAPTI

14、VATED TO THE ADAPTER BODY AND ROTATEABLE. MATERIAL AND FINISH: IN ACCORDANCE WITH SAE AS85049 AND TABLE 2 HEREIN. TABLE 2 - MATERIAL AND FINISH FINISH MATERIAL 1/ N-ELECTROLESS NICKEL ALUMINUM ALLOY IN ACCORDANCE WITH AS85049 2/ P-CADMIUM OLIVE DRAB OVER ELECTROLESS NICKEL (SELECTIVE PLATING, SEE FI

15、GURE 2) YP-PURE DENSE ELECTRODEPOSITED ALUMINUM OVER ELECTROLESS NICKEL (SELECTIVE PLATING, SEE FIGURE 2) 2/ W-CADMIUM OLIVE DRAB X-NICKEL FLUOROCARBON POLYMER 2/ Z-ZINC NICKEL 2/ ZP- ZINC NICKEL OVER ELECTROLESS NICKEL (SELECTIVE PLATING, SEE FIGURE 2) 1/ NOT FOR NAVY USE, RESTRICTED TO AIR FORCE S

16、PACE APPLICATIONS ONLY. 2/ P, W, Z AND ZP FINISH NOT FOR USE IN SPACE APPLICATIONS. ALSO SEE SPECIFICATION NOTES. ACCESSORY SHELLSIZEFOR CONNECTOR SHELL SIZE (REF) AMAXDIAB DIA .010 ENTRY SIZE C DIA REF AS81703 SERIES 3 MIL-DTL- 26482 SERIES 2 AS50151 CRIMP MIL-DTL- 83723 SERIES III02 03 02 03 08 -

17、8 8S 8 .885 (22.48) N/A .250 (6.35) N/A .395 (10.03)10 - 10 10S,10SL 10 1.010 (25.65) N/A .312 (7.92) N/A .457 (11.61)12 7 12 12S AND 12 12 1.135 (28.83) .312 (7.92) .438 (11.13) .457 (11.61) .583 (14.81)14 12 14 14S AND 14 14 1.260 (32.00) .438 (11.13) .562 (14.27) .583 (14.81) .707 (17.96)16 19 16

18、 16S AND 16 16 1.385 (35.18) .500 (12.70) .625 (15.88) .645 (16.38) .770 (19.56)18 27 18 18 18 1.510 (38.35) .625 (15.88) .750 (19.05) .770 (19.56) .895 (22.73)20 37 20 20 20 1.635 (41.53) .625 (15.88) .812 (20.62) .770 (19.56) .957 (24.31)22 - 22 22 22 1.760 (44.70) .688 (17.48) .938 (23.83) .829 (

19、21.06) 1.083 (27.51)24 - 24 24 24 1.885 (47.88) .750 (19.05) 1.000 (25.40) .895 (22.73) 1.145 (29.08)28 - - 28 - 2.135 (54.23) .875 (22.23) 1.125 (28.58) 1.020 (25.91) 1.270 (32.26)61 61 - - - 1.95 (49.53) .750 (19.05) 1.000 (25.40) .895 (26.30) 1.145 (30.35)AEROSPACE STANDARD AS85049/82SHEET 4 OF 4

20、REV. CCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)PART NUMBER: SEE EXAMPLE BELOW: QUALIFICATION:

21、SEE AS85049, CATEGORY 3B. SPECIFICATION NOTES: NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING ARE

22、AS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.