SAE AS 614 SUP 1-1998 Hose Assembly Polytetrafluoroethylene Metallic Reinforced 4000 psi 400 F Heavy Duty Hydraulic and Pneumatic (Supplement 1)《4000psi、400F重型液压和气动金属增强聚四氟乙烯软管组件(补充.pdf

《SAE AS 614 SUP 1-1998 Hose Assembly Polytetrafluoroethylene Metallic Reinforced 4000 psi 400 F Heavy Duty Hydraulic and Pneumatic (Supplement 1)《4000psi、400F重型液压和气动金属增强聚四氟乙烯软管组件(补充.pdf》由会员分享，可在线阅读，更多相关《SAE AS 614 SUP 1-1998 Hose Assembly Polytetrafluoroethylene Metallic Reinforced 4000 psi 400 F Heavy Duty Hydraulic and Pneumatic (Supplement 1)《4000psi、400F重型液压和气动金属增强聚四氟乙烯软管组件(补充.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、AEROSPACESTANDARDIssued 1998-06AS614SUP1HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED,4000 psi, 400 F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC(SUPPLEMENT 1)1. SCOPE:This supplement forms a part of the Aerospace Standard AS614, Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 40

2、00 psi, 400 F, Heavy Duty, Hydraulic and Pneumatic, and shall be used to identify hose assembly standards citing this procurement specification.2. REFERENCES:The following publications form a part of this document to the extent specified herein. The latest issue of SAE publications shall apply. The

3、applicable issue of other publications shall be the issue in effect on the date of the purchase order. In the event of conflict between the text of this document and references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and

4、 regulations unless a specific exemption has been obtained.2.1 SAE Publications:Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.AS4642 Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 F, 4000 psi, Flared, Straight to Straight, Cres FittingsAS4643 Hose Assembly, Poly

5、tetrafluoroethylene, Cres Reinforced, 400 F, 4000 psi, Flared, Straight to 45, Cres FittingsAS4644 Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 F, 4000 psi, Flared, Straight to 90, Cres FittingsAS4645 Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 F, 4000 psi, Flared, 4

6、5 to 45, Cres FittingsAS4646 Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 F, 4000 psi, Flared, 45 to 90, Cres FittingsAS4647 Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 F, 4000 psi, Flared, 90 to 90, Cres FittingsSAE Technical Standards Board Rules provide that: “Thi

7、s report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.”SAE reviews

8、 each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2004 SAE InternationalAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitte

9、d, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: 724-776-4970 (outside USA)Fax: 724-776-0790Email: custsvcsae.orgSAE WEB ADDRESS: http:/www.sae.orgReaffirmed 2004-06Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-