书签分享收藏举报版权申诉 / 10

立即下载加入VIP,交流精品资源

当前位置：首页 > 标准规范 > 国际标准 > 其他 > SAE AS 5729-2011 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL《AMS7379(碳氟化物)材料模塑O型环》.pdf

SAE AS 5729-2011 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL《AMS7379(碳氟化物)材料模塑O型环》.pdf

上传人：rimleave225

文档编号：1024936

上传时间：2019-03-21

格式：PDF

页数：10

大小：167.65KB

《SAE AS 5729-2011 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL《AMS7379(碳氟化物)材料模塑O型环》.pdf》由会员分享，可在线阅读，更多相关《SAE AS 5729-2011 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL《AMS7379(碳氟化物)材料模塑O型环》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、AEROSPACE STANDARD O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL AS5729Copyright 2011 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording,

2、or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2011-03THIRD ANGLE PROJECTION CUSTODIAN: A-6C F

3、EDERAL SUPPLY CLASS 5331 AS5729SHEET 1 OF 10PROCUREMENT SPECIFICATION: SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany part

4、icular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feed

5、backon this Technical Report, please visit http:/www.sae.org/technical/standards/AS5729RATIONALETHIS STANDARD ESTABLISHES THE DIMENSIONAL AND VISUAL QUALITY REQUIREMENTS, LOT REQUIREMENTS AND PACKAGING AND LABELING REQUIREMENTS FOR O-RINGS MOLDED FROM AMS 7379 RUBBER. IT SHALL BE USED FOR PROCUREMEN

6、T PURPOSES. FIGURE 1 O-RING DIMENSIONS REFERENCE FOR TABLE 1. WIDTH (W) AND INSIDE DIAMETER (ID) TABLE 1 O-RING DIMENSIONS, TOLERANCES, AND APPROXIMATE MASS PER 100 PIECES BY PART NUMBER PARTNUMBER IDINID(MM)W DIA INW DIA (MM) APPROX MASS MIN MAX MIN MAX MIN MAX MIN MAX LB/100 KG/100 AS5729-001 .025

7、 .033 0.64 0.84 .037 .043 0.94 1.09 0.002 0.001 AS5729-002 .038 .046 0.97 1.17 .047 .053 1.19 1.35 0.003 0.001 AS5729-003 .052 .060 1.32 1.52 .057 .063 1.45 1.60 0.005 0.002 AS5729-004 .065 .075 1.65 1.90 .067 .073 1.70 1.85 0.007 0.003 AS5729-005 .096 .106 2.44 2.69 .067 .073 1.70 1.85 0.008 0.004

8、AS5729-006 .109 .119 2.77 3.02 .067 .073 1.70 1.85 0.009 0.004 AS5729-007 .140 .150 3.56 3.81 .067 .073 1.70 1.85 0.009 0.004 AS5729-008 .171 .181 4.34 4.60 .067 .073 1.70 1.85 0.010 0.005 AS5729-009 .203 .213 5.16 5.41 .067 .073 1.70 1.85 0.011 0.005 AS5729-010 .234 .244 5.94 6.20 .067 .073 1.70 1.

9、85 0.012 0.005 AS5729-011 .296 .306 7.52 7.77 .067 .073 1.70 1.85 0.013 0.006 AS5729-012 .359 .369 9.12 9.37 .067 .073 1.70 1.85 0.015 0.007 AS5729-013 .421 .431 10.69 10.95 .067 .073 1.70 1.85 0.017 0.008 AS5729-014 .484 .494 12.29 12.55 .067 .073 1.70 1.85 0.018 0.008 AS5729-015 .544 .558 13.82 14

10、.17 .067 .073 1.70 1.85 0.020 0.009 AS5729-016 .605 .623 15.37 15.82 .067 .073 1.70 1.85 0.021 0.010 AS5729-017 .667 .685 16.94 17.40 .067 .073 1.70 1.85 0.023 0.010 AS5729-018 .730 .748 18.54 19.00 .067 .073 1.70 1.85 0.025 0.011 (a) AS5729-019 .792 .810 20.12 20.57 .067 .073 1.70 1.85 0.026 0.012

11、AS5729-020 .855 .873 21.72 22.17 .067 .073 1.70 1.85 0.028 0.013 AS5729-021 .917 .935 23.29 23.75 .067 .073 1.70 1.85 0.029 0.013 AS5729-022 .979 .999 24.87 25.37 .067 .073 1.70 1.85 0.031 0.014 AS5729-023 1.041 1.061 26.44 26.95 .067 .073 1.70 1.85 0.033 0.015 AS5729-024 1.104 1.124 28.04 28.55 .06

12、7 .073 1.70 1.85 0.034 0.016 AS5729-025 1.165 1.187 29.59 30.15 .067 .073 1.70 1.85 0.036 0.016 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS5729SHEET 2 OF 10O-RING MOLDED FRO

13、M AMS7379 (FLUOROCARBON) MATERIAL TABLE 1 O-RING DIMENSIONS, TOLERANCES, AND APPROXIMATE MASS PER 100 PIECES BY PART NUMBER (CONTD) PARTNUMBER IDINID(MM)W DIA INW DIA (MM) APPROX MASS MIN MAX MIN MAX MIN MAX MIN MAX LB/100 KG/100 AS5729-026 1.228 1.250 31.19 31.75 .067 .073 1.70 1.85 0.037 0.017 AS5

14、729-027 1.290 1.312 32.77 33.32 .067 .073 1.70 1.85 0.039 0.018 AS5729-028 1.351 1.377 34.32 34.98 .067 .073 1.70 1.85 0.041 0.018 AS5729-029 1.476 1.502 37.49 38.15 .067 .073 1.70 1.85 0.044 0.020 AS5729-030 1.601 1.627 40.67 41.33 .067 .073 1.70 1.85 0.047 0.021 AS5729-031 1.724 1.754 43.79 44.55

15、.067 .073 1.70 1.85 0.050 0.023 AS5729-032 1.849 1.879 46.96 47.73 .067 .073 1.70 1.85 0.053 0.024 AS5729-033 1.971 2.007 50.06 50.98 .067 .073 1.70 1.85 0.057 0.026 AS5729-034 2.096 2.132 53.24 54.15 .067 .073 1.70 1.85 0.060 0.027 AS5729-035 2.221 2.257 56.41 57.33 .067 .073 1.70 1.85 0.063 0.029

16、(b) AS5729-036 2.346 2.382 59.59 60.50 .067 .073 1.70 1.85 0.066 0.030 AS5729-037 2.471 2.507 62.76 63.68 .067 .073 1.70 1.85 0.069 0.032 AS5729-038 2.594 2.634 65.9 66.9 .067 .073 1.70 1.85 0.073 0.033 AS5729-039 2.719 2.759 69.1 70.1 .067 .073 1.70 1.85 0.076 0.035 AS5729-040 2.844 2.884 72.2 73.3

17、 .067 .073 1.70 1.85 0.079 0.036 AS5729-041 2.965 3.013 75.3 76.5 .067 .073 1.70 1.85 0.082 0.037 AS5729-042 3.215 3.263 81.7 82.9 .067 .073 1.70 1.85 0.089 0.040 AS5729-043 3.465 3.513 88.0 89.2 .067 .073 1.70 1.85 0.095 0.043 AS5729-044 3.712 3.766 94.3 95.7 .067 .073 1.70 1.85 0.102 0.046 AS5729-

18、045 3.962 4.016 100.6 102.0 .067 .073 1.70 1.85 0.108 0.049 AS5729-046 4.209 4.269 106.9 108.4 .067 .073 1.70 1.85 0.114 0.052 AS5729-047 4.459 4.519 113.3 114.8 .067 .073 1.70 1.85 0.121 0.055 AS5729-048 4.709 4.769 119.6 121.1 .067 .073 1.70 1.85 0.127 0.058 AS5729-049 4.952 5.026 125.8 127.7 .067

19、 .073 1.70 1.85 0.134 0.061 AS5729-050 5.202 5.276 132.1 134.0 .067 .073 1.70 1.85 0.140 0.064 AS5729-102 .044 .054 1.12 1.37 .100 .106 2.54 2.69 0.019 0.009 AS5729-103 .076 .086 1.93 2.18 .100 .106 2.54 2.69 0.020 0.009 AS5729-104 .107 .117 2.72 2.97 .100 .106 2.54 2.69 0.021 0.010 AS5729-105 .138

20、.148 3.51 3.76 .100 .106 2.54 2.69 0.022 0.010 AS5729-106 .169 .179 4.29 4.55 .100 .106 2.54 2.69 0.023 0.010 AS5729-107 .201 .211 5.11 5.36 .100 .106 2.54 2.69 0.023 0.011 AS5729-108 .232 .242 5.89 6.15 .100 .106 2.54 2.69 0.024 0.011 AS5729-109 .294 .304 7.47 7.72 .100 .106 2.54 2.69 0.026 0.012 A

21、S5729-110 .357 .367 9.07 9.32 .100 .106 2.54 2.69 0.027 0.012 AS5729-111 .419 .429 10.64 10.90 .100 .106 2.54 2.69 0.029 0.013 AS5729-112 .482 .492 12.24 12.50 .100 .106 2.54 2.69 0.031 0.014 AS5729-113 .542 .556 13.77 14.12 .100 .106 2.54 2.69 0.032 0.015 AS5729-114 .603 .621 15.32 15.77 .100 .106

22、2.54 2.69 0.034 0.015 AS5729-115 .665 .683 16.89 17.35 .100 .106 2.54 2.69 0.035 0.016 AS5729-116 .728 .746 18.49 18.95 .100 .106 2.54 2.69 0.037 0.017 AS5729-117 .789 .809 20.04 20.55 .100 .106 2.54 2.69 0.039 0.018 AS5729-118 .852 .872 21.64 22.15 .100 .106 2.54 2.69 0.040 0.018 AS5729-119 .914 .9

23、34 23.22 23.72 .100 .106 2.54 2.69 0.042 0.019 AS5729-120 .977 .997 24.82 25.32 .100 .106 2.54 2.69 0.043 0.020 (a) AS5729-121 1.039 1.059 26.39 26.90 .100 .106 2.54 2.69 0.045 0.020 AS5729-122 1.102 1.122 27.99 28.50 .100 .106 2.54 2.69 0.047 0.021 AS5729-123 1.162 1.186 29.51 30.12 .100 .106 2.54

24、2.69 0.048 0.022 AS5729-124 1.225 1.249 31.12 31.72 .100 .106 2.54 2.69 0.050 0.023 AS5729-125 1.287 1.311 32.69 33.30 .100 .106 2.54 2.69 0.051 0.023 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

25、AEROSPACE STANDARD AS5729SHEET 3 OF 10O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL TABLE 1 O-RING DIMENSIONS, TOLERANCES, AND APPROXIMATE MASS PER 100 PIECES BY PART NUMBER (CONTD) PARTNUMBER IDINID(MM)W DIA INW DIA (MM) APPROX MASS MIN MAX MIN MAX MIN MAX MIN MAX LB/100 KG/100 AS5729-126 1.35

26、0 1.374 34.29 34.90 .100 .106 2.54 2.69 0.053 0.024 AS5729-127 1.412 1.436 35.86 36.47 .100 .106 2.54 2.69 0.055 0.025 AS5729-128 1.475 1.499 37.46 38.07 .100 .106 2.54 2.69 0.056 0.026 AS5729-129 1.534 1.564 38.96 39.73 .100 .106 2.54 2.69 0.058 0.026 AS5729-130 1.597 1.627 40.56 41.33 .100 .106 2.

27、54 2.69 0.059 0.027 AS5729-131 1.659 1.689 42.14 42.90 .100 .106 2.54 2.69 0.061 0.028 AS5729-132 1.722 1.752 43.74 44.50 .100 .106 2.54 2.69 0.063 0.028 AS5729-133 1.784 1.814 45.31 46.08 .100 .106 2.54 2.69 0.064 0.029 AS5729-134 1.847 1.877 46.91 47.68 .100 .106 2.54 2.69 0.066 0.030 AS5729-135 1

28、.908 1.942 48.46 49.33 .100 .106 2.54 2.69 0.067 0.031 AS5729-136 1.970 2.004 50.04 50.90 .100 .106 2.54 2.69 0.069 0.031 (a) AS5729-137 2.033 2.067 51.64 52.50 .100 .106 2.54 2.69 0.071 0.032 AS5729-138 2.095 2.129 53.21 54.08 .100 .106 2.54 2.69 0.072 0.033 AS5729-139 2.158 2.192 54.81 55.68 .100

29、.106 2.54 2.69 0.074 0.034 AS5729-140 2.220 2.254 56.39 57.25 .100 .106 2.54 2.69 0.075 0.034 AS5729-141 2.280 2.320 57.9 58.9 .100 .106 2.54 2.69 0.077 0.035 AS5729-142 2.342 2.382 59.5 60.5 .100 .106 2.54 2.69 0.079 0.036 AS5729-143 2.405 2.445 61.1 62.1 .100 .106 2.54 2.69 0.080 0.036 AS5729-144

30、2.467 2.507 62.7 63.7 .100 .106 2.54 2.69 0.082 0.037 AS5729-145 2.530 2.570 64.3 65.3 .100 .106 2.54 2.69 0.083 0.038 AS5729-146 2.592 2.632 65.8 66.9 .100 .106 2.54 2.69 0.085 0.039 AS5729-147 2.653 2.697 67.4 68.5 .100 .106 2.54 2.69 0.087 0.039 AS5729-148 2.715 2.759 69.0 70.1 .100 .106 2.54 2.6

31、9 0.088 0.040 AS5729-149 2.778 2.822 70.6 71.7 .100 .106 2.54 2.69 0.090 0.041 AS5729-150 2.840 2.884 72.1 73.3 .100 .106 2.54 2.69 0.091 0.042 AS5729-151 2.963 3.011 75.3 76.5 .100 .106 2.54 2.69 0.095 0.043 AS5729-152 3.213 3.261 81.6 82.8 .100 .106 2.54 2.69 0.101 0.046 AS5729-153 3.463 3.511 88.

32、0 89.2 .100 .106 2.54 2.69 0.108 0.049 AS5729-154 3.709 3.765 94.2 95.6 .100 .106 2.54 2.69 0.114 0.052 AS5729-155 3.959 4.015 100.6 102.0 .100 .106 2.54 2.69 0.120 0.055 AS5729-156 4.207 4.267 106.9 108.4 .100 .106 2.54 2.69 0.127 0.058 AS5729-157 4.457 4.517 113.2 114.7 .100 .106 2.54 2.69 0.133 0

33、.061 AS5729-158 4.707 4.767 119.6 121.1 .100 .106 2.54 2.69 0.140 0.063 AS5729-159 4.952 5.022 125.8 127.6 .100 .106 2.54 2.69 0.146 0.066 (b) AS5729-160 5.202 5.272 132.1 133.9 .100 .106 2.54 2.69 0.152 0.069 AS5729-161 5.452 5.522 138.5 140.3 .100 .106 2.54 2.69 0.159 0.072 AS5729-162 5.702 5.772

34、144.8 146.6 .100 .106 2.54 2.69 0.165 0.075 AS5729-163 5.952 6.022 151.2 153.0 .100 .106 2.54 2.69 0.172 0.078 AS5729-164 6.197 6.277 157.4 159.4 .100 .106 2.54 2.69 0.178 0.081 AS5729-165 6.447 6.527 163.8 165.8 .100 .106 2.54 2.69 0.184 0.084 AS5729-166 6.697 6.777 170.1 172.1 .100 .106 2.54 2.69

35、0.191 0.087 AS5729-167 6.947 7.027 176.5 178.5 .100 .106 2.54 2.69 0.197 0.090 AS5729-168 7.192 7.282 182.7 185.0 .100 .106 2.54 2.69 0.204 0.093 AS5729-169 7.442 7.532 189.0 191.3 .100 .106 2.54 2.69 0.210 0.095 AS5729-170 7.692 7.782 195.4 197.7 .100 .106 2.54 2.69 0.217 0.098 AS5729-171 7.942 8.0

36、32 201.7 204.0 .100 .106 2.54 2.69 0.223 0.101 AS5729-172 8.187 8.287 207.9 210.5 .100 .106 2.54 2.69 0.229 0.104 AS5729-173 8.437 8.537 214.3 216.8 .100 .106 2.54 2.69 0.236 0.107 AS5729-174 8.687 8.787 220.6 223.2 .100 .106 2.54 2.69 0.242 0.110 AS5729-175 8.937 9.037 227.0 229.5 .100 .106 2.54 2.

37、69 0.249 0.113 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS5729SHEET 4 OF 10O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL TABLE 1 O-RING DIMENSIONS, TOLERANCES, AND APPR

38、OXIMATE MASS PER 100 PIECES BY PART NUMBER (CONTD) PARTNUMBER IDINID(MM)W DIA INW DIA (MM) APPROX MASS MIN MAX MIN MAX MIN MAX MIN MAX LB/100 KG/100 AS5729-176 9.182 9.292 233.2 236.0 .100 .106 2.54 2.69 0.255 0.116 (b) AS5729-177 9.432 9.542 239.6 242.4 .100 .106 2.54 2.69 0.261 0.119 AS5729-178 9.

39、682 9.792 245.9 248.7 .100 .106 2.54 2.69 0.268 0.122 AS5729-201 .166 .176 4.22 4.47 .135 .143 3.43 3.63 0.049 0.022 AS5729-202 .229 .239 5.82 6.07 .135 .143 3.43 3.63 0.050 0.023 AS5729-203 .291 .301 7.39 7.65 .135 .143 3.43 3.63 0.052 0.024 AS5729-204 .354 .364 8.99 9.25 .135 .143 3.43 3.63 0.054

40、0.024 AS5729-205 .416 .426 10.57 10.82 .135 .143 3.43 3.63 0.055 0.025 AS5729-206 .479 .489 12.17 12.42 .135 .143 3.43 3.63 0.057 0.026 AS5729-207 .539 .553 13.69 14.05 .135 .143 3.43 3.63 0.058 0.027 AS5729-208 .600 .618 15.24 15.70 .135 .143 3.43 3.63 0.060 0.027 AS5729-209 .662 .680 16.81 17.27 .

41、135 .143 3.43 3.63 0.062 0.028 AS5729-210 .724 .744 18.39 18.90 .135 .143 3.43 3.63 0.063 0.029 AS5729-211 .786 .806 19.96 20.47 .135 .143 3.43 3.63 0.065 0.029 AS5729-212 .849 .869 21.56 22.07 .135 .143 3.43 3.63 0.066 0.030 AS5729-213 .911 .931 23.14 23.65 .135 .143 3.43 3.63 0.068 0.031 AS5729-21

42、4 .974 .994 24.74 25.25 .135 .143 3.43 3.63 0.070 0.032 AS5729-215 1.036 1.056 26.31 26.82 .135 .143 3.43 3.63 0.071 0.032 AS5729-216 1.097 1.121 27.86 28.47 .135 .143 3.43 3.63 0.073 0.033 AS5729-217 1.159 1.183 29.44 30.05 .135 .143 3.43 3.63 0.074 0.034 AS5729-218 1.222 1.246 31.04 31.65 .135 .14

43、3 3.43 3.63 0.076 0.035 AS5729-219 1.284 1.308 32.61 33.22 .135 .143 3.43 3.63 0.078 0.035 AS5729-220 1.347 1.371 34.21 34.82 .135 .143 3.43 3.63 0.079 0.036 AS5729-221 1.409 1.433 35.79 36.40 .135 .143 3.43 3.63 0.081 0.037 AS5729-222 1.469 1.499 37.31 38.07 .135 .143 3.43 3.63 0.082 0.037 AS5729-2

44、23 1.594 1.624 40.49 41.25 .135 .143 3.43 3.63 0.086 0.039 AS5729-224 1.719 1.749 43.66 44.42 .135 .143 3.43 3.63 0.089 0.040 AS5729-225 1.841 1.877 46.76 47.68 .135 .143 3.43 3.63 0.092 0.042 AS5729-226 1.966 2.002 49.94 50.85 .135 .143 3.43 3.63 0.095 0.043 AS5729-227 2.091 2.127 53.11 54.03 .135

45、.143 3.43 3.63 0.098 0.045 AS5729-228 2.214 2.254 56.2 57.3 .135 .143 3.43 3.63 0.102 0.046 AS5729-229 2.339 2.379 59.4 60.4 .135 .143 3.43 3.63 0.105 0.048 AS5729-230 2.464 2.504 62.6 63.6 .135 .143 3.43 3.63 0.108 0.049 AS5729-231 2.589 2.629 65.8 66.8 .135 .143 3.43 3.63 0.111 0.051 AS5729-232 2.

46、710 2.758 68.8 70.1 .135 .143 3.43 3.63 0.115 0.052 AS5729-233 2.835 2.883 72.0 73.2 .135 .143 3.43 3.63 0.118 0.054 (a) AS5729-234 2.960 3.008 75.2 76.4 .135 .143 3.43 3.63 0.121 0.055 AS5729-235 3.085 3.133 78.4 79.6 .135 .143 3.43 3.63 0.124 0.056 AS5729-236 3.210 3.258 81.5 82.8 .135 .143 3.43 3

47、.63 0.127 0.058 AS5729-237 3.335 3.383 84.7 85.9 .135 .143 3.43 3.63 0.131 0.059 AS5729-238 3.460 3.508 87.9 89.1 .135 .143 3.43 3.63 0.134 0.061 AS5729-239 3.581 3.637 91.0 92.4 .135 .143 3.43 3.63 0.137 0.062 AS5729-240 3.706 3.762 94.1 95.6 .135 .143 3.43 3.63 0.140 0.064 AS5729-241 3.831 3.887 9

48、7.3 98.7 .135 .143 3.43 3.63 0.143 0.065 AS5729-242 3.956 4.012 100.5 101.9 .135 .143 3.43 3.63 0.147 0.067 AS5729-243 4.081 4.137 103.7 105.1 .135 .143 3.43 3.63 0.150 0.068 AS5729-244 4.204 4.264 106.8 108.3 .135 .143 3.43 3.63 0.153 0.070 AS5729-245 4.329 4.389 110.0 111.5 .135 .143 3.43 3.63 0.1

49、56 0.071 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS5729SHEET 5 OF 10O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL TABLE 1 O-RING DIMENSIONS, TOLERANCES, AND APPROXIMATE MASS PER 100 PIECES BY PART NUMBER (CONTD) PARTNUMBER IDINID(MM)W DIA INW DIA (MM) APPROX MASS MIN MAX MIN MAX MIN MAX MIN MAX LB/100 KG/100 (a) AS5729-246 4.454 4

下载提示：本站仅提供存储空间/不修改/不编辑

1.请仔细阅读文档，确保文档完整性，对于不预览、不比对内容而直接下载带来的问题本站不予受理。
2.下载的文档，不会出现我们的网址水印。
3、该文档所得收入（下载+内容+预览）归上传者、原创作者；如果您是本文档原作者，请点此认领！既往收益都归您。

同意并开始全文预览

文档包含非法信息？点此举报后获取现金奖励！

文档加载中……请稍候！
如果长时间未打开，您也可以点击刷新试试。

下载文档到电脑，查找使用更方便

10000 积分 0人已下载

下载	加入VIP,交流精品资源

版权申诉 word格式文档无特别注明外均可编辑修改；预览文档经过压缩，下载后原文更清晰！ 立即下载

配套讲稿：: 如PPT文件的首页显示word图标，表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
特殊限制：: 部分文档作品中含有的国旗、国徽等图片，仅作为作品整体效果示例展示，禁止商用。设计者仅对作品中独创性部分享有著作权。
关键词：: SAEAS57292011ORINGMOLDEDFROMAMS7379FLUOROCARBONMATERIALAMS7379 氟化物材料型环 PDF

麦多课文档分享所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。

关于本文

本文标题：SAE AS 5729-2011 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL《AMS7379(碳氟化物)材料模塑O型环》.pdf
链接地址：http://www.mydoc123.com/p-1024936.html