SAE AS 3658A-2009 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK COBALT-NICKEL ALLOY UNS R30159 260 KSI MIN《机械螺栓 UNS R30159 260 KSI MIN镍钴合金精密公差柄具双六角扩展垫圈头》.pdf

《SAE AS 3658A-2009 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK COBALT-NICKEL ALLOY UNS R30159 260 KSI MIN《机械螺栓 UNS R30159 260 KSI MIN镍钴合金精密公差柄具双六角扩展垫圈头》.pdf》由会员分享，可在线阅读，更多相关《SAE AS 3658A-2009 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD CLOSE TOLERANCE SHANK COBALT-NICKEL ALLOY UNS R30159 260 KSI MIN《机械螺栓 UNS R30159 260 KSI MIN镍钴合金精密公差柄具双六角扩展垫圈头》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 AEROSPACE STANDARD BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN AS3658Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any

2、form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: h

3、ttp:/www.sae.org ISSUED 2007-10REVISED 2009-06 REAFFIRMED 2014-04THIRD ANGLE PROJECTION CUSTODIAN: E-25 REV.A FEDERAL SUPPLY CLASS 5306 AS3658 SHEET 1 OF 12 REV. A PROCUREMENT SPECIFICATION: AS7475SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of

4、technicalandengineeringsciences.The useofthis reportisentirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay b

5、erevised,reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS3658A RATIONALE AS3658A HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW P

6、OLICY. VIEW ASECTION THRUTHREAD PROFILE32250U0 - 5OO VSHAPE OPTIONAL IN THIS AREATHREAD RUNOUTPER A 3062S25032NMCHAMFER 28 - 32TO GOOTHREAD DPER AS8879- Z -TOL AD/1.002 Z- Y -CSEE NOTE 1TOL AC YTOL AC YBWRENCHING CONFIGURATIONPER AS870-XX (SEE TABLE 1A)FOR THIS DISTANCEEMARK PART NUMBER ANDMANUFACTU

7、RERS IDENTIFICATION PER AS 478 CLASS A EXCEPTEDGE DISTANCE REQUIREMENTS WAIVED250R .015MINF MINBEARING SURFACEHKTRAD R3245APPROXOG.001 M U Y MTHD MAJOR DIA.AJ35 MIN TO ROOT OF DOUBLE HEXAGONOTOL AE Y- U -250ABFIGURE 1 BOLT AEROSPACE STANDARD AS3658 SHEET 2 OF 12 REV. A BOLT, MACHINE - DOUBLE HEXAGON

8、 EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 1A - DASH NUMBERS AND DIMENSIONS B - F DASH NO. NOMINAL THREAD D B C E F MIN DESIGNATION MODIFIED MAJOR DIA. AS870 DASH NO. NOMINAL SIZE -3 -4 -5 -6 -7 -8 -9 -10 -12 -14 -16 .1900 - 32 UNJF - 3A MOD .250

9、0 - 28 UNJF - 3A MOD .3125 - 24 UNJF - 3A MOD .3750 - 24 UNJF - 3A MOD .4375 - 20 UNJF - 3A MOD .5000 - 20 UNJF - 3A MOD .5625 - 18 UNJF - 3A MOD .6250 - 18 UNJF - 3A MOD .7500 - 16 UNJF - 3A MOD .8750 - 14 UNJF - 3A MOD 1.0000 - 12 UNJF - 3A MOD .1840 - .1875 .2435 - .2475 .3053 - .3100 .3678 - .37

10、25 .4294 - .4350 .4919 - .4975 .5538 - .5600 .6163 - .6225 .7406 - .7475 .8647 - .8725 .9886 - .9975 -08 -10 -12 -14 -16 -18 -20 -22 -26 -30 -34 .2500 .3125 .3750 .4375 .5000 .5625 .6250 .6875 .8125 .9375 1.0625 .1885 - .1895 .2485 - .2495 .3110 - .3120 .3735 - .3745 .4360 - .4370 .4985 - .4995 .561

11、0 - .5620 .6235 - .6245 .7485 - .7495 .8735 - .8745 .9985 - .9995 .365 - .385 .455 - .475 .570 - .590 .686 - .706 .802 - .822 .917 - .937 1.032 - 1.052 1.148 - 1.168 1.379 - 1.399 1.610 - 1.630 1.841 - 1.861 .335 .425 .540 .656 .772 .887 1.002 1.118 1.349 1.580 1.811 TABLE 1B - DASH NUMBERS AND DIME

12、NSIONS G - AB & AJ DASH NO. G H MIN K R T MIN U V AB AJ MAX -3 -4 -5 -6 -7 -8 -9 -10 -12 -14 -16 .240 - .260 .302 - .322 .365 - .385 .428 - .448 .490 - .510 .552 - .572 .615 - .635 .677 - .697 .802 - .822 .927 - .947 1.052 - 1.072 .020 .026 .035 .044 .053 .062 .071 .080 .098 .116 .134 .248 - .268 .2

13、93 - .313 .354 - .374 .405 - .425 .462 - .482 .510 - .530 .558 - .578 .635 - .655 .735 - .755 .875 - .895 .975 - .995 .015 -.025 .020 - .030 .026 - .036 .033 - .043 .039 - .049 .045 - .055 .051 - .061 .058 - .068 .070 - .080 .083 - .093 .095 - .105 .122 .144 .166 .188 .210 .232 .254 .336 .371 .442 .

14、512 .114 - .134 .150 - .170 .188 - .208 .225 - .245 .262 - .282 .300 - .320 .338 - .358 .375 - .395 .450 - .470 .525 - .545 .600 - .620 .090 - .110 .140 - .160 .196 - .216 .250 - .270 .300 - .320 .360 - .380 .430 - .450 .490 - .510 .560 - .580 .640 - .660 .730 - .750 .130 - .150 .184 - .204 .239 - .

15、259 .301 - .321 .354 - .374 .416 - .436 .472 - .492 .534 - .554 .650 - .670 .764 - .784 .874 - .894 .154 .199 .247 .294 .340 .389 .440 .488 .576 .665 .756 TABLE 1C - DASH NUMBERS, AND GEOMETRIC TOLERANCES . DASH NO. AC AD AE -3 -4 -5 -6 -7 -8 -9 -10 -12 -14 -16 .006 .007 .008 .010 .010 .012 .013 .01

16、6 .017 .022 .025 .001 .001 .001 .0008 .0008 .0006 .0006 .0006 .0006 .0006 .0006 .003 .003 .003 .003 .003 .003 .003 .003 .003 .005 .005 AEROSPACE STANDARD AS3658 SHEET 3 OF 12 REV. A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI M

17、IN NOTES: 1. FOR PARTS WITH A MINIMUM GRIP LENGTH (DIM N) EQUAL TO OR LESS THAN 1.5D THE THREAD PD (DATUM -Z- ) SHALL REPLACE DATUM -Y- . 2. MATERIAL: COBALT-NICKEL ALLOY PER AMS5842 (UNS R30159). 3. PROCUREMENT SPECIFICATION: AS7475. 4. FLUORESCENT PENETRANT INSPECTION PER ASTM E1417. 5. SURFACE TE

18、XTURE: SYMBOLS PER ASME Y14.36M. REQUIREMENTS PER ASME B46.1. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 in Ra. 6. BREAK SHARP EDGES .003 TO .015, UNLESS OTHERWISE SPECIFIED. 7. DIMENSIONS IN INCHES. 8. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982 (ASME PUBLICATION). 9. DO NOT USE UNASSIGNE

19、D PART NUMBERS. 10. THE PART NUMBER SHALL CONSIST OF THE BASIC PART NUMBER, FIRST DASH NUMBER DESIGNATING THE NOMINAL DIAMETER AND THE SECOND DASH NUMBER DESIGNATING THE MINIMUM GRIP IN SIXTEENTHS (.0625) OF AN INCH. EXAMPLE OF COMPLETE PART NUMBER: - AS3658 - 4 14 BASIC PART NUMBER - - MINIMUM GRIP

20、 = .8750 INCHES NOMINAL DIAMETER = .2500 INCHES - 11. A CHANGE BAR ( L ) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT

21、TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. AS AND AMS ARE SAE INTERNATIONAL PUBLICATIONS. ASME IS AN AMERICAN SOCIETY OF MECHANICAL ENGINEERS PUBL

22、ICATION. ASTM IS AN ASTM INTERNATIONAL PUBLICATION. AEROSPACE STANDARD AS3658 SHEET 4 OF 12 REV. A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 2 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR 0.1900 NOMINAL DIAMTER BOL

23、TS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 AS3658-3-02 AS3658-3-03 AS3658-3-04 AS3658-3-05 AS3658-3-06 AS3658-3-07 AS3658-3-08 AS3658-3-09 AS3658-3-10 AS3658-3-11 AS3658-3-12 AS3658-3-13 AS3658-3-14 AS3658-3-15 AS3658-3-16 AS3658-3-17

24、 .125 .188 .250 .312 .375 .438 .500 .562 .625 .688 .750 .812 .875 .938 1.000 1.062 .198 .261 .322 .385 .448 .510 .572 .634 .698 .760 .822 .884 .948 1.010 1.072 1.134 .610 - .630 .673 - .693 .734 - .754 .797 - .817 .860 - .880 .922 - .942 .984 - 1.004 1.046 - 1.066 1.110 - 1.130 1.172 - 1.192 1.234 -

25、 1.254 1.296 - 1.316 1.360 - 1.380 1.422 - 1.442 1.484 - 1.504 1.546 - 1.566 0.986 1.040 1.093 1.146 1.200 1.253 1.306 1.360 1.414 1.467 1.520 1.574 1.628 1.681 1.734 1.788 AS3658-3-18 AS3658-3-19 AS3658-3-20 AS3658-3-21 AS3658-3-22 AS3658-3-23 AS3658-3-24 AS3658-3-25 AS3658-3-26 AS3658-3-27 AS3658-

26、3-28 AS3658-3-29 AS3658-3-30 AS3658-3-31 AS3658-3-32 1.125 1.188 1.250 1.312 1.375 1.438 1.500 1.562 1.625 1.688 1.750 1.812 1.875 1.938 2.000 1.198 1.260 1.322 1.384 1.448 1.510 1.572 1.634 1.698 1.760 1.822 1.884 1.948 2.010 2.072 1.610 - 1.630 1.672 - 1.692 1.734 - 1.754 1.796 - 1.816 1.860 - 1.8

27、80 1.922 - 1.942 1.984 - 2.004 2.046 - 2.066 2.110 - 2.130 2.172 - 2.192 2.234 - 2.254 2.296 - 2.316 2.360 - 2.380 2.422 - 2.442 2.484 - 2.504 1.842 1.895 1.948 2.002 2.056 2.109 2.162 2.216 2.270 2.323 2.376 2.430 2.484 2.538 2.591 TABLE 3 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR 0.2500 NOMINA

28、L DIAMETER BOLTS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 AS3658-4-02 AS3658-4-03 AS3658-4-04 AS3658-4-05 AS3658-4-06 AS3658-4-07 AS3658-4-08 AS3658-4-09 AS3658-4-10 AS3658-4-11 AS3658-4-12 AS3658-4-13 AS3658-4-14 AS3658-4-15 AS3658-4-

29、16 AS3658-4-17 .125 .188 .250 .312 .375 .438 .500 .562 .625 .688 .750 .812 .875 .938 1.000 1.062 .206 .269 .331 .393 .456 .519 .581 .643 .706 .769 .831 .893 .955 1.019 1.081 1.143 .715 - .735 .778 - .798 .840 - .860 .902 - .922 .965 - .985 1.028 - 1.048 1.090 - 1.110 1.152 - 1.172 1.215 - 1.235 1.27

30、8 - 1.298 1.340 - 1.360 1.402 - 1.422 1.465 - 1.485 1.528 - 1.548 1.590 - 1.610 1.652 - 1.672 1.920 2.013 2.106 2.198 2.291 2.384 2.476 2.569 2.662 2.755 2.847 2.940 3.032 3.125 3.218 3.311 AS3658-4-18 AS3658-4-19 AS3658-4-20 AS3658-4-21 AS3658-4-22 AS3658-4-23 AS3658-4-24 AS3658-4-25 AS3658-4-26 AS

31、3658-4-27 AS3658-4-28 AS3658-4-29 AS3658-4-30 AS3658-4-31 AS3658-4-32 1.125 1.188 1.250 1.312 1.375 1.438 1.500 1.562 1.625 1.688 1.750 1.812 1.875 1.938 2.000 1.206 1.269 1.331 1.393 1.456 1.519 1.581 1.643 1.706 1.769 1.831 1.893 1.956 1.019 2.081 1.715 - 1.735 1.778 - 1.798 1.840 - 1.860 1.902 -

32、1.922 1.965 - 1.985 2.028 - 2.048 2.090 - 2.110 2.152 - 2.172 2.215 - 2.235 2.278 - 2.298 2.340 - 2.360 2.402 - 2.422 2.465 - 2.485 2.528 - 2.548 2.590 - 2.610 3.404 3.496 3.589 3.682 3.774 3.867 3.960 4.052 4.145 4.238 4.331 4.423 4.516 4.609 4.702 AEROSPACE STANDARD AS3658 SHEET 5 OF 12 REV. A BOL

33、T, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 4 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR 0.3125 NOMINAL DIAMETER BOLTS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS

34、 LB/100 AS3658-5-03 AS3658-5-04 AS3658-5-05 AS3658-5-06 AS3658-5-07 AS3658-5-08 AS3658-5-09 AS3658-5-10 AS3658-5-11 AS3658-5-12 AS3658-5-13 AS3658-5-14 AS3658-5-15 AS3658-5-16 AS3658-5-17 AS3658-5-18 AS3658-5-19 AS3658-5-20 AS3658-5-21 .188 .250 .312 .375 .438 .500 .562 .625 .688 .750 .812 .875 .938

35、 1.000 1.062 1.125 1.188 1.250 1.312 .281 .343 .405 .468 .531 .593 .655 .718 .781 .843 .905 .968 1.031 1.093 1.155 1.218 1.281 1.343 1.405 .896 - .916 .958 - .978 1.020 - 1.040 1.083 - 1.103 1.146 - 1.166 1.208 - 1.228 1.270 - 1.290 1.333 - 1.353 1.396 - 1.416 1.458 - 1.478 1.520 - 1.540 1.583 - 1.6

36、03 1.646 - 1.666 1.708 - 1.728 1.770 - 1.790 1.833 - 1.853 1.896 - 1.916 1.958 - 1.978 2.020 - 2.040 3.606 3.751 3.896 4.040 4.185 4.330 4.475 4.620 4.764 4.909 5.054 5.199 5.344 5.488 5.633 5.778 5.923 6.068 6.212 AS3658-5-22 AS3658-5-23 AS3658-5-24 AS3658-5-25 AS3658-5-26 AS3658-5-27 AS3658-5-28 A

37、S3658-5-29 AS3658-5-30 AS3658-5-31 AS3658-5-32 AS3658-5-33 AS3658-5-34 AS3658-5-35 AS3658-5-36 AS3658-5-37 AS3658-5-38 AS3658-5-39 AS3658-5-40 1.375 1.438 1.500 1.562 1.625 1.688 1.750 1.812 1.875 1.938 2.000 2.062 2.125 2.188 2.250 2.312 2.375 2.438 2.500 1.468 1.531 1.593 1.655 1.718 1.781 1.843 1

38、.905 1.968 2.031 2.093 2.155 2.218 2.218 2.343 2.405 2.468 2.531 2.593 2.083 - 2.103 2.146 - 2.166 2.208 - 2.228 2.270 - 2.290 2.333 - 2.353 2.396 - 2.416 2.458 - 2.478 2.520 - 2.540 2.583 - 2.603 2.646 - 2.666 2.708 - 2.728 2.770 - 2.790 2.833 - 2.853 2.896 - 2.916 2.958 - 2.978 3.020 - 3.040 3.083

39、 - 2.103 3.146 - 3.166 3.208 - 3.228 6.357 6.502 6.647 6.792 6.936 7.081 7.226 7.371 7.516 7.660 7.805 7.950 8.095 8.240 8.384 8.529 8.674 8.819 8.964 TABLE 5 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR 0.3750 NOMINAL DIAMETER BOLTS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 PART NUMBER

40、N MIN (GRIP) M MAX L APPROX. MASS LB/100 AS3658-6-03 AS3658-6-04 AS3658-6-05 AS3658-6-06 AS3658-6-07 AS3658-6-08 AS3658-6-09 AS3658-6-10 AS3658-6-11 AS3658-6-12 AS3658-6-13 AS3658-6-14 AS3658-6-15 AS3658-6-16 AS3658-6-17 AS3658-6-18 AS3658-6-19 AS3658-6-20 AS3658-6-21 .188 .250 .312 .375 .438 .500 .

41、562 .625 .688 .750 .812 .875 .938 1.000 1.062 1.125 1.188 1.250 1.312 .281 .343 .405 .468 .531 .593 .655 .718 .781 .843 .905 .968 1.031 1.093 1.155 1.218 1.281 1.343 1.405 .983 - 1.003 1.045 - 1.065 1.107 - 1.127 1.170 - 1.190 1.233 - 1.253 1.295 - 1.315 1.357 - 1.377 1.420 - 1.440 1.483 - 1.503 1.5

42、45 - 1.565 1.607 - 1.627 1.670 - 1.690 1.733 - 1.753 1.795 - 1.815 1.857 - 1.877 1.920 - 1.940 1.983 - 2.003 2.045 - 2.065 2.107 - 2.127 5.698 5.906 6.115 6.323 6.532 6.740 6.949 7.157 7.366 7.574 7.783 7.991 8.200 8.408 8.617 8.825 9.034 9.242 9.451 AS3658-6-22 AS3658-6-23 AS3658-6-24 AS3658-6-25 A

43、S3658-6-26 AS3658-6-27 AS3658-6-28 AS3658-6-29 AS3658-6-30 AS3658-6-31 AS3658-6-32 AS3658-6-33 AS3658-6-34 AS3658-6-35 AS3658-6-36 AS3658-6-37 AS3658-6-38 AS3658-6-39 AS3658-6-40 1.375 1.438 1.500 1.562 1.625 1.688 1.750 1.812 1.875 1.938 2.000 2.062 2.125 2.188 2.250 2.312 2.375 2.438 2.500 1.468 1

44、.531 1.593 1.655 1.718 1.781 1.843 1.905 1.968 2.031 2.093 2.155 2.218 2.281 2.343 2.405 2.468 2.531 2.593 2.170 - 2.190 2.233 - 2.253 2.295 - 2.315 2.357 - 2.377 2.420 - 2.440 2.483 - 2.503 2.545 - 2.565 2.607 - 2.627 2.670 - 2.690 2.733 - 2.753 2.795 - 2.815 2.857 - 2.877 2.920 - 2.940 2.983 - 3.0

45、03 3.045 - 3.065 3.107 - 3.127 3.170 - 3.190 3.233 - 3.253 3.295 - 3.315 9.659 9.868 10.076 10.285 10.493 10.702 10.910 11.118 11.327 11.536 11.744 11.952 12.161 12.370 12.578 12.786 12.995 13.204 13.412 AEROSPACE STANDARD AS3658 SHEET 6 OF 12 REV. A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HE

46、AD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 6 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR 0.4375 NOMINAL DIAMETER BOLTS PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 PART NUMBER N MIN (GRIP) M MAX L APPROX. MASS LB/100 AS3658-7-03 AS3658-7-04 AS3658-7-05 AS

47、3658-7-06 AS3658-7-07 AS3658-7-08 AS3658-7-09 AS3658-7-10 AS3658-7-11 AS3658-7-12 AS3658-7-13 AS3658-7-14 AS3658-7-15 AS3658-7-16 AS3658-7-17 AS3658-7-18 AS3658-7-19 AS3658-7-20 AS3658-7-21 AS3658-7-22 AS3658-7-23 AS3658-7-24 AS3658-7-25 .188 .250 .312 .375 .438 .500 .562 .625 .688 .750 .812 .875 .9

48、38 1.000 1.062 1.125 1.188 1.250 1.312 1.375 1.438 1.500 1.562 .298 .360 .422 .485 .548 .610 .672 .735 .798 .860 .922 .985 1.048 1.110 1.172 1.235 1.298 1.360 1.422 1.485 1.548 1.610 1.672 1.112 - 1.132 1.174 - 1.194 1.236 - 1.256 1.299 - 1.319 1.362 - 1.382 1.424 - 1.444 1.486 - 1.506 1.549 - 1.569

49、 1.612 - 1.632 1.674 - 1.694 1.736 - 1.756 1.799 - 1.819 1.862 - 1.882 1.924 - 1.944 1.986 - 2.006 2.049 - 2.069 2.112 - 2.132 2.174 - 2.194 2.236 - 2.256 2.299 - 2.319 2.362 - 2.382 2.424 - 2.444 2.486 - 2.506 8.822 9.106 9.390 9.674 9.957 10.241 10.525 10.808 11.092 11.376 11.660 11.943 12.227 12.511 12.794 13.078 13.362 13.645 13.929 14.213 14.496 14.780 15.064 AS3658-7-26 AS3658-7-27 AS3658-7-28 AS3658-7-29 AS3658-7-30 AS3658-7-31 AS3658-7-32 AS3658-7-33 AS3658-7-34 AS3658-7-