SAE AS 33391B-2015 PLATE MOUNTING PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS.pdf

《SAE AS 33391B-2015 PLATE MOUNTING PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS.pdf》由会员分享，可在线阅读，更多相关《SAE AS 33391B-2015 PLATE MOUNTING PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 AEROSPACE STANDARD PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS AS33391Copyright 2015 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photoc

2、opying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED2004-04REVISED2015-12THIRD AN

3、GLE PROJECTION CUSTODIAN: AE-8/AE-8C2 REV.B FEDERAL SUPPLY CLASS 5975 AS33391 SHEET 1 OF 2 REV. B PROCUREMENT SPECIFICATION: AS23190 SAE Technical StandardsBoardRulesprovidethat:“ThisreportispublishedbySAE toadvancethestateoftechnicalandengineering sciences. The use of thisreport isentirelyvoluntary

4、, andits applicability andsuitability for any particularuse, includingany patent infringement arising therefrom,is the soleresponsibility of theuser.”SAE reviewseachtechnical reportatleasteveryfiveyearsatwhichtimeitmayberevised,reaffirmed,stabilized,orcancelled. SAEinvites yourwritten comments andsu

5、ggestions.SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS33391B RATIONALE CORRECTING TECHNICAL ERROR IN TABLE 1. USER REQUESTED THE COLOR BLACK BE REINSTATED TO THE SPECIFICATION. THEY NEED THE UV RESISTANCE AND THESE MOUNTS

6、ARE USED WITH THE BLACK -0 STRAPS. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS23190. FIGURE 1 - MS3339 MOUNTING PLATE CONFIGURATION TABLE 1 - FIGURE 1 DIMENSIONS .203 AEROSPACE STANDARD AS33391 SHEET 2 OF 2 REV

7、. B PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS TABLE 2 - COLOR DESCRIPTION COLOR DASH NO. COLOR -0 BLACK -9 NATURALADDITIONAL REQUIREMENTS: 1. MATERIAL: NYLON PER ASTM D4066-94B (REF. AS23190) 2. REMOVE ALL BURRS AND SHARP EDGES. BREAK ALL SHARP CORNERS, MOLD MARKS AND NORMA

8、L VENT FLASH ARE PERMISSIBLE. NOTES: 1. ALL DIMENSIONS ARE IN INCHES. 2. EXAMPLE OF PART NUMBER: MS3339 -1 -9 COLOR DASH NUMBER ITEM DASH NUMBER MS NUMBER 3. PART NUMBER SHALL APPEAR ON PACKAGE. APPLICATION NOTE: 1. AS33391 IS NOT RECOMMENDED FOR NEW DESIGN. SPECIFICATION NOTE: 1. REVISION INDICATOR

9、: A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.