SAE ARD 50046-1993 RMS Information Sourcebook.pdf

《SAE ARD 50046-1993 RMS Information Sourcebook.pdf》由会员分享，可在线阅读，更多相关《SAE ARD 50046-1993 RMS Information Sourcebook.pdf（78页珍藏版）》请在麦多课文档分享上搜索。

1、e-= TheEngineering-wFor Advancing Mobility-Land Sea Air and SpaceINTERNATIONAL400 Commonwealth Drive. Warrendale. PA 15096 -0001AEROSPACERESOURCEDOCUMENTI = ARD50046*Issued 1993-11RMS INFORMATION SOURCEBOOK1. SCOPE:This publication was developed to fill the need for a single, consolidated reference

2、to sourcesof reliability, maintainability and supportability (RMS) data and information. The SAE G-l 1committee is concerned with whether a certain type of RMS data exists and how and where itcan be obtained. While various bibliographic publications do exist, there has been noconvenient source docum

3、ent consolidating information about all types of data sources -books, periodicals, organizations, on-line databases, etc. - covering military industrial,commercial and professional societies. This publication is intended to provide a ready sourcefor this type of information.Revised to incorporate co

4、mmittee and subcommittee comments and suggestions. 9/93IS A NONCONSENSUS DRAFT REPORT MADESAE TECHNICAL COMMIITEE DURING THE PROCESSOF STANDARDS DEVELOPMENT. THE INFORMATION CONTAINED IN THISREPORT IS BEING DISSEMINATED SOLELY FOR COMMENT PURPOSEAND SHOULD NOT BE RELIED UPON AT THIS TIME.SAE Technic

5、al Standards Board Rules provide that: This report is published by SAE to advance the state of technical and engineeringsciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patentinfringement arising therefrom, is the sol

6、e responsibility of the user.*Copyright 1993 Society of Automotive Engineers, Inc.All rights reserved. Printed in U.S.A.SAE ARD50046FOREWORDThis publication was developed to fill the need for a single, consolidated reference tosources of reliability, maintainability and supportability (RMS) data and

7、 information.The SAE G-11 committee is concerned with whether a certain type of RMS data existsand how and where it can be obtained. While various bibliographic publications doexist, there has been no convenient source document consolidating information aboutall types of data sources - books, period

8、icals, organizations, on-line databases, etc. -covering military industrial, commercial and professional societies. This publication isintended to provide a ready source for this type of information.While it would be virtually impossible to identify all sources of RMS information anddata, an attempt

9、 has been made in this publication to identify those sources which arethe most readily available and most helpful to the assurance technology practitioner.This document is organized into five chapters:Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5Introduction and Usage - Describes the purpose for thi

10、spublication and the process by which information is keptcurrent through periodic updates.Organizations - Government, military, professional, andeducational groups which support reliability and qualitydisciplines.Publications - Proceedings, journals, newsletters,periodicals, and books containing rel

11、iability data andinformation.Databases - Automated and semi-automated databasescontaining component and system reliability data.Electronic Bulletin Boards - On-line resources for reliabilityinformation exchange.The data sources listed cover a broad spectrum. Some focus on DOD needs; othersserve a li

12、mited segment of the industrial community. Access to some data sources isrestricted, while others are open to any and all users. Some sources are available at nocost to the user, where others charge the user for their information. Where possiblethese distinctions have been made in the text. No matte

13、r what specific informationneeds you may have, this text will tell you how to get the information you need.-2-SAE ARD50046TABLE OF CONTENTS ICHAPTER ONE - INTRODUCTION AND USAGE . 9CHAPTER TWO - ORGANIZATIONSDOD INFORMATION ANALYSIS CENTERS . 10Reliability Analysis Center (RAC) . 11Data and Analysis

14、 Center for Software (DACS) 12Crew System Ergonomics Information Analysis Center (CSERIAC). 13Nondestructive Testing Information Analysis Center (NTIAC) . 14Supportability Investment Decision Analysis Center (SIDAC) 15OTHER GOVERNMENTAL ORGANIZATIONS . 15Government-Industry Data Exchange Program (GI

15、DEP). . 15National Technical Information Service (NTIS) 19Defense Technical Information Center (DTIC) 19Defense Logistics Studies Information Exchange (DLSIE) 20Naval Publications and Forms Directorate 21DOD AGENCIES . 21Air Force “R acquisition management; Adaand other programming language techniqu

16、es and methods; software life cycledevelopment- including requirements definition, design, coding, integration,testing and acceptance; software failures; test methodologies; software qualitymetrics and measurements; reliability and cost modeling; standards and guidesfor software development and main

17、tenance; software engineering techniquesand tools; and software technology research, improvements, and training.DACS DATABASESl Software Engineering Bibliographic Database (SEB)l Robotics and Artificial Intelligence Database (RAID)l Software Engineering Research Projects Database (SERP)l Software Li

18、fe Cycle Experience Database (SLED)l Software Engineering Tools Information Database (SETI)SEB contains collected citations from texts, technical reports, journals, periodicalsand proceedings on a wide variety of software engineering topics. The RAID andSERI? databases contain project information on

19、 R information storage and retrieval; attention allocation; perceptualorganization; human language processing; operator motor control; effects ofenvironmental stress; and operational workload, and control and displayinterfaces (real and virtual). Various information products will be developedincludi

20、ng the following: handbooks and data books; state-of-the-art reports;critical reviews; technology assessments; research directories, abstracts, andindexes; and currents awareness bulletins. In addition, CSERIAC offers a varietyof services including: responding to technical and bibliographic inquirie

21、s,providing support for revision and development of military standards and- 13 -SAE ARD50046specifications, and maintaining and implementing computer based models ofhuman operators. CSERIAC sponsors symposia, workshops, conferences,colloquia, and short courses to apprise scientists and engineers of

22、importantdevelopments in crew system ergonomics and to provide opportunities forprofessional development.Contact:CSERIAC Program OfficeAL/CFH/CSERIACWright-Patterson Air Force BaseDayton, OH 454336573Attn: Dr. Lawrence Howell (Associate Director)Telephone: (513) 2554842DSN: 785-4842FAX: (513) 255-48

23、23Nondestructive Testing Information Analysis Center (NTIAC)Techniques and Process - All Nondestructive Testing (NDT), NondestructiveEvaluation (NDE), and Nondestructive Inspection (NDI), utilizing techniquesand processes involving material-energy interaction phenomena whereby amaterial, component o

24、r an entire system can be so characterized as to reliability,predict its presence, or performance under a prescribed service regime.Radiographic, holographic, acoustic, magnetic and other related phenomena arewithin the NTIAC scope. The use of nondestructive sensors for manufacturingand materials pr

25、ocess control, and for intelligent or adaptive control applications,is also within the purview of NTIAC. Other information of concern to NTIACincludes economic aspects of the NDE industry, economic considerations withrespect to selection of techniques and processes; industry trends in applyingcurren

26、t NDE technologies in research and development, production,maintenance, safety monitoring, failure prevention of in-service material, and lifeassurance. As a national resource of NDE/NDI technology, NTIAC will providefast reaction time to service inquiries for analysis, especially where field andmil

27、itary systems are involved or where potential failure or quality situations mayarise. In addition to providing customized literature searches onNDT/NDE/NDI, NTIAC has a variety of state-of-the-art reports available onspecialized NDE topics and copies of conference proceedings for NDE Symposiaheld in

28、 San Antonio since 1969. NTIAC receives guidance from the Tri-ServiceNondestructive Testing Steering Committee and supports the Committee onMaterials (COMAT) Working Group on NDE.- 14 -1 SAE ARD50046Contact:NTIACTexas Research Institute-Austin415A Crystal Creek DriveAustin, TX 787466201Attn: Dr. Geo

29、rge Matzkanin (Director)Telephone: (512) 263-2106FAX: (512) 263-3530Supportability Investment Decision Analysis Center (SIDAC)At the present time, SIDAC is not a formal part of the DOD IAC program.However, SIDAC offers a library, an information base, a set of logistics models,easy access to data sou

30、rces and a staff of experts in supportability, logistics,modeling and information systems. SIDAC is operated in Dayton by Battelle.Other companies on the SIDAC Team include Frontier Engineering, SynergyIncorporated, The Analytic Sciences Corporation and Wright State University.SIDAC publishes monthl

31、y bulletins and a quarterly newsletter. For moreinformation, or to be placed on the SIDAC mailing list, call 800-54-SIDAC.SIDAC also has an on-line bulletin board system, available by dialing 800-53-SIDAC.Contact:Supportability Investment Decision Analysis Center (SIDAC)5100 Springfield Pike, Suite

32、311Dayton, OH 45431-1231Attn: Steven Schenk (Director)Telephone: (513) 2586720BBS: (513) 258-6766OTHER GOVERNMENTAL ORGANIZATIONSGovernment-Industry Data Exchange Program (GIDEP)The GIDEP (Government-Industry Data Exchange Program) is a cooperativeactivity between government and industry seeking to

33、reduce or eliminateduplicate expenditures of time and money by making maximum use of existingknowledge. The program provides a means to exchange technical data essentialin the research, design, development, production and operational phases of thelife cycle of systems and equipment. Primary objectiv

34、es are to improve reliability,quality, productivity, safety, and logistics support.- 15 -SAE ARD50046GlDEP is chartered on behalf of the Joint Logistics Commanders and provides forfull interaction of government and industry activities. By the Commandersagreement, the Navy provides executive manageme

35、nt for the program. TheProgram Manager exercises authority over planning, direction and managementof GlDEP. He is located within the Office of the Assistant Secretary of the Navy(S theapproved and nonstandard parts information can be of great value during thedesign parts selection process. Reliabili

36、ty engineers find the failure rate andmode information valuable in R they are inter-industry agreements in non-regulatedspheres of economic activity. National voluntary standards are often directadoptions of IS0 standards, even though such adoptions are also voluntary.Voluntary standards may also be

37、 used in regulated spheres of economic activity,at the discretion of the regulator involved.IS0 cooperates with other international and regional organizations. It preparesstandards for magnetic and optical media, software engineering, electronic datainterchange, application portability, programming

38、languages, computergraphics, microprocessor systems,multimedia/hypermedia.interfaces, security techniques andContact:International Organization for Standardization (ISO)Central Secretariat1, Rue de VarembeCH-1211 Geneva 20Switzerland- 29 -SAE ARD50046Telephone: +4122 749 0111FAX: +4122 733 3430Natio

39、nal Institute of Standards and Technology (NIST)The National Institute of Standards and Technology (NIST) was established bythe United States Congress “to assist industry in the development of technology . .needed to improve product quality, to modernize manufacturing processes, toensure product rel

40、iability . . and to facilitate rapid commercialization . . ofproducts based on new scientific discoveries.”A principal agency of the Commerce Departments Technology Administration,NIST has as its goals: to aid U.S. industry through research and services, tocontribute to the public health and safety,

41、 and to support the U.S. scientific andengineering research communities.The National Computer Systems Laboratory (NCSL) is one of NISTs majorscience and engineering research components. NCSLs programs seek to over-come barriers to the efficient use of computer systems, to the cost-effectiveexchange

42、of information and to the protection of valuable information resourcesin computer systems. NCSLs technical work is carried out in five divisions:Information Systems Engineering Division, Systems and Software TechnologyDivision, Computer Security Division, Advanced Systems Division, and Systemsand Ne

43、twork Architecture Division.Contact:National Institute of Standards and Technology (NIST)Gaithersburg, MD 20899Telephone: (301) 975-2000COMMERCIAL ORGANIZATIONSGlobal Information Services - Global Engineering DocumentsGlobal Engineering Documents is a licensed reprinting facility for domestic,foreig

44、n national, and international societies and institutions. Among otherservices offered, Global sells the same DOD documents that are available fromNaval Publications, but guarantees much faster delivery. Next day delivery andfacsimile service is available. All specifications and standards are available inmicrofilm or microfiche form as well as in hard copy.Contact:Global Engineering Documents1990 M Street N.W., Suite 400Washington, DC 20036Telephone: (800) 854-7179 or (202) 429-2860- 30 -