PIA-TB-242-2000 Fabric Strength Testing of “Orphaned” Reserve Canopies《Xx的织物强度测试 备用伞盖[代替 PIA PIA-TB-302]》.pdf

《PIA-TB-242-2000 Fabric Strength Testing of “Orphaned” Reserve Canopies《Xx的织物强度测试 备用伞盖[代替 PIA PIA-TB-302]》.pdf》由会员分享，可在线阅读，更多相关《PIA-TB-242-2000 Fabric Strength Testing of “Orphaned” Reserve Canopies《Xx的织物强度测试 备用伞盖[代替 PIA PIA-TB-302]》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、9/16/2000 TB-242 1 of 1 Formally TB-302 PIA Technical Bulletin TB-242 Parachute Industry Association Publications September 16, 2000 Fabric Strength Testing of “Orphaned” Reserve Canopies Because of the recent discovery of a G.Q. Security Lopo parachute manufactured in 12-81 that failed pull testing

2、 during a routine inspection and repack procedure, the PIA Technical Committee recommends: 1) All “orphaned” (manufacturer is no longer in business) round reserve/emergency canopies manufactured prior to January 1990 with mesh covered vents be tensile tested per PIA TS-108 (“Parachute Canopy Fabric Pull Test, Non-Destructive Method”) at the next inspection/repack. 2) That this pull test be repeated on an annual basis. 3) Report all test results to techcomPIA.com - include mfg, model, S/N, DOM, panels tested, fabric colors, etc.