NFPA 1122-2013 Code for Model Rocketry (Effective Date 6 18 2012).pdf

《NFPA 1122-2013 Code for Model Rocketry (Effective Date 6 18 2012).pdf》由会员分享，可在线阅读，更多相关《NFPA 1122-2013 Code for Model Rocketry (Effective Date 6 18 2012).pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、NFPA 1122 Code for Model Rocketry 2013 Edition NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards Organization Become a Member Subscribe to the Register for Seminars, Webinars, and Online Courses Visit the NFPA CatalogNOTICE AND DISCLAIMER OF LIABILITY CONCERNING T

2、HE USE OF NFPA DOCUMENTS NFPA codes, standards, recommended practices, and guides (“NFPA Documents”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. This process brings together vol

3、unteers representing varied viewpoints and interests to achieve consensus on fire and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any informa

4、tion or the soundness of any judgments contained in NFPA Documents. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or re

5、liance on NFPA Documents. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Documents available, the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity.

6、 Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given cir

7、cumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA Documents. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certification or other statement of compliance w

8、ith the requirements of this document shall not be attributable to the NFPA and is solely the responsibility of the certifier or maker of the statement. ISBN: 978-145590438-9 (Print) ISBN: 978-145590487-7 (PDF) 8/12 IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCUMENTS IMPORTANT NOTICES AND DI

9、SCLAIMERS CONCERNING NFPA DOCUMENTS ADDITIONAL NOTICES AND DISCLAIMERS Updating of NFPA Documents Users of NFPA codes, standards, recommended practices, and guides (“NFPA Documents”) should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended

10、from time to time through the issuance of Tentative Interim Amendments. An official NFPA Document at any point in time consists of the current edition of the document together with any Tentative Interim Amendments and any Errata then in effect. In order to determine whether a given document is the c

11、urrent edition and whether it has been amended through the issuance of Tentative Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications such as the National Fire Codes Subscription Service, visit the NFPA website at www.nfpa.org, or contact the NFPA at

12、the address listed below. Interpretations of NFPA Documents A statement, written or oral, that is not processed in accordance with Section 6 of the Regulations Governing Committee Projects shall not be considered the official position of NFPA or any of its Committees and shall not be considered to b

13、e, nor be relied upon as, a Formal Interpretation. Patents The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an NFPA Document. The users of NFPA Documents bear the sole responsibility for determining the va

14、lidity of any such patent rights, as well as the risk of infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA Documents. NFPA adheres to the policy of the American National Standards Institute (ANSI) regarding

15、the inclusion of patents in American National Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy: NOTICE: The users attention is called to the possibility that compliance with an NFPA Document may require use of an invention covered by patent rights.

16、NFPA takes no position as to the validity of any such patent rights or as to whether such patent rights constitute or include essential patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has filed a statement of willingness to grant licenses un

17、der these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license, copies of such filed statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the address listed below. Law and Regulations Users of NFPA

18、Documents should consult applicable federal, state, and local laws and regulations. NFPA does not, by the publication of its codes, standards, recommended practices, and guides, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so

19、. Copyrights NFPA Documents are copyrighted by the NFPA. They are made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of safe practices and methods. By

20、 making these documents available for use and adoption by public authorities and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Documents for regulatory purposes should be accomplished through adoption by reference. The term “adoption by reference” mea

21、ns the citing of title, edition, and publishing information only. Any deletions, additions, and changes desired by the adopting authority should be noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents, adopting authorities are requested to

22、notify the NFPA (Attention: Secretary, Standards Council) in writing of such use. For technical assistance and questions concerning adoption of NFPA Documents, contact NFPA at the address below. For Further Information All questions or other communications relating to NFPA Documents and all requests

23、 for information on NFPA procedures governing its codes and standards development process, including information on the procedures for requesting Formal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA documents during regular revision cycles, should b

24、e sent to NFPA headquarters, addressed to the attention of the Secretary, Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02169-7471; email: stds_adminnfpa.org For more information about NFPA, visit the NFPA website at www.nfpa.org. 12/11Copyright 2012 National Fire Protectio

25、n Association . All Rights Reserved. NFPA 1122 Codefor ModelRocketry 2013Edition This edition of NFPA 1122, Code forModel Rocketry, was prepared by the Technical Commit- tee on Pyrotechnics. It was issued by the Standards Council on May 29, 2012, with an effective date of June 18, 2012, and supersed

26、es all previous editions. This edition of NFPA 1122 was approved as an American National Standard on June 18, 2012. OriginandDevelopmentofNFPA1122 NFPA 1122 was originally created as a tentative code by the Technical Committee on Pyrotechnics as NFPA 41L, Code for Model Rocketry. It was adopted tent

27、atively in May 1967 and adopted officially by the Association in May 1968. In November 1976, a major revision of NFPA 41L, including its redesignation as NFPA 1122L,CodeforUnmannedRockets, was adopted. The 1976 edition was revised by the Technical Committee on Pyrotechnics in 1980 to elimi- nate the

28、 “L” designation and to delete the requirements for cold-propellant model rocket motors, which are no longer allowed because of their use of chlorofluorocarbons (Freon 12). Other technical changes were made at that time. Those revisions were adopted at the 1981 NFPA Fall Meeting, and the new documen

29、t became the 1982 edition. Amendments to the 1982 edition were processed at the 1986 NFPA Fall Meeting, resulting in the 1987 edition. Because of the rapid progress in consumer rocket technology and the emergence of the commercial space transportation industry, the 1987 edition was amended, and its

30、title was changed back to NFPA 1122, Code for Model Rocketry, for the 1994 edition. For the 1997 edition, the terminology and provisions relating to reloadable solid- propellant model rockets and reloadable solid-propellant model rocket motors were incorpo- rated into the document for consistency wi

31、th changes made to federal regulations that af- fected the model rocketry industry. These changes in federal regulations occurred after the previous edition of this code had been adopted. These changes were reflected throughout the document. In addition, the citations for federal regulations were up

32、dated throughout the document to reflect changes made to those regulations since the previous edition of the Code had been prepared. Other changes were editorial in nature to bring the document into compliance with NFPA style. The 2002 edition included a new edition of the National Association of Mo

33、del Rocketry Model Rocket Safety Code. Other changes included the deletion of material covered by NFPA 1125, Code for the Manufacture of Model Rocket and High Power Rocket Motors, that was no longer needed in NFPA 1122. The code also was revised to comply with the Manual of Style for NFPATechnical C

34、ommittee Documents. The 2008 edition incorporated minor revisions to the standard; several definitions were amended to comply with the NFPA Glossary of Terms. The 2013 edition provides updates to federal regulation citations and references. The definitions for model rocket motor and high power rocke

35、t motor have been revised to more clearly distinguish them from each other. Weight limits for model rockets have been modified in accordance with new FAA regulations. Safe spectator distances have now been established for simultaneous launches of more than 10 rockets. 11221 NFPA and National Fire Pr

36、otection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169.TechnicalCommitteeonPyrotechnics RachelRobbins, Chair Natural Resources Canada, Canada E KennethL.Kosanke, Secretary PyroLabs, Incorporated, CO SE GregoryS.Altland, City of York Fi

37、re/Rescue Services, PA E RichardBowes, Natural Resources Canada, Canada RT W.G.Bulifant,III, Dominion Fireworks, Inc., VA U AnthonyJ.Cesaroni, Cesaroni Technology Inc., FL M EdwardL.Cochran, Minneapolis, MN SE JohnA.Conkling, Chestertown, MD SE RandallW.A.Davidson, Risk International on the use of pyrotechnic special effects before a proximate audience; on the manufacture, transpor- tation, storage for use of military, automotive, agricultural, and industrial pyrotechnics. 11223 COMMITTEE PERSONNEL 2013 Edition