1、LNOTE: The document identifier rindhatding has been changed onthis page to reflect that this is a perfommncc spccificntion. Thereare no other changes to this document. The document identifier onsubsequent pages has not been chttngcd, but vill be changed thenext time this document is mviscd.IJ distri
2、bution is ttniimki. . .Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-.141L-L-82815(OS)STANDARDSFEDEMLFED-STD-101 Test Procechmes for Packaging MaterialsFED-STD-313 Material Scfety Data, Transportation DaCA andDispoBal Data for Hazardous Materials F
3、urnishedto Government ActivitiesMILITARY141L-STD-129 Marking for Shipment a71nd Storage(Unless otherwise indicated, copies of federal and military specifications,standards and handbooks are available from Military Specifications andStandards, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5
4、094.)2.1.2 Other Covent documents, drawings, and publications. Thefollowing other Government documents, drawings, and publications form a part ofthis document to the extent specified herein. Unless otherwise specified, zheissues are those cited in the solicitation.CODE OF FEDERAL RECUMTIONS (Cm)49 C
5、FR 100-199 Transportation(Application for copiez of CFRa should be a71ddrassed to the Superintendentof Documents, U.S. Government Printing Office, Washington, D.C. 20402-0001.)NAVAL SEA SYSTEM COMMAND (CAGE Code 10001)UR 43 Preparation of Quality Assurance Provisions (IncludingClassification of Char
6、acteristics)(Copiec of WR 43 a71re a71vailable from the Commanding Officer, NavalPublications a71nd Forms Center, Attn: 1053, 5801 Tabor Avenue, Philadelphia, PA19120-5094.)2.2 Non-Covorrment publications. The following documents form a71 part ofthis document to the extent specified herein. Unless o
7、therwise specified, theissues of the documents which are DOD a71dopted a71re chose listed in the issue ofthe DODISS cited in the solicitation. Unleca otherwise specified, the issues ofdocuments not listed in the DOL)ISSa71re the issues of the documents clteii In thesolicitation (see 6.2).AMERICAN TR
8、UCKING ASSOCIATION, INC.National Motor Freight Classification? -Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-L-82815(OS)-(Application for copies should be a71ddreamed to the American Ttucking Asso-ciation, Inc. , Attn: Traffic DepE., 2200 Hill
9、 Road, Alexandria, VA 22314-4677.)NATIONAL RAXUtOAD FREIGHT CXMW!TEEUniform Freight Classification (UFC) 6000(Application for copies should be a71ddmsaod to the National RailroadFreighe Committee, 222 South Riverside Plaza, Suite 1120, Chicago, IL 60606-5945.).AKEKICAN SOCJRY FOR TESTING AND lMTERIA
10、LS (ASTM)ASTND 1875 Density of Adhesives in Fluid Form (DoD adopted)(Appllcatlon for copies should be a71ddressed to the American Society forTesting and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.)(Non-Govermeent scandetds and other publications are normally a71vailablefrom the organiz
11、ations chat prepare or distribute ehe documents. Thesedocuments also may be available in or through libraries or other informationalsemices. )L 2.3 Or&r of precedence. In the event of a conflict between the eext ofthis document and the references cited herein, the text of this document takespreceden
12、ce. Nothing in this document, however, supersedes applicable laws a71ndregulations unless a71 specific exemption has been obtained.3.3.1 First a71rticle. When specified (see 6.2), a sample of the antistaticliquid shall be subjected to first article inspection (see 6.4) in accordancewith 4.3.3.2 Rope
13、rties. Physical and chemical properties of the antistatic liquidshall be in a71ccordance with table !.3.3 Sfoq.3.3.1 Toxic products and formubtiona. The material a71hall have no a71dversea71ffect on the health of personnel uhon usad for its intended purpose. Questionspartbamt to this sffscc shall be
14、 raferred by the contracting a71ctivity to theappropriate departmental medical a71ewice who will act as an dvtsor to thecontracting agancy (see 4,1.2).3.3,2 Xaterial Safety Data Sheets (?MDS). Thecontractor shall preparea71nd submit an MSDS in accordance with PED-STD-313 as specified in the contract
15、(see 6.2).3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-L-82815(OS)TI, Property IMnimum MaxlnlumDensity, lb/gal 8.17 8.57Static decay, seconds - 2.00Ionic content (percent wt/wt)Fluoride - .001Chloride - .001Sulfate - .001Phosphate - .001-3.4
16、Shelf lift. The antistatic liquid shell have an unlimited shelf lifewhen stored at 80 20*F.3.5 Uor-hip. The workmanship shall be such that the a71ntistatic liquidis free from contamination and defects that could render it unsuitable for itsintended use.k. QUAUTY ASSUMNCE FROVIS1ONS4.1 M9aponalbiMQ f
17、or inspection. Unhss othendse specified in thecontract or purchase order, the contractor is responsible for the performance ofall inspection requfrementc (examinations and tests) specified herein. Exceptas othexnrisespecified in the contract or purchase order, the contractor may usehis own or a71ny
18、other facilities suitablo for the perfomene a71 of the inspectionrequirements specified herein, unless disapproved by the Government. TheGovernment resees the right to perfo ny of the nspections set forth in thespecification where such inspections are deemed necessary to ensure supplies &ndservices
19、conform to prescribed requirements.4.1.1 Rosponsfbility for compliance. All items shall meet allrequirements of sections 3 and 5. The inspection set forth in thisspecification shall become a part of the contractors overall inspection systemor quality program. The a71baence of a71ny inspection requir
20、ements in thespecification shall not relieve tie contractor of the responsibility of ensuringthat all products or supplies submitted to the Oovent for acceptance complywith a71ll roquirnts of the contract. Sampling inspection, es part ofmanufacturing operations, is an a71cceptable practice to ascert
21、ain conformance torequirements, however, this does not a71uthorize submission of known defectivematerial, either indicated or actual, nor does it commit the Government toaccept defective material.4.1.2 Toxicological product formulations. The contractor shall have thetoxicological product formulation
22、s a71nd a71ssociated information a71vailable for4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-HIL-L-82815(OS)-review by the contracting =ctLvity to a71valuete the safety of the material forthe proposed use.4.2 Classification of inspections. The in
23、spection requirements specifiedherein are classified as follovs:First article inspection (see 4.3).: Quality conformance Lnspectlon (see 4.4).4.3 First article Inepectton. First article lnapection shall consist ofche quality conformance inspection (see 4.4). Failuro to meet all of therequirements sp
24、ecified herein shall be cause for rejection of the first articlesample.4.4 Qudlty conformance inspection. Quality conformance LnspeccLon shallconsist of the examination and tests specified in table 11.TABLE 11.Tests and Examinations Requirement Te6t MethodVisual a71xamination 3,5 and Section 5 4.s.1
25、DensiEy 3.2 &.5.2Static decay 3.2 4.5.3Ionic contentl/ 3.2 4.5.4b A1/ Unless otheise specified, contractor certificationverifying conformance to this requirement shall berequired.4.4.1 bt. A lot shall consist of all antistatic liquid subject toinspection a71t the same time from one of the following:
26、a, A single batch (see 6.3.1)b. A continuous process (see 6.3.2)c. A uniform blend of batches or a uniform blend of portions from acontinuous process.4.4.2 Soling. Sampling shall be in accordance with table Ill.4.4.3 Classification of characteristics. The characteristics verified bythe inspections h
27、erein are classified as !fajoror Minor in a71ccordance with UR-43. Inspections that verify Hajor characteristics are identified by the symbolProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-!4XL-L-U2815(OS)-(M) . The number following the classificatio
28、n symbol indicates the serial numberof the inspection. Inspections which a71re not a71nnotated with a71 classificationcode and serial number are classified minor.Number of Containers Number of Containersin bt to be Selected1-3 All4 - 15 316 - 25 426 - 40 561 - 65 766 - 110 10111 - 180 154.5 Inspecti
29、on Dethods. The following inspection methods shall be used.Unless otherwise specified in the a71pplicable test method, all weights, volumes,temperatures, and times shall be measured to the nearest specified unit ordecimal.NOTE:h.5.lconformance4.5.2ASTM D 1075.Reagent grade chemicals shall be used fo
30、r chemical reactions in theconduct of a71ll tests defined herein. Solvents and indicators may be -commercialnonreagent grade materials.vi8ual examination. VLeual examination shall be made to verifyto the requirements of 3.5 a71nd a71ectton S.Density. Density (lb/gal) shall be determined in accordanc
31、e with4.5.3 static -y (Mlol). Static decay slmll be determined in accordancewith FED-STD-101, Hethod 40461, to S00 volts a71t 15 percent relative humidity.The specimens used for the tesr shall be 5 x 3 x 1 inch blocks of polyethylenefoam conforming to PPP-C-1752, we V, Claas 2 and Type 111, Class 2,
32、 with theantistatic liquid applied by spray or dip process.4.5.4 Ionic content. Ionic content shall be determined using ionchromatography.4.6 Impaction of packaging. The antistatic liquid containers andcontainer markings shall be visuslly examined to verify compliance with section5.-Provided by IHSN
33、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-.HIL-L-82815(OS)5. PACKAGING-5.1 paCh&i. Unless othe-ise spoclfiod in the contract or order see6.2), packaging shall be level C as specified herein.5.i.I level C. The antistatic liquid shall be packaged to afford adequ
34、ateprotection against 10BS, contamination, deterioration, and damage duringshipment from the supply source to the first receiving activity a71nd duringstorage under the shelf life period and conditions specified in 3.4. Containersin the same shipment shall be of the same size. The pechging shall con
35、form toUFC 6000, National Motor Freight Classification, 49 CPR 171-178, or to othercarrier rules and regulations as a71pplicable to the mode of transportation.5.2 C4arklng.5.2.1 Srdmarkhg. In addition co any special marking required bythe contract or order (see 6.2, interior and exterior containers
36、shall bemarked in accordance with !41L-sTD-129.5.2.2 Special usrking. In addition to the marking requirements of 5.2.1,each container marking shall include the following:Title, number, and date of this specification.:. Manufacturers name and address.Date of manufacture.: Shelf life expiration deee.e
37、. Storage conditions.f. Toxicity warning (if applicable).6. WXZS(This section contains information of a general or explanatory nature thatmay be helpful, but is not mandatory.)6.1 Intended use. The antistatic liquid is intended for use in themanufacture of rocket motor shipping containers.6.2 Acquis
38、ition roquirenn. Acquisition documents must specify thefollowing:a71 a15 Title, number and date of this specification.b E-me of DODXSS ts be citad in the nolicitatlon, and if requir=d.the specific issue of individual documents referenced (see 2.1.1and 2.1.2),c. Whether first article inspection is re
39、quired (see 3.1 and 6.4)d. Materiel Safety Data Shaets Required (see 3.3.2 and 6.6)7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-HIL-L-82815(OS)-a71 a15 DOD FAR 52.246-15 (ace tabl. 11)f. Special marking, if other than a71s apeclfied in 5.2.2g. Sa
40、fety precautions required (see 6.7)6.3 Defimitioms.6.3.1 Baa. A batch is that amount ofin the manufacturing process.6.3.2 Continuous process. A continuousantimteticprocess isprocess of manufacture from which, in one unbroken flow,is accumulated for the lot.liquid aade as one unitan Unintermptedthe a
41、71ntistatic liquid6.4 First article. Uhen first article inspection 1s required, thecontracting officer should provide specific guidance to offerors whether theitem(s) should be a preproduction sample, a first article sample, a firstproduction item, a71 sample selected from the first production items
42、, or astandard production Item from the contractors current inventory (see 3.1), andthe nuaber of items to be tested a71s a71pecifiad in 4.3. The contracting offic.rshould also include specific instructions in a71cquisition documents regardinga71rrangements for examinations, a71pproval of first a71r
43、ticle test results, anddisposition of first articles. Invitations for bids should provide that theGovernment resenes the right to waive the requirement for samples for firstarticle inspection to those bidders offering a71 product which has been previouslya71cquired or tested by the Ceverxment, end t
44、hat bidders offering such produces,who wih to rely on such production or test, must furnish evidence with the bidthat prior Covent a71pproval is presently +proprlatc for &a pendingcontract. Bidders should not submit alternate bids unless specificallyrequested to do so in the solicitation,6.5 Possibl
45、e material. The followingmaterial has been found to meet therequirements of this specification. This is given for information only and isnot restrictive. RESQUE 2 manufactured by M Laboratories, Inc., Fullerton,California, has been found to meet the requirements of this specification.6.6 Material Sa
46、fa4 Data sheets. 14SDS requireaants a71re applicable to thisspecification a71nd should be specified in the contract a71s required by the FederalAcquisition Regulation (FAR) Part 23, subpart 23.3. Contracting officers willidentify those activities requiring copies of cleted Material Safety DataSheets
47、 prepared in a71ccordance with FED-STD-313. The pertinent Govemsenta71ailing a71ddrasses for sulmi.ssion of data a71ro listed in PED-STD-313.6.7 Safety precautions. The safety precaution requirements of the“Contractors Safety Manual for Ammunition, Explosives, and Related DangerousMaterialw (DOD 414
48、5.26M) are applicable and should be specified in the contractas required by the i)OD FAR Supplement 28,7102. NOTE: Uhen this specification8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-L-82815(OS)is used as part of the description of work to be
49、 a71ccomplishedby a Governmentactivity, the safety precaution requlremencs of “tiunition a71nd ExplosivesA6hore” (OP5) should be made applicable.6.8 S&ject term (key word) li6tlmg.Rocket Motor, Dual Thrust, Hk 104Stanchrd !lirisile. .Prepuing Activity:NAw-os(Project 1340-N802)LProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IH
