FORD WSS-M1C274-A-2008 GREASE SYNTHETIC PTFE TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯(PTFE)合成润滑脂(供与FORD WSS-M99P1111-A一起使用)》.pdf
-
资源ID：751617
资源大小：18.21KB
全文页数：2页
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD WSS-M1C274-A-2008 GREASE SYNTHETIC PTFE TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯(PTFE)合成润滑脂(供与FORD WSS-M99P1111-A一起使用)》.pdf
1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Ver 1 2008 06 12 Activated G Barr, FOE Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 GREASE, SYNTHETIC, PTFE WSS-M1C274-A 1. SCOPE This material defined by this specification is an NLGI 2 synthetic g
2、rease containing PTFE particles held in suspension. 2. APPLICATION This specification was originally released to aid the prevention of aluminum wheels seizing to ferrous hubs. The grease is also required to be compatible with the ABS wheel badges and therefore must not induce cracking. 3. REQUIREMEN
3、TS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 SPECIFIC REQUIREMENTS 3.2.1 Color White, translucent 3.2.2 Cone Penetration 260 - 300 (ASTM D 217) 3.2.3 Density 0.83 g/ml (ASTM D 1480) 3.2.4 Dropping Point 220 C (ASTM D 2265) 3.2.5 Oil Separation 220 C (ASTM D 92) 3.2.9.3 Pour Point -50 C (ASTM D 97) 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification.
