FORD ESK-M99J326-A-2005 MARKING INK TO BE USED WITH FORD WSS-M99P1111-A 《标记墨水 与标准FORD WSS-M99P1111-A一起使用 》.pdf
-
资源ID：746524
资源大小：58.87KB
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD ESK-M99J326-A-2005 MARKING INK TO BE USED WITH FORD WSS-M99P1111-A 《标记墨水 与标准FORD WSS-M99P1111-A一起使用 》.pdf
1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 08 30 Revised Inserted 3.0; Revised 3.6, Deleted 3.7 and 4 1994 12 20 Revised & Retyped Was 3 pages 1984 11 15 Released SM/EQ 5495 TP Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 1 MARKING INK ES
2、K-M99J326-A 1. SCOPE The material defined by this specification is a fast drying marking ink. 2. APPLICATION This specification was originally released for material which is used as a paint marker for identification of steel parts. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS M
3、aterial suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 COLOR As indicated on drawing. 3.2 ADHESION Adequate adhesion to degreased steel. 3.3 FLASH POINT The flash point shall conform to the safety regulations applicable
4、to the plant and/or country where the material shall be used. 3.4 HIDING POWER One application by marking ink pen to degreased steel shall adequately hide the substrate. 3.5 DRYING TIME Tackfree: After maximum 1 minute at room temperature. 3.6 SUBSTANCE CONTROL Legal, health, safety and environmental constraints may apply to the materials which are submitted for approval to this specification. Refer to Engineering Material Specification WSS-M99P9999-A1.
