FORD ESF-M91J3-A-2005 PAINT ALUMINUM HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐热铝漆 与标准FORD WSS-M99P1111-A一起使用 》.pdf
-
资源ID：746310
资源大小：59.72KB
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD ESF-M91J3-A-2005 PAINT ALUMINUM HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐热铝漆 与标准FORD WSS-M99P1111-A一起使用 》.pdf
1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 09 12 Revised Inserted 3.0; Deleted 3.9 and 4 1985 06 14 Revised CE3P-RD863100-E162 F. O. Swanson 1963 07 17 Released F6-1082 Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 1 PAINT, ALUMINUM, HEAT
2、RESISTANT ESF-M91J3-A 1. SCOPE The material defined by this specification is a medium heat resistant paint (260 C maximum). 2. APPLICATION This material was released originally for coating shielded spark plugs. 3. REQUIREMENTS 3.1 COLOR Aluminum 3.2 NON-VOLATILE, min 35% (FLTM BI 102-01) 3.3 PIGMENT
3、, min Leafing aluminum, 86 g/L 3.4 VEHICLE Vegetable oil modified resin 3.5 VISCOSITY #4 FORD CUP AT 27 C 20 - 25 s (FLTM BI 111-01) 3.6 FILM THICKNESS As specified on the engineering drawing. 3.7 RESISTANCE TO HEAT After 24 h at 246 - 260 C, there shall be no blistering or peeling of paint film. 3.8 SHELF STABILITY This material must not jell, liver or hard set after aging for 30 days at 27 C. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 BAKING TIME at 121 C 20 minutes
