FORD ESF-M1L44-A-2006 CABLE-STRANDED VINYL INSULATED EXTRA FLEXIBLE) #19 GAGE TO BE USED WITH FORD WSS-M99P1111-A 《乙烯树脂绝缘的超高柔性绞合电缆》.pdf
-
资源ID：746118
资源大小：24.39KB
全文页数：3页
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD ESF-M1L44-A-2006 CABLE-STRANDED VINYL INSULATED EXTRA FLEXIBLE) #19 GAGE TO BE USED WITH FORD WSS-M99P1111-A 《乙烯树脂绝缘的超高柔性绞合电缆》.pdf
1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 11 06 Revised ESF-M1L44-B Revised 3.2; 3.3 Para 3.6 after the bend test, the cable shall pass the dielectric breakdown test, para 3.5.3. 3.5.5 Cold Resistance A straight specimen shall be reduced to a temperature of -40 C at a rate not to
2、 exceed 50 C/min. After maintaining this temperature for 3 h and while still at this low temperature, the cable shall be wrapped around a mandrel 25 mm in diameter at the uniform rate of one turn in 10 s for 4 full turns. The insulation shall be removed for a distance of 25 mm from each end of the s
3、pecimen and the specimen subjected to the dielectric test, para 3.5.3. 3.5.6 Flame Test A 610 mm specimen shall be suspended in a vertical position within a partial enclosure which allows a flow of sufficient air for complete combustion but is free from drafts. The tip of a 50 mm gas flame with an inner cone one-third its height shall then be applied to the end of the specimen for 15 s. After removal of the flame, the specimen shall not continue to burn for more than 90 s. 3.5.7 Abrasion Resistance, min 508 mm of tape (SAE J1128, 1 lb (0.45 kg) weight)
