欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    DLA MS9196 REV B-2010 TEE TUBE - SAE-AMS5646 BOSS.pdf

    • 资源ID:693930       资源大小:96.29KB        全文页数:9页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    DLA MS9196 REV B-2010 TEE TUBE - SAE-AMS5646 BOSS.pdf

    1、 MS9196B 16 February 2010 SUPERSEDING MS9196A (ASG) 11 May 1962 DETAIL SPECIFICATION SHEET TEE, TUBE - SAE-AMS5646, BOSS This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of t

    2、his specification sheet and SAE-AS4841. FIGURE 1. Tee, tube, boss. AMSC N/A FSC 4730INCH-POUND Inactive for new design after 20 September 2000. Inches mm .005 .020 .030 0.13 0.51 0.76 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9196B 2 Dash num

    3、ber Tube OD (reference) inches (mm) A diameter inches (mm) B inches (mm) +.015 (0.38) -.000 C diameter inches (mm) +.000 -.010 (0.25) -02 .125 (3.18) .058 (1.47) - .065 (1.65) .144 (3.66) .245 (6.22) -03 .188 (4.78) .121 (3.07) - .128 (3.25) .144 (3.66) .307 (7.80) -04 .250 (6.35) .168 (4.27) - .175

    4、 (4.45) .160 (4.06) .359 (9.12) -05 .313 (7.95) .230 (5.84) - .237 (6.02) .160 (4.06) .421 (10.69) -06 .375 (9.53) .293 (7.44) - .301 (7.65) .165 (4.19) .476 (12.09) -07 .438 (11.13) .355 (9.02) - .363 (9.22) .165 (4.19) .539 (13.69) -08 .500 (12.70) .387 (9.83) - .395 (10.03) .229 (5.82) .654 (16.6

    5、1) -09 .562 (14.27) .434 (11.02) - .442 (11.23) .229 (5.82) .716 (18.19) -10 .625 (15.88) .480 (12.19) - .488 (12.40) .255 (6.48) .767 (19.48) -11 .688 (17.48) .542 (13.77) - .552 (14.02) .304 (7.72) .875 (22.23) -12 .750 (19.05) .604 (15.34) - .614 (15.60) .304 (7.72) .938 (23.83) -14 .875 (22.23)

    6、.729 (18.52) - .739 (18.77) .304 (7.72) 1.062 (26.97) -16 1.000 (25.40) .839 (21.31) - .851 (21.62) .312 (7.92) 1.188 (30.18) -18 1.125 (28.58) .948 (24.08) - .960 (24.38) .312 (7.92) 1.375 (34.93) -20 1.250 (31.75) 1.073 (27.25) - 1.086 (27.58) .363 (9.22) 1.500 (38.10) -24 1.500 (38.10) 1.307 (33.

    7、20) - 1.320 (33.53) .374 (9.50) 1.750 (44.45) -28 1.750 (44.45) 1.542 (39.17) - 1.557 (39.55) .447 (11.35) 2.125 (53.98) -32 2.000 (50.80) 1.776 (45.11) - 1.791 (45.49) .457 (11.61) 2.375 (60.33) FIGURE 1. Tee, tube, boss - Continued. Provided by IHSNot for ResaleNo reproduction or networking permit

    8、ted without license from IHS-,-,-MS9196B 3 Dash number D diameter inches (mm) .003 (0.08) F diameter inches (mm) +.002 (0.05) -.003 (0.08) (see notes 5 and 6) G diameter inches (mm) H inches (mm) .010 (0.25) J inches (mm) .010 (0.25) -02 .132 (3.35) .250 (6.35) .240 (6.10) .208 (5.28) .317 (8.05) -0

    9、3 .195 (4.95) .312 (7.92) .300 (7.62) .208 (5.28) .346 (8.79) -04 .242 (6.15) .364 (9.25) .350 (8.89) .250 (6.35) .398 (10.11) -05 .304 (7.72) .426 (10.82) .415 (10.54) .250 (6.35) .398 (10.11) -06 .368 (9.35) .481 (12.22) .470 (11.94) .278 (7.06) .398 (10.11) -07 .430 (10.92) .544 (13.82) .535 (13.

    10、59) .278 (7.06) .398 (10.11) -08 .462 (11.73) .660 (16.76) .650 (16.51) .312 (7.92) .489 (12.42) -09 .509 (12.93) .722 (18.34) .710 (18.03) .312 (7.92) .489 (12.42) -10 .555 (14.10) .773 (19.63) .765 (19.43) .357 (9.07) .585 (14.86) -11 .619 (15.72) .882 (22.40) .870 (22.10) .417 (10.59) .663 (16.84

    11、) -12 .681 (17.30) .945 (24.00) .935 (23.75) .417 (10.59) .663 (16.84) -14 .808 (20.52) 1.070 (27.18) 1.055 (26.80) .417 (10.59) .710 (18.03) -16 .918 (23.32) 1.195 (30.35) 1.185 (30.10) .417 (10.59) .720 (18.29) -18 1.027 (26.09) 1.382 (35.10) 1.365 (34.67) .417 (10.59) .767 (19.48) -20 1.153 (29.2

    12、9) 1.507 (38.28) 1.495 (37.97) .417 (10.59) .767 (19.48) -24 1.387 (35.23) 1.756 (44.60) 1.745 (44.32) .417 (10.59) .889 (22.58) -28 1.652 (41.96) 2.131 (54.13) 2.120 (53.85) .417 (10.59) 1.017 (25.83) -32 1.886 (47.90) 2.381 (60.48) 2.370 (60.20) .417 (10.59) 1.142 (29.01) FIGURE 1. Tee, tube, boss

    13、 - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9196B 4 Dash number K inches (mm) .010 (0.25) M min inches (mm) N inches (mm) +.010 (0.25) -.000 -02 .682 (17.32) .030 (0.76) .125 (3.18) -03 .682 (17.32) .030 (0.76) .131 (3.33) -04 .74

    14、8 (19.00) .030 (0.76) .140 (3.56) -05 .748 (19.00) .030 (0.76) .140 (3.56) -06 .813 (20.65) .030 (0.76) .156 (3.96) -07 .813 (20.65) .030 (0.76) .172 (4.37) -08 .903 (22.94) .030 (0.76) .187 (4.75) -09 .903 (22.94) .030 (0.76) .203 (5.16) -10 1.018 (25.86) .030 (0.76) .219 (5.56) -11 1.122 (28.50) .

    15、030 (0.76) .234 (5.94) -12 1.122 (28.50) .030 (0.76) .234 (5.94) -14 1.122 (28.50) .030 (0.76) .234 (5.94) -16 1.122 (28.50) .030 (0.76) .234 (5.94) -18 1.122 (28.50) .030 (0.76) .234 (5.94) -20 1.122 (28.50) .030 (0.76) .234 (5.94) -24 1.122 (28.50) .030 (0.76) .234 (5.94) -28 1.205 (30.61) .044 (1

    16、.12) .234 (5.94) -32 1.320 (33.53) .044 (1.12) .234 (5.94) FIGURE 1. Tee, tube, boss - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9196B 5 Dash number P inches (mm) Q inches (mm) .010 (0.25) S inches (mm) +.010 (0.25) Thread T (see n

    17、ote 11) -02 .020 (0.51) - .050 (1.27) .707 (17.96) 1.000 (25.40) .3125 - 24UNF - 3A -03 .020 (0.51) - .050 (1.27) .764 (19.41) 1.000 (25.40) .375 - 24UNF - 3A -04 .030 (0.76) - .060 (1.52) .826 (20.98) 1.115 (28.32) .4375 - 20UNF - 3A -05 .030 (0.76) - .060 (1.52) .889 (22.58) 1.140 (28.96) .500 - 2

    18、0UNF - 3A -06 .040 (1.02) - .070 (1.78) .998 (25.35) 1.270 (32.26) .5625 - 18UNF-3A -07 .040 (1.02) - .070 (1.78) .998 (25.35) 1.305 (33.15) .625 - 18UNF 3A -08 .040 (1.02) - .070 (1.78) 1.195 (30.35) 1.460 (37.08) .7500 - 16UNF - 3A -09 .040 (1.02) - .070 (1.78) 1.195 (30.35) 1.490 (37.85) .8125 -

    19、16UN - 3A -10 .050 (1.27) - .080 (2.03) 1.411 (35.84) 1.680 (42.67) .8750 - 14UNF - 3A -11 .050 (1.27) - .080 (2.03) 1.614 (41.00) 1.855 (47.12) 1.000 - 12UNF - 3A -12 .050 (1.27) - .080 (2.03) 1.614 (41.00) 1.885 (47.88) 1.0625 - 12UN - 3A -14 .050 (1.27) - .080 (2.03) 1.768 (44.91) 1.945 (49.40) 1

    20、.1875 - 12UN - 3A -16 .050 (1.27) - .080 (2.03) 1.778 (45.16) 2.010 (51.05) 1.3125 - 12UN - 3A -18 .050 (1.27) - .080 (2.03) 2.027 (51.49) 2.100 (53.34) 1.500 - 12UNF - 3A -20 .050 (1.27) - .080 (2.03) 2.027 (51.49) 2.165 (54.99) 1.625- 12UN - 3A -24 .050 (1.27) - .080 (2.03) 2.293 (58.24) 2.290 (58

    21、.17) 1.8750 - 12UN - 3A -28 .050 (1.27) - .080 (2.03) 2.777 (70.54) 2.625 (66.68) 2.2500 - 12UN - 3A -32 .050 (1.27) - .080 (2.03) 3.027 (76.89) 2.975 (75.57) 2.500 - 12UN - 3A FIGURE 1. Tee, tube, boss - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license

    22、 from IHS-,-,-MS9196B 6 Dash number Thread TT (see note 11) Size Major diameter inches (mm) Pitch diameter inches (mm) Minor diameter max inches (mm) -02 .3125 24UNS-3A .3023 (7.678) - .3095 (7.861) .2797 (7.104) - .2824 (7.173) .2584 (6.563) -03 .375 24UNS-3A .3648 (9.266) - .3720 (9.449) .3420 (8.

    23、687) - .3449 (8.760) .3209 (8.151) -04 .4375 20UNS-3A .4264 (10.831) - .4345 (11.036) .3989 (10.132) - .4020 (10.211) .3732 (9.479) -05 .500 20UNS-3A .4889 (12.418) - .4970 (12.623) .4613 (11.717) - .4645 (11.798) .4357 (11.067) -06 .5625 18UNS-3A .5508 (13.990) - .5595 (14.211) .5200 (13.208) - .52

    24、34 (13.294) .4913 (12.479) -07 .625 18UNS-3A .6133 (15.578) - .6220 (15.799) .5824 (14.793) - .5859 (14.881) .5538 (14.067) -08 .750 16UNS-3A .7376 (18.735) - .7470 (18.974) .7026 (17.846) - .7064 (17.942) .6703 (17.026) -09 .8125 16UNS-3A .8001 (20.323) - .8095 (20.561) .7653 (19.44) - .7689 (19.53

    25、0) .7328 (18.613) -10 .875 14UNS-3A .8617 (21.887) - .8720 (22.149) .8215 (20.866) - .8256 (20.970) .7844 (19.924) -11 1.000 12UNS-3A .9856 (25.034) - .9970 (25.324) .9385 (23.838) - .9429 (23.950) .8948 (22.728) -12 1.0625 12UNS-3A 1.0481 (26.622) - 1.0595 (26.911) 1.0012 (25.430) - 1.0054 (25.537)

    26、 .9573 (24.315) -14 1.1875 12UNS-3A 1.1731 (29.797) - 1.1845 (30.086) 1.1261 (28.603) - 1.1304 (28.712) 1.0823 (27.490) -16 1.3125 12UNS-3A 1.2981 (32.972) - 1.3095 (33.261) 1.2511 (31.778) - 1.2554 (31.887) 1.2073 (30.665) -18 1.500 12UNS-3A 1.4856 (37.734) - 1.4970 (38.024) 1.4381 (36.528) - 1.442

    27、9 (36.650) 1.3948 (35.428) -20 1.625 12UNS-3 1.6106 (40.909) - 1.6220 (41.199) 1.5635 (39.713) - 1.5679 (39.825) 1.5198 (38.603) -24 1.875 12UNS-3 1.8606 (47.259) - 1.8720 (47.549) 1.8134 (46.060) - 1.8179 (46.175) 1.7698 (44.953) -28 2.250 12UNS-3A 2.2356 (56.784) - 2.2470 (57.074) 2.1884 (55.585)

    28、- 2.1929 (55.700) 2.1448 (54.478) -32 2.500 12UNS-3A 2.4856 (63.134) - 2.4970 (63.424) 2.4429 (62.050) - 2.4383 (61.933) 2.3948 (60.828) FIGURE 1. Tee, tube, boss - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9196B 7 Dash number U ra

    29、dius inches (mm) V inches (mm) W inches (mm) X inches (mm) Y inches (mm) -02 .062 (1.57) .250 (6.35) .400 (10.16) .200 (5.08) .300 (7.62) -03 .062 (1.57) .312 (7.92) .400 (10.16) .220 (5.59) .310 (7.87) -04 .062 (1.57) .375 (9.53) .500 (12.70) .260 (6.60) .360 (9.14) -05 .062 (1.57) .438 (11.13) .58

    30、0 (14.73) .300 (7.62) .420 (10.67) -06 .094 (2.39) .500 (12.70) .650 (16.51) .330 (8.38) .490 (12.45) -07 .094 (2.39) .562 (14.27) .650 (16.51) .330 (8.38) .490 (12.45) -08 .094 (2.39) .688 (17.48) .850 (21.59) .430 (10.92) .640 (16.26) -09 .094 (2.39) .750 (19.05) .880 (21.59) .440 (11.18) .660 (16

    31、.76) -10 .094 (2.39) .812 (20.62) 1.000 (25.40) .500 (12.70) .750 (19.05) -11 .094 (2.39) .938 (23.83) 1.000 (25.40) .500 (12.70) .750 (19.05) -12 .094 (2.39) 1.000 (25.40) 1.000 (25.40) .500 (12.70) .750 (19.05) -14 .125 (3.18) 1.125 (28.58) 1.000 (25.40) .500 (12.70) .750 (19.05) -16 .125 (3.18) 1

    32、.250 (31.75) 1.000 (25.40) .500 (12.70) .750 (19.05) -18 .125 (3.18) 1.438 (36.53) 1.200 (30.48) .600 (15.24) .900 (22.86) -20 .125 (3.18) 1.625 (41.28) 1.200 (30.48 .600 (15.24) .900 (22.86) -24 .125 (3.18) 1.812 (46.02) 1.200 (30.48) .600 (15.24) .900 (22.86) -28 .188 (4.78) 2.188 (55.58) 1.320 (3

    33、3.53) .660 (16.76) .990 (25.15) -32 .250 (6.35) 2.438 (61.93) 1.500 (38.10) .750 (19.05) 1.125 (28.58) FIGURE 1. Tee, tube, boss - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9196B 8 NOTES: 1. Dimensions are in inches. 2. Metric equi

    34、valents are given for information only. 3. Unless otherwise specified tolerances for linear dimensions are .015 inch (0.38 mm) and angular dimensions are 5, all diameters shall be concentric within .010 inch (0.25 mm) FIM. 4. Unless otherwise specified machined surfaces to be 125 inches (3.18m) in a

    35、ccordance with ASME B46.1. 5. Diameter F shall be free of thread marks. 6. Diameter F shall be concentric with PD of thread within .0025 inch (1.134 mm) FIM. 7. Lettering height: For size -02 through -04 dimension: .020 - .040 inch (0.51 - 1.02 mm). For size -05 through -16 dimension: .040 - .060 in

    36、ch (1.02 - 1.52 mm). For size -18 and larger dimension: .090 - .150 inch (2.29 - 3.81 mm). 8. Parting line mismatch .015 inch (0.38 mm) max. 9. Unless otherwise specified break sharp edges .003 - .015 inches (0.08 - 0.38 mm). 10. Dimensions are to sharp corners unless otherwise specified. 11. All th

    37、reads shall be in accordance with FED-STD-H28/2. FIGURE 1. Tee, tube, boss - Continued. REQUIREMENTS: Dimensions and configurations: See figure 1. Material: Steel, corrosion and heat-resistant in accordance with SAE-AMS5646. Max operating temperature: Oxidation resistance up to 1500F (816C). Max ope

    38、rating pressure: 1500 psi (10 MPa). Finish: Passivate in accordance with SAE-AMS2700, method 1. All parts shall be fluorescent penetrant inspected in accordance with ASTM E1417. PIN: MS9196 -08 PIN Example: MS9196-08 identifies a tee .500 inch (tube), CRES. Do not use unassigned PINs. The approximat

    39、e weight for each fitting is shown in table I Specification sheet number Elbow size (see figure 1) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS9196B 9 TABLE I. Approximate weight. Dash number Approx Weight lbs/ea (grams/ea) Dash number Approx W

    40、eight lbs/ea (grams/ea) -02 .033 (15) -11 .528 (239) -03 .047 (21) -12 .569 (258) -04 .066 (30) -14 .691 (313) -05 .085 (39) -16 .811 (368) -06 .108 (49) -18 1.207 (547) -07 .124 (56) -20 1.347 (611) -08 .239 (108) -24 1.780 (807) -09 .272 (123) -28 3.249 (1474) -10 .361 (164) -32 4.166 (1890) Inten

    41、ded usage: Jet engine, miscellaneous parts, oil, fuel, and de-icing kits. Not to be used on hydraulic, oxygen or applications requiring pressures of 3000 psi (21 MPa). Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue

    42、 due to the extent of the changes. Referenced documents. In addition to SAE-AS4841, this document references the following: FED-STD-H28/2 ASME B46.1 ASTM E1417 SAE-AS478 SAE-AMS2700 SAE-AMS5646 CONCLUDING MATERIAL Custodians: Preparing activity: Navy - AS DLA - CC DLA - CC (Project 4730-2009-082) Re

    43、view activity: Navy - SA NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-


    注意事项

    本文(DLA MS9196 REV B-2010 TEE TUBE - SAE-AMS5646 BOSS.pdf)为本站会员(周芸)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开