1、BSI Standards PublicationPD CEN/TS 16454:2013Intelligent transport systems ESafety ECall end to endconformance testingCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 16
2、454:2013 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TS16454:2013.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can beobtained on
3、request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79013 3ICS 03.220.20; 35.240.60Compliance wi
4、th a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by
5、 IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 16454:2013TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16454 June 2013 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - ES
6、afety - ECall end to end conformance testing Systmes de transport intelligents - ESafety - De bout en bout les essais de conformit Intelligente Transportsysteme - eSicherheit - Vollstndige Konformittsprfungen fr eCall This Technical Specification (CEN/TS) was approved by CEN on 31 December 2012 for
7、provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to an
8、nounce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of
9、 the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
10、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All ri
11、ghts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TS 16454:2013: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN
12、/TS 16454:2013CEN/TS 16454:2013 (E) 2 Contents Page Foreword 8 Introduction .9 1 Scope . 10 2 Conformance . 10 2.1 General . 10 2.2 General conditions . 10 3 Normative references . 11 4 Terms and definitions 13 5 Symbols and abbreviations . 17 6 General overview of the eCall transaction for pan-Euro
13、pean eCall 18 7 How to use this standard . 22 7.1 Layout and procedures 22 7.2 System under test . 23 7.3 Accelerated test procedures . 23 7.4 Accelerated test procedures for IVSs . 24 7.4.1 Accelerated test procedures for all types of PE eCall IVS . 24 7.4.2 Additional accelerated test procedures f
14、or PE eCall only IVS . 25 7.5 Accelerated test procedures for MNOs 26 7.6 Accelerated test procedures for PSAPs PE eCall 27 7.7 Accelerated test procedures for PSAPs TPS-eCall 28 7.8 Accelerated test procedures for TPSPs . 28 8 Requirements 28 8.1 Requirements - General objectives . 28 8.1.1 State t
15、ransitions . 28 8.1.2 Classification of testing . 39 8.1.3 CTP naming conventions . 41 8.1.4 CTP naming convention for IVS conformance tests . 42 8.2 CTP structure 42 9 Conformance test requirements for in-vehicle user equipment and systems (IVS) 44 9.1 Conformance test requirements for in-vehicle u
16、ser equipment and systems for Pan European eCall . 44 9.2 Test objectives and purposes 44 9.3 Classification of testing and referenced tests for in-vehicle user equipment for Pan European eCall IVS . 44 9.3.1 Taxonomy of testing . 44 9.3.2 Referenced tests . 44 9.4 State transition conformance tests
17、 for in-vehicle equipment and system to comply to standards for pan European eCall 45 9.4.1 Conformance requirement . 45 9.4.2 Use case test objectives by stage. 45 9.4.3 CTP 1.1.0.1 Conformance to ETSI TS 102 936-1 and ETSI TS 102 936-2 PE eCall IVS 48 9.4.4 CTP 1.1.0.2 Test for conformance to vali
18、d SIM/USIM PE eCall 49 9.4.5 CTP 1.1.0.3 Automatic eCall triggering does not occur when ignition OFF PE eCall IVS 50 9.4.6 CTP 1.1.1.1 Power on and self test PE eCall IVS . 51 9.4.7 CTP 1.1.2.1 eCall automatically activated PE eCall IVS 52 9.4.8 CTP 1.1.2.2 Automatically triggered eCall in progress
19、was not disconnected upon a new eCall trigger PE eCall IVS 53 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 16454:2013CEN/TS 16454:2013 (E) 3 9.4.9 CTP 1.1.2.3 Post-s
20、ide-crash performance of automatic trigger - IVS . 54 9.4.10 CTP 1.1.2.4 Post-frontal-crash performance of automatic trigger - IVS . 55 9.4.11 CTP 1.1.2.5 Performance of automatic trigger different crash types - IVS 56 9.4.12 CTP 1.1.3.1 eCall manually activated PE eCall IVS 57 9.4.13 CTP 1.1.3.2 Ma
21、nually triggered eCall in progress was not disconnected upon a new eCall trigger PE eCall IVS 58 9.4.14 CTP 1.1.4.1 Test eCall activated PE eCall IVS 59 9.4.15 CTP 1.1.5.1 Network registration PE eCall IVS . 60 9.4.16 CTP 1.1.5.2 Manual termination of eCall by vehicle occupants not allowed (automati
22、cally triggered eCall) PE eCall IVS 61 9.4.17 CTP 1.1.5.3 Manual termination of eCall by vehicle occupants not allowed (manually triggered eCall) PE eCall IVS . 62 9.4.18 CTP 1.1.5.4 Automatically triggered eCall in progress was not disconnected when ignition is switched to OFF PE eCall IVS . 63 9.4
23、.19 CTP 1.1.5.5 Manually triggered eCall in progress was not disconnected when ignition is switched to OFF PE eCall IVS . 64 9.4.20 CTP 1.1.5.6 Priority over conflicting communication PE eCall IVS 65 9.4.21 CTP 1.1.5.7 Network registration is re-tried when network registration attempt was not succes
24、sful PE eCall IVS . 66 9.4.22 CTP 1.1.6.1 Mute IVS and vehicle audio PE eCall IVS . 66 9.4.23 CTP 1.1.7.1 Set-up TS12 call with eCall identifier (flag) set to automatic PE eCall IVS . 67 9.4.24 CTP 1.1.8.1 Set-up TS12 call with eCall identifier (flag) set to manual PE eCall IVS 68 9.4.25 CTP 1.1.9.1
25、 Set-up TS11 call to test number PE eCall IVS 69 9.4.26 CTP 1.1.10.1 eCall is attempted when no networks are available (limited service condition) PE eCall IVS 70 9.4.27 CTP 1.1.10.2 Re-dial attempt completed within 2 min after eCall is dropped PE eCall IVS . 71 . 71 9.4.28 CTP 1.1.10.3 Duration of
26、eCall Initiation signal PE eCall IVS . 72 9.4.29 CTP 1.1.11.1 Send MSD with indicator set to Automatically Initiated eCall (AleC) PE eCall IVS . 73 9.4.30 CTP 1.1.12.1 Send MSD with indicator set to Manually Initiated eCall (MleC) PE eCall IVS . 74 9.4.31 CTP 1.1.13.1 Send MSD with indicator set to
27、Test Call PE eCall IVS . 75 9.4.32 CTP 1.1.14.1 Verify MSD transfer PE eCall IVS 76 9.4.33 CTP 1.1.14.2 Un-mute IVS audio when AL-ACK received PE eCall IVS . 77 9.4.34 CTP 1.1.15.1 Establish voice link to PSAP PE eCall IVS . 78 9.4.35 CTP 1.1.15.2 MSD transfer request while eCall conversation in pro
28、gress PE eCall IVS . 79 9.4.36 CTP 1.1.15.3 Call continuation when SEND MSD request not received (T5 expired) PE eCall IVS . 81 9.4.37 CTP 1.1.15.4 Call continuation when AL-ACK not received (T6 expired) PE eCall IVS 82 9.4.38 CTP 1.1.15.5 MSD is transferred continuously until T7 expires and IVS rec
29、onnects loudspeaker and microphone on its expiry PE eCall IVS . 83 9.4.39 CTP 1.1.16.1 Clear down call automatically PE eCall IVS . 84 9.4.40 CTP 1.1.16.2 IVS clears down the eCall upon T2 expiry PE eCall IVS . 85 9.4.41 CTP 1.1.16.3 IVS registers recent eCalls PE eCall IVS 86 9.4.42 CTP 1.1.17.1 Ca
30、ll-back allowed by IVS PE eCall IVS 87 9.4.43 CTP 1.1.17.2 Call-back answered by IVS PE eCall IVS 88 9.4.44 CTP 1.1.17.3 MSD transfer occurs upon PSAP request during call-back PE eCall IVS . 89 9.4.45 CTP 1.1.17.4 Remain registered for 1 hr PE eCall IVS . 90 9.5 State transition test scripts for in-
31、vehicle equipment and system to comply to standards for pan European eCall additional tests for eCall only systems . 91 9.5.1 General . 91 9.5.2 CTP 1.1.1.2 IVS does not perform registration after power-up PE eCall only IVS 92 9.5.3 CTP 1.1.1.3 IVS periodically scans and maintains a list of availabl
32、e PLMNs PE eCall only . 92 9.5.4 CTP1.1.10.4 Verify that PLMN registration procedure is executed upon initiating an eCall PE eCall only IVS . 93 9.5.5 CTP 1.1.17.5 Remain registered for 1 hr 12 hr PE eCall only IVS 94 9.6 State transition conformance test requirements for in-vehicle user equipment f
33、or eCall TPS-IVS via a third party service provider 95 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS 16454:2013CEN/TS 16454:2013 (E) 4 9.6.1 General . 95 9.6.2 Test o
34、bjectives and purposes . 95 9.6.3 Taxonomy of testing and referenced tests 95 9.6.4 Taxonomy of testing . 95 9.7 Use case conformance tests for in-vehicle equipment and system to comply to standards for third party service provider eCall 95 9.7.1 Conformance requirement . 95 9.7.2 Use case test obje
35、ctives by stage. 96 9.8 State transition test scripts for TPS in-vehicle equipment and system to comply to standards for third party services supported eCall 98 9.8.1 General . 98 9.8.2 CTP 1.2.0 Pre operation - TPS-IVS 99 9.8.3 CTP 1.2.1 Power on self test - TPS-IVS . 101 9.8.4 CTP 1.2.2 Automatica
36、lly activate eCall - TPS-IVS . 103 9.8.5 CTP 1.2.3 Manually activate eCall - TPS-IVS . 111 9.8.6 CTP 1.2.4 Stop conflicting communication TPS-IVS 115 9.8.7 CTP 1.2.5 Establish voice link to TPSP - TPS-IVS 116 9.8.8 CTP 1.2.6 Send IVS dataset to TPSP - TPS-IVS 120 9.8.9 CTP 1.2.7 Establish voice link
37、 between PSAP and occupants - TPS-IVS 124 9.8.10 CTP 1.2.8 Cleardown call - TPS-IVS . 125 9.8.11 CTP 1.2.9 Allow call-cack into vehicle - TPS-IVS 126 10 Conformance tests for mobile network operators 130 10.1 Test objectives and purposes 130 10.1.1 General . 130 10.1.2 Default assumptions 130 10.2 T
38、axonomy of testing and referenced tests 130 10.3 Use case conformance tests for mobile network operator systems to comply to standards for pan European eCall 130 10.3.1 Conformance requirement . 130 10.3.2 Use case test objectives by stage. 130 10.4 State transition test scripts for mobile network o
39、perators to demonstrate compliance with Pan European eCall standards 132 10.4.1 General . 132 10.4.2 CTP 2.0.1 Keep SIMs/USIMs alive even though not in regular operation MNO 133 10.4.3 CTP 2.0.2 MNO supports general eCall relevant requirements . 134 10.4.4 CTP 2.0.3 Decommission SIM/USIM - MNO 135 1
40、0.4.5 CTP 2.0.4 Support eCall Flag MNO . 136 10.4.6 CTP 2.1.1 Accept registration Home network MNO 137 10.4.7 CTP 2.1.2 Accept registration Roaming MNO 138 10.4.8 CTP 2.2.1.1 Receive TS12 voice call (automatically initiated) MNO 139 10.4.9 CTP 2.2.1.2 Route call to most appropriate PSAP MNO . 140 10
41、.4.10 CTP 2.2.1.3 Provide TS12 data/caller ID MNO 141 10.4.11 CTP 2.2.2.1 Receive TS12 voice call (manual initiated) MNO . 142 10.4.12 CTP 2.2.3.1 Test for receiving test eCall (TS11) . 143 10.4.13 CTP 2.2.3.2 Route call to non-emergency number MNO 144 10.4.14 CTP 2.2.3.3 Provide TS11 data MNO . 145
42、 10.4.15 CTP 2.3.1 Call in progressMNO 145 10.4.16 CTP 2.4.1 Call cleardown MNO 146 10.4.17 CTP 2.5.1 Support call-back MNO . 147 10.4.18 CTP 2.6.1 Maintain registration for 1-12 h MNO 147 10.4.19 CTP 2.7.1 Maintain call records - MNO 147 10.5 Use case conformance tests for mobile network operator s
43、ystems to comply to standards for TPS-eCall . 148 10.5.1 Conformance requirement . 148 10.5.2 Use case test objectives by stage. 148 10.6 State transition test scripts for mobile network operators to demonstrate compliance with TPS-eCall standards . 149 10.6.1 CTP 2.11.1 MNO supports general TPS-eCa
44、ll relevant requirements . 149 10.6.2 CTP 2.11.2 Support call-back MNO . 150 11 Conformance tests for PSAP systems . 151 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN/TS
45、 16454:2013CEN/TS 16454:2013 (E) 5 11.1 Test objectives and purposes . 151 11.2 Taxonomy of testing and referenced tests . 151 11.2.1 Taxonomy of testing . 151 11.2.2 Referenced tests 151 11.3 Use case conformance tests for PSAP systems to comply to standards for pan European eCall 151 11.3.1 Confor
46、mance requirement 151 11.3.2 Use case test objectives by stage . 151 11.4 State transition conformance tests for PSAPs PE eCall . 152 11.4.1 General . 152 11.4.2 CTP 3.1.0.1 Provide MNOs with appropriate routing data PSAP PE eCall 154 11.4.3 CTP 3.1.0.2 Maintain map geo-information PSAP PE eCall 155
47、 11.4.4 CTP 3.1.1.1 Receive automatically initiated eCall PSAP PE eCall . 156 11.4.5 CTP 3.1.1.2 Receive manually initiated eCall PSAP PE eCall 157 11.4.6 CTP 3.1.2 Receive TS12 data- Caller ID when activated, to provide notification and relevant location information to the most appropriate Public S
48、afety Answering points (PSAP), by means of mobile wireless communications networks and carries a defined standardized minimum set of data, notifying that there has been an incident that requires response from the emergency services and establishes an audio channel between the occupants of the vehicle and the most appropriate PSAP. NOTE 1 EN 15722 specifies a standardized MSD for eCall, EN 16