1、Designation: D7197 06D7197 13Standard Table ofBody Measurements for Misses Maternity Sizes Two toTwenty-Two (2-22)1This standard is issued under the fixed designation D7197; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year
2、of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This standard table lists the body measurements of pregnant women from misses size two to twenty-two. Although thes
3、eare body measurements, they can be used in designing apparel for women in this size range when such factors as fabric type, easeof body movement, styling, and fit are taken into account.1.2 The values stated in either SI units or in inch-pound units shall be regarded separately as standard. The val
4、ues stated in eachsystem may not be exact equivalents; therefore, each system must be used independently of the other, without combining valuesin any way.2. Referenced Documents2.1 ASTM Standards:2D123 Terminology Relating to TextilesD5219 Terminology Relating to Body Dimensions for Apparel Sizing2.
5、2 ISO Standard:Size Designation of Clothes, Definitions and Body Measurements Procedures for Apparel Sizes33. Terminology3.1 Definitions:3.1.1 Refer to Terminologies D123 and D5219.4. Significance and Use4.1 The use of the body measurement information in Table 1 will assist manufacturers in the deve
6、lopment of patterns andgarments that are consistent with the current anthropometric characteristics of the population of interest. This practice in turnshould reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO Size Designationstandards.)5. Apparat
7、us5.1 All apparatus are calibrated for accuracy.5.2 Tape Measure, dimensionally stable and approximately 1.5 cm (12 in.) wide and graduated accurately in centimetres (116in.).5.3 Scale (Calibrated for Standard Body Weight).6. Procedures Used for Taking Measurements6.1 General Procedure:6.1.1 For all
8、 vertical and most horizontal measurements, subject is to be standing erect without shoes and with feetapproximately 15 cm (6 in.) apart.1 This table is under the jurisdiction of ASTM Committee D13 on Textiles and is the direct responsibility of Subcommittee D13.55 on Body Measurement for ApparelSiz
9、ing.Current edition approved Jan. 1, 2006Jan. 1, 2013. Published February 2006February 2013. Originally approved in 2006. Last previous edition approved in 2006 asD7197-06. DOI: 10.1520/D7197-06.10.1520/D7197-13.2 For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Cust
10、omer Service at serviceastm.org. For Annual Book of ASTM Standardsvolume information, refer to the standards Document Summary page on the ASTM website.3 Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036.This document is not an ASTM standard an
11、d is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Becauseit may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only
12、the current versionof the standard as published by ASTM is to be considered the official document.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1TABLE 1 New ASTM Maternity Measurement TableMISSES MATERNITY(SIZES 222)GIRTH MEASUREMENT
13、S (CENTIMETERS)SIZESVARIATIONFROMMISSES REG 2 4 6 8 10 12 14 16 18 20 22CHEST/BUST 7.62 86.90 91.44 93.98 96.52 98.06 102.87 106.68 110.48 115.57 120.65 125.23WAIST 22.86 83.82 88.36 89.90 91.44 93.98 97.79 101.60 105.41 110.49 115.57 120.85HIGH HIP (APPROX 4 IN. BELOW WAIST) 21.59 101.60 104.14 106
14、.65 109.22 111.78 116.57 119.36 125.19 128.27 133.35 138.43SEAT (HIP) 10.16 97.79 100.33 102.87 105.41 107.95 111.78 115.57 119.38 124.48 129.54 134.62MID-NECK 0.00 30.62 33.68 34.29 34.68 35.58 36.51 37.47 38.42 39.69 40.98 42.29NECK BASE 0.00 34.29 34.93 35.58 36.20 36.83 37.78 38.74 39.69 40.96 4
15、2.23 48.50ARMSCYE 1.91 38.10 39.85 40.01 40.96 41.91 43.80 45.09 46.87 48.56 50.48 51.12UPPER ARM 4.13 29.53 30.16 30.39 31.43 32.07 33.62 33.97 34.98 36.51 38.10 39.05ELBOW 1.91 25.72 28.04 26.36 26.67 26.99 27.52 28.28 29.09 29.85 30.80 31.12WRIST 0.00 14.61 14.92 15.24 15.56 15.98 16.19 16.51 16.
16、83 17.15 17.48 17.76THIGH-MAX 4.45 53.98 56.52 59.05 61.60 64.14 68.68 69.22 72.89 75.25 78.11 81.26THIGH-MIN 3.18 46.26 50.89 53.34 55.88 56.42 59.05 63.50 66.68 69.22 72.30 75.57KNEE 0.00 33.02 34.29 35.86 36.53 38.10 39.37 40.84 41.91 43.13 44.45 45.72CALF 0.95 31.75 33.02 34.29 35.58 36.83 38.10
17、 39.37 40.84 41.91 43.16 44.45ANKLE 0.64 21.91 22.54 23.59 23.81 24.45 25.08 25.72 26.35 26.99 27.62 28.26TRUNK (TOTAL TRUNK, TORSO) 12.70 157.48 161.29 165.10 168.91 170.13 176.53 180.34 184.15 187.09 191.77 195.58TOTAL CROTCH 11.43 78.11 80.01 81.92 83.52 85.73 87.88 89.54 91.44 93.35 95.25 97.16V
18、ERTICAL MEASUREMENTS (CENTIMETERS)SIZESVARIATIONFROMMISSES REG 2 4 6 8 10 12 14 16 18 20 22CERVICALE HEIGHT 0.00 136.43 138.70 140.97 142.24 143.51 144.78 146.06 147.32 148.59 149.80 151.13WAIST HEIGHT 2.54 102.24 102.87 103.51 104.14 104.78 105.41 106.05 106.88 107.22 107.95 108.59HIP HEIGHT 0.00 7
19、9.38 80.01 80.65 81.28 81.92 82.55 83.19 83.62 84.46 85.09 86.73CROTCH HEIGHT (INSEAM) 0.00 74.93 74.93 74.93 74.93 74.93 74.93 74.93 74.93 74.93 74.93 74.93KNEE HEIGHT 0.00 44.77 45.09 45.40 45.72 46.04 46.36 46.67 46.99 47.31 47.83 47.94ANKLE HEIGHT 0.00 6.99 6.99 6.99 6.99 6.99 6.99 6.99 6.99 6.9
20、9 6.99 6.99CENTER FRONT WAIST LENGTH 0.64 34.59 35.56 38.20 38.63 37.47 38.10 38.74 39.37 40.01 40.64 41.38CENTER BACK WAIST LENGTH 0.64 40.01 40.64 41.25 41.91 42.65 43.18 43.82 44.48 46.09 46.72 46.95TRUE RISE 0.00 24.77 25.40 26.04 26.87 27.31 27.94 28.56 29.21 29.55 30.48 31.12WIDTH garment size
21、s; maternity apparelASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement
22、 of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn.Your comments are invited either for revision of this standard or for
23、 additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known
24、to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).D7197 136
