1、MIL-M-b31qb 13 M 797990b 03Liqb50 T MIL-M-63146 (AR) 27 September 1977 MILITARY SPECIFICATION MINE, AT, PRACTICE M19, INERT AND FUZE, MTNE, AT, PRACTICE, M606, INERT PARTS FOR AND LOADING, ASSEMBLING AND PACKING This specification is approved foruse by the U.S. Army Armament Research and Development
2、 Command, and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 This specification covers the inspection of parts and loading, assembling, and packing for one type of mine desig- nated as Mine, Antitank, Practice M19, Inert with Fuze, Mine, AT, Practice,
3、 M606, Inert. 2. APPLICABLE DOCUMENTS 2.1 Issues of documents. -. The following documents of the issue in effect on date of invitation for bids, or request for proposals, form a part of this specification to the extent specified herein. . SPECIFICATIONS MILITARY MIL-A-48078 - anmiunition Standard Qu
4、ality Assur- ance Provisions, General Specizication For STANDARDS MILITARY MIL-STD-105 -. Sampling Procedures and Tables for MIL-STD-1168 - Lot Numbering of munition, MIL-STD-1169 - Rackaglng, Packing and Mcrrking for Inspection by Attributes Shipment for Inert Anmiunition Components. FSC: 1345 Bene
5、ficial commenta (recommendations, additions, deletions) and any pertinent data which may be of use in Improving this document should be addreeeed to: Commander, US Army Armament Research and Development Command, Attn. DRDAR-QA, Dover, New Jersey 07801 by using the self-addressed Standardization Docu
6、ment Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. ,- THIS DOCUMENT CONTAINS A PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-HIL-N-b3146 13 U 7777906 034q65L L U MIL-M-63146 (AR) DRAWINGS (see 6.5) U
7、.S. ARMY ARMAMENT RESEARCH AND DEWLOPIIIENT COMMAND 8830878 - 9321539 - 9321540 - 9321541 - 9321449 - 9321448 - Support, Packing, Ammo For Mine, AT, NM, M19 w/Fuze M606 Or Mine, Practice, M19, Inert Packing and Marking for Support, Packing, Ammunition for Mine, AT, Practice, M19, Inert BOX, Wireboun
8、d, Packing, Ammunition for Mine, AT, NM, M19 w/Fuze M606 or Mine Practice, M19, Inert Packing and Marking for Box, Wirebound, Pack- ing, Ammunition for Mine, AT, NM, Ml9 w/Fuze - M60.6 or Mine Practice, M19, Inert Mine, AT, Practice, M19, Inert Fuze, Mine, AT, Practice, M606, Inert, Assembly (Copies
9、 of specifications, standards, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the Contracting Officer.) 3 . KEQUIREME“ 3.1 Materials. - Materials and parts shall be in accord- ance wit
10、h applicable drawings and specifications. 3.1.1 Scrap. - Scrap formed in kettles, pails, risers, and loading machines used in the pouring and cooling operations, may be remelted and reused; however, the scrap shall not be contaminated in any way and shall comply with all requirements for the grade o
11、f filler specified except for form. Scrap from floor sweepings, ventilators, and suction apparatus shall. not be used. 3.2 Parts and assemblies. - The parts and assemblies shall comply with all requirements specified on the applicable drawings and with all requirements specified on .applicable speci
12、fications. 3.3 Workmanship. - All parts shall be fabricated and finished in a thorough, workmanlike manner. They shall be free of burrs, chips, sharp edges, cracks, unblended radii, sur- face defects, dirt, grease, rust, corrosion products, and other 2 Provided by IHSNot for ResaleNo reproduction or
13、 networking permitted without license from IHS-,-,-MIL-H-6319b 13 7777706 0344652 3 MIL-M-63146 (AR) foreign matter. The cleaninq method used shall not be in- jurious to any parts, nor shall the parts be contaminated by the cleaning agent. All required markings shall be neat and sharply defined. 4.
14、. QUALITY ASSURANCE PROVISIONS 4.1 assurance provisions. - Unless otherwi.se specified herein or in the contract, the provisions of MIL-A-48078 shall apply and are hereby made a part of this detail specification. 4.2 Classification of inspections. - The following type of inspection shall be conducte
15、d on this item. a. Quality Conformance Inspection 4.3 First article inspection. - None required. 4.4 Quality conformance inspection 4.4.1 Inspection lot formation. - Inspection lots shall 4.4.2 Examination. - (See MIL-A-48078). Unless other- comply with the lot formation provisions of MIL-A-48078. w
16、ise specified in the classification of defects and test tables; sampling plans for major and minor defects shall be in accor- dance with MIL-STD-105, Inspection Level II. Equipment nec- essary for the performance of the inspections listed shall be in accordance with 4.3.4. 3 . Provided by IHSNot for
17、 ResaleNo reproduction or networking permitted without license from IHS-,-,-I ! tn d -4 3 8 il x O I- a u MIL-M-b3L4b 13 m 777770b 0344b53 5 m dodooto mm0 WWO oorl *m. a al d a al d ti O rl rdl 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-a O 1
18、(v ;i -P w O - MIL-M-b3L4b 13 7777706 0344654 7 m Jm mm e. k 0, -a) cl o uk 5 n i , Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-E , fn 3.s MIL-M-63L46 13 9777706 0344655 7 b. . o. 00 o ou ou Orl a al d -il t-t-t a, a a, F: O 2 c, Ido rl *I 6 Prov
19、ided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-VI c 1 4 2 . -P w w w . - . Y?“.? w m mmm a al c 4 Q-l a“ 2 -_ al pral . orl tia -4 al rl Ftrl o .li 7 3 j C Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,
20、-$4 lua) rl Id1 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-8 rl ut i$ W a hl w w b . . - ki c I O i. P O I?) W o 2 hl“ mmm . m . m a, Q -.g k O O pr w o ai u a 3 -4 3. w 9 Ei rs: vi Q) o 4 3 F p: 2 E cz, Provided by IHSNot for ResaleNo reprodu
21、ction or networking permitted without license from IHS-,-,-I I ntni m mm m *. . otooto d9 O0 O ww O e. 00 ri LI $4 O O PI Q-t O al u W -rl 3 w 5 rl O (v I z Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-b314b 13 M 797790b 0344bb0 2 M MIL-1-9-
22、63146 (AR) 4.4;3 Testing. - None required. 4.4.4 Inspection equipment. - The inspection equipment required to perform the inspections and tests prescribed in this specification is identified in the Paragraph/Reference Inspection Nethod column in the tables starting with para- graph 4.3.2.1. The cont
23、ractor shall submit for approval, inspection equipment designs in accordance with the terms of the contract. See section 6 of MIL-A-48078 and section 6.3 herein . 5. PACKAGING 5.1 Preservation and Packaging. - 5.5.1 Level C. - Preservation and packaging shall be in accordance with Dwg. 8830878 and 9
24、321539. 5.2 Packing. - 5.2.1 Level C. - The inert mine shall be packed in accord- ance with Dwg. 9321540 and 9321541. 5.3 Marking. - Marking of the cartons shall be in accord- ance with Dwg. 9321539 and 9321541. 6. NOTES 6.1 Intended use. - The inert mine covered by this specification is intended fo
25、r demonstration purposes only. 6.2 Ordering data. - See MIL-A-48078 6.3 Submission of inspection equipment designs for approval. required to Commander, U.S. Army Armament Research and Dev- elopment Command, ATTN: DRDAR-QAA-I, Dover, N.J. 07801. 6.4 Distribution of Ammunition Data Cards. - Distri- bu
26、tion of data cards shall include the following: Commander, U.S. Army Armament Research and Development Command, ATTN: DRDAR-QAA-Q, Dover, New Jersey 07801. 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-N-63146 CIAR prepared By, and identifie
27、d as, Edgewood Arsenal, Frankford Arsenal, Rock rsland Arsenal or Picatinny Arsenal drawings. Technical data originally prepared by these activities is now under te cognizance of AWCOM. Custodian: Preparing Ac tivi ty : Amy-AR Project Number: 1345-A-189 U.S. GOVERNMENT PRINTING OFFICE - 703-122/1003 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
