1、A-A-58OLL = 9999974 OL217Lb 3T4 = I INCH-POUND I A-4-58011 30 JAN 93 COMMERCIAL ITEM DESCRIPTION CLEANER, ULTRASONIC, SIX GALLON The General Services Administration has authQrized the use of this Commercial Item Description. Abstract. This Commercial product descriptign covers a six gallon nominal c
2、apacity ultrasonic cleaner with a variable temperature heater suitable for branch mounting. Salient characteristics. 1. Dimensions. The cleaner shall have unobstructed internal dimensions not less than 12 inches long by 10 inches wide by 12 inches cleaning med depth. 2. Heater. The clearier shall be
3、 heated by a variable, thermostatically control 1 ed elect r i c heater. of um 3. Generator. The generator chassis may be either integral with the tank or a separate unit that is cable corinscted to the tank. It shall operate at a nominally rated frequency of not greater than 40 kHz. The true cleani
4、ng power output af the tank shall be less than lO Watts per gallon of cleaning medium. 4. MQUntltl9. The cleaner shall be suitable for either placement on a shop bench or mounted in an opening cut in a bench top. 5. Drain, The cleaner shall be fitted with a bottom drain. 6. Cover. The cleaner shall
5、be supplied with its customary lift-off cover, 7. Basket. The cleaner shall be supplied with its customary stainless steel parts basket. 8. Cleaning Medium. The ultrasonic cleaning medium shall be water with readily available appropriate cleaning agents added such as soaps, detergents, or wetting ag
6、ents. Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be sent to: ALC/TILDM, Kelly AFB, TX 78241-5900. The Resources and Lggiatics Services Division, SA- AMW N/A FSC 4940 DISTRIBUTION STATEMENT A. Appraved for publ
7、ic release, distribution Is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-58011 m 9999974 0121717 230 m A-A-508 1 1 9. Electric Dower. The cleaner shall be suitable for connection to a source of 120 volts 1 phase 50/60 hertz power. v
8、 10. Comoleteness. The cleaner shall be furnished complete with all items normally supplied to non-military customers. use after bench mounting, tank filling, connection to an electric power supply, and tank drain hook-up. The cleaner shall be ready for Contractor Certification. The contractor shall
9、 certify and maintain substant- iating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producers own drawings, specifications, standards and quality assurance practices. The government reserves the rights t
10、o require proof of such conformance prior to first delivery and thereafter as may be provided for under the provisions of the contract. Metric Products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured to inch/pound units, provided they fall wit
11、hin the tolerances specified in the inch/pound units. request should be made to the contracting officer to determine if the product is acceptable. rejecting the product. A The contracting officer has the option of accepting or If a product is manufactured to metric dimensions and those dimensions ex
12、ceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product. Reciulatory requirements. The offeror/contractor is encouraged to use re
13、covered materials in accordance with Public Law 94-580 to the maximum extent Doss i bl e. Preservation, packaging, packing, labeling, and marking. The preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order. Notes. Purchasers should include the followin
14、g information in procurement documents. a. Title, number, and date of the Commercial item description. CID based Dart number identification number. he following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor. A-A-58011-6 Ca
15、pacity of cleaner in gallons. CID Number. Designates a Commercial item description. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-SBOLL = 9999974 0323738 377 9 A-A-580 1 1 Known acceptable products. The following product(s) are known to have
16、previously met the requirements of this CID and need not resubmit bid samples or certification. Manufacturer Part number NSN Sonic Star International HT-5.6 4940-01-290-45 1 O Son i core TS-1647HC Not Assigned Krest Ultrasonics 4HT-1014-6 Not Assigned Baron Blakslee AC- 1 44 4940-01-043-3814 MILITARY INTEREST: Custodians: Air Force - 99 PREPARING ACTIVITY: Air Force - 82 (Project number 4940-F600) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
