1、 IEEE Std 980-2013 (Revision of IEEE Std 980-1994) IEEE Guide for Containment and Control of Oil Spills in Substations Sponsor Substations Committee of the IEEE Power and Energy Society Approved 10 December 2013 IEEE-SA Standards Board Abstract: The significance of oil-spillage regulations and their
2、 applicability to electric supply substations are discussed; the sources of oil spills are identified; typical designs and methods for dealing with oil containment and control of oil spills are discussed; and guidelines for preparation of a typical Spill Prevention Control and Countermeasures (SPCC)
3、 plan are provided. This guide excludes polychlorinated biphenyl (PCB) handling and disposal considerations. Keywords: collecting pit, IEEE 980, oil-containment methods, oil-containment system, oil discharge, oil spill, primary oil containment, retention pit, secondary oil containment, spill prevent
4、ion control and countermeasures (SPCC) plan The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 19 December 2013. Printed in the United Sta
5、tes of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE sta
6、ndards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE st
7、andard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or ren
8、dering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reason
9、able care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LI
10、MITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELI
11、ANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English ve
12、rsion published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its comm
13、ittees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individ
14、ual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards doc
15、uments. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence
16、 of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respo
17、nd to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA L
18、aws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or r
19、eferring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE und
20、er U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices
21、 and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy por
22、tions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photoco
23、py portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions
24、or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review
25、 at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have t
26、he latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the add
27、ress listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/e
28、rrata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with res
29、pect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.htm
30、l. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such
31、licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whet
32、her any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of in
33、fringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Participants At the time this IEEE guide was completed, the E2 Guide for Containment and Control of Oil Spills Working Group had the following membership: James S
34、osinski, Chair Matt Bauer, Vice Chair W. Bruce Dietzman David Harris Mike McNulty Harsh Naik Paason Rojanatavorn Roy Schrameck William Stone Diane Watkins Donald Wengerter The following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disappro
35、val, or abstention. William Ackerman Ali Al Awazi Steven Alexanderson Stan Arnot Peter Balma Thomas Barnes George Becker W.J. (Bill) Bergman Wallace Binder Michael Bio A. James Braun Chris Brooks Steven Brown William Byrd Thomas Callsen James Cole Ray Davis Gary Donner Michael Dood Frank Gerleve Dav
36、id Gilmer Jalal Gohari James Graham Randall C. Groves Charles Haahr David Harris Gary Heuston Robert Hoerauf James Houston R. Jackson John Kay Gael Kennedy James Kinney Jim Kulchisky Saumen Kundu Donald Laird Chung-Yiu Lam Thomas La Rose Albert Livshitz Debra Longtin Greg Luri Kaolyn Mannino William
37、 McBride Susan Mcnelly Daleep Mohla Jerry Murphy Paul Myers Michael Newman Joe Nims Robert Nowell Lorraine Padden Richard Paes Pathik Patel Christopher Petrola Thomas Proios Michael Roberts Anne-Ma Sahazizian Bartien Sayogo Devki Sharma Douglas Smith James Smith Jerry Smith James Sosinski John Spare
38、 Ralph Stell Gary Stoedter Paul Sullivan Michael Swearingen Joe Uchiyama John Vergis Jane Verner Donald Wengerter Kenneth White Roland Youngberg Copyright 2013 IEEE. All rights reserved. viCopyright 2013 IEEE. All rights reserved. viiWhen the IEEE-SA Standards Board approved this guide on 10 Decembe
39、r 2013, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Wael William Diab Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffman Pau
40、l Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary Robinson Jon Walter Rosdahl Adrian Stephens Peter Sutherland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE R
41、epresentative Michael Janezic, NIST Representative Don Messina IEEE Standards Program Manager, Document Development Erin Spiewak IEEE Standards Program Manager, Technical Program Development Introduction This introduction is not part of IEEE Std 980-2013, IEEE Guide for Containment and Control of Oi
42、l Spills in Substations. On December 31, 1973, the U.S. government published in its Code of Federal Regulations, under Title 40 Protection of Environment, the Federal requirements for the preparation and implementation of Spill Prevention Control and Countermeasure (SPCC) plans applicable to the dis
43、charge of oil at electrical facilities. While these regulations relate to oil spills into navigable waters, it should be realized that interpretation of navigable waters extends these regulations to cover many land-based areas. It is prudent, therefore, to recognize that there exists a potential for
44、 oil spills in almost every substation throughout the utility industry. It is consequently reasonable to identify the extent of the problem, if any, and to recommend plausible measures to control oil spills by means of an IEEE guide. This guide was revised by members of Working Group E2Guide for Con
45、tainment and Control of Oil Spills (IEEE Std 980)and is under the sponsorship of the Transmission and Distribution Substations Operations Subcommittee of the IEEE Power and Energy Society (PES) Substations Committee. Copyright 2013 IEEE. All rights reserved. viiiContents 1. Overview 1 1.1 Scope . 1
46、1.2 Purpose 1 2. Normative references 2 3. Definitions 2 4. Statutory requirements 3 4.1 U.S. federal 3 4.2 Other regulations . 5 5. Oil spill sources 5 5.1 Oil-filled equipment 5 5.2 Cables 5 5.3 Mobile equipment 5 5.4 Oil-handling equipment. 5 5.5 Oil storage tanks 6 5.6 Other sources . 6 6. Crite
47、ria 6 6.1 Probability of oil spills 7 6.2 Application determination . 8 6.3 Performance monitoring 8 7. Containment . 9 7.1 Containment systems. 10 7.2 Storm-water management and control. 19 7.3 Warning alarms and monitoring 28 7.4 Maintenance of oil-containment systems. 28 8. Control and response 2
48、9 8.1 Typical SPCC plan requirements. 29 8.2 Control and clean up in substations . 32 8.3 Disposal . 33 8.4 Maintenance of equipment 33 Annex A (informative) Typical information included in Notification Form and Spill Report. 34 Annex B (informative) Collecting pit volume calculation . 35 Annex C (i
49、nformative) Summary of IEEE 2012 survey.37 Annex D (informative) Bibliography 43 Copyright 2013 IEEE. All rights reserved. ixIEEE Guide for Containment and Control of Oil Spills in Substations IMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or networks. Implementers of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices an
