1、 IEC 61671-5 Edition 1.0 2016-04 INTERNATIONAL STANDARD Standard for automatic test markup language (ATML) test adapter description IEC61671-5:2016-04(en)IEEEStd 1671.5-2015 IEEE Std 1671.5 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEEE All rights reserved. IEEE is a registered trademar
2、k in the U.S. Patent 35.060 IEC ISBN 978-2-8322-3267-5IEEE ISBN 978-1-5044-0866-0 STD20902Warning! Make sure that you obtained this publication from an authorized distributor. IEEE Std 1671.5 Registered trademark of the International Electrotechnical Commission Contents 1. Overview 1 1.1 General 1 1
3、.2 Application of this documents annexes 2 1.3 Scope . 2 1.4 Application 2 1.5 Conventions used within this document 2 2. Normative references 3 3. Definitions, acronyms, and abbreviations 4 3.1 Definitions . 4 3.2 Acronyms and abbreviations . 5 4. TestAdapterDescription Schema 5 4.1 General 5 4.2 E
4、lements 6 4.3 Simple types 7 5. SchemaTestAdapterInstance.xsd 7 5.1 General 7 5.2 Elements 8 5.3 Simple types 9 6. ATML TestAdapterDescription XML schema names and locations 9 7. ATML XML schema extensibility 11 8. Conformance .11 8.1 Conformance of a TestAdapterDescription instance document 11 8.2
5、Conformance of a TestAdapterInstance instance document .12 Annex A (informative) IEEE download website material associated with this document 13 Annex B (informative) Users information and examples 14 B.1 Interface test adapter 14 Annex C (informative) Glossary .16 Annex D (informative) Bibliography
6、 17$QQH( LQIRUPDWLYH ,(/LVWRI3DUWLFLSDQWV,( any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEEE Standards documents ar
7、e developed within IEEE Societies and Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. IEEE develops its standards through a consensus development process, which brings together volunteers representing varied viewpoints and interests to achieve the final
8、 product. Volunteers are not necessarily members of IEEE and serve without compensation. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information con
9、tained in its standards. Use of IEEE Standards documents is wholly voluntary. IEEE documents are made available for use subject to important notices and legal disclaimers (see http:/standards.ieee.org/IPR/disclaimers.html for more information). IEC collaborates closely with IEEE in accordance with c
10、onditions determined by agreement between the two organizations. 2) The formal decisions of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Commi
11、ttees. The formal decisions of IEEE on technical matters, once consensus within IEEE Societies and Standards Coordinating Committees has been reached, is determined by a balanced ballot of materially interested parties who indicate interest in reviewing the proposed standard. Final approval of the I
12、EEE standards document is given by the IEEE Standards Association (IEEE-SA) Standards Board. 3) IEC/IEEE Publications have the form of recommendations for international use and are accepted by IEC National Committees/IEEE Societies in that sense. While all reasonable efforts are made to ensure that
13、the technical content of IEC/IEEE Publications is accurate, IEC or IEEE cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications (including
14、IEC/IEEE Publications) transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC/IEEE Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC and IEEE do not provide any attesta
15、tion of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC and IEEE are not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest e
16、dition of this publication. 7) No liability shall attach to IEC or IEEE or their directors, employees, servants or agents including individual experts and members of technical committees and IEC National Committees, or volunteers of IEEE Societies and the Standards Coordinating Committees of the IEE
17、E Standards Association (IEEE-SA) Standards Board, for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC/IEEE Publication or an
18、y other IEC or IEEE Publications. 8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that implementation of this IEC/IEEE Publicatio
19、n may require use of material covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. IEC or IEEE shall not be held responsible for identifying Essential Patent Claims for which a license
20、may be required, for conducting inquiries into the legal validity or scope of Patent Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of
21、this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. LLIEC 61671-5:2016 IEEE Std 1671.5-2015 Published by IEC under license from IEEE. 2015 IEEE. All rights reserved. Internatio
22、nal Standard IEC 61671-5/IEEE Std 1671.5-2015 has been processed through IEC technical committee 91: Electronics assembly technology, under the IEC/IEEE Dual Logo Agreement. The text of this standard is based on the following documents: IEEE Std FDIS Report on voting IEEE Std 1671.5-2015 91/1316/FDI
23、S 91/1340/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The IEC Technical Committee and IEEE Technical Committee have decided that the contents of this publication will remain unchanged until the stability date
24、 indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. LLLIEEE Standard for Automatic Test Markup Language (ATML) Test Adapter Description S
25、ponsor IEEE Standards Coordinating Committee 20 on Test and Diagnosis for Electronic Systems Approved 26 March 2015 IEEE-SA Standards Board ,( both of which accompany this standard. These XML schemas provide for the identification and definition of a test adapter. ATMLs XML schemas define the basic
26、information required within any test application and provide a vehicle for formally defining the test environment by defining a class hierarchy corresponding to these basic information entities and provide several methods within each to enable basic operations to be performed on these entities. ATML
27、 component standards within the ATML framework define the particular requirements within the test environment. ,( fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relati
28、ng to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods
29、and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its st
30、andards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her ow
31、n independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
32、 OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
33、 ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an
34、IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. ,( +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. ,( thus
35、they are provided strictly as information for users, implementers, and maintainers of this document. 1.3 Scope This standard defines an exchange format, utilizing XML, for both the static description of a test adapter by defining the interface between the UUT and the test station, and the specific d
36、escription of test adapter instance information. 1.4 Application This standard provides a clear definition of test adapter information that may be exchanged between conformant cooperating software components and applications. This standard provides a definition that accomplishes the following object
37、ives: a) Provide a means of describing the aspects of the test adapter, which is the interface between the test station and the UUT b) Provide a means of describing simple (e.g., cable only), passive, or active test adapters c) Provide a means of describing multiple or layered test adapters The info
38、rmation contained in XML documents conforming to this standard will be useful to: a) Test program set (TPS) developers b) TPS maintainers c) ATE system developers d) ATE system maintainers e) Developers of ATML-based tools and systems f) UUT developers and maintainers 1.5 Conventions used within thi
39、s document 1.5.1 General In accordance with the IEEE Standards Style Manual B3,3any schema examples will be shown in Courier font. In cases where instance document examples are necessary to depict the use of a schema type 3The numbers in brackets correspond to those of the bibliography in Annex D. ,
40、( explanatory information will be provided, along with examples, if additional clarification is needed. The explanatory information will include information on the intended use of the elements and/or attributes where the name of the entity does not clearly indicate its intended use. For elements der
41、ived from another source type (e.g., an abstract type), only attributes that extend the source type will be listed; details regarding the base type will be listed along with the base type. When referring to an attribute of an XML element, the convention of elementattribute will be used. In cases whe
42、re an attribute name is referred to with no associated element, the attribute name will be enclosed in single quotes. Element and type names will always be set in italics when appearing in text. This standard uses the vocabulary and definitions of relevant IEEE standards. In case of conflict of defi
43、nitions, except for those portions quoted from standards, the following precedence shall be observed: 1) Clause 3, and 2) The IEEE Standards Dictionary Online B2. 1.5.2 Precedence The TestAdapterDescription schema (TestAdapterDescription.xsd) element, child element, and annotation information shall
44、take precedence over the descriptive information contained in Clause 4. The TestAdapterDescription schema and the material contained in Clause 4 shall take precedence over the example information represented in Annex B. The TestAdapterInstance schema (TestAdapterInstance.xsd) element, child element,
45、 and annotation information shall take precedence over the descriptive information contained in Clause 5. The TestAdapterInstance schema and the material contained in Clause 5 shall take precedence over the example information represented in Annex B. 1.5.3 Word usage In accordance with the IEEE Stan
46、dards Style Manual B3, the word shall is used to indicate mandatory requirements strictly to be followed in order to conform to the standard and from which no deviation is permitted (shall equals is required to). The use of the word must is used only to describe unavoidable situations. The use of th
47、e word will is only used in statements of fact. The word should is used to indicate that among several possibilities one is recommended as particularly suitable, without mentioning or excluding others (should equals is recommended that). The word may is used to indicate a course of action permissibl
48、e within the limits of the standard (may equals is permitted to). The word can is used for statements of possibility and capability (can equals is able to). 2. Normative references The following referenced documents are indispensable for the application of this document (i.e., they must be understood and used, so each referenced document is cited in text and its relationship to this document is ,(&,(6WGexplained). For dated references, only the edition cited applies. For undated references, the
