欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    VA 23 51 00-2011 BREECHINGS CHIMNEYS AND STACKS.pdf

    • 资源ID:1074924       资源大小:37.55KB        全文页数:9页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    VA 23 51 00-2011 BREECHINGS CHIMNEYS AND STACKS.pdf

    1、05-11 23 51 00 - 1 SECTION 23 51 00 BREECHINGS, CHIMNEYS, AND STACKS SPEC WRITER NOTES: 1. Delete between /-/ if not applicable to project. Also delete any other item or paragraph not applicable in the section and renumber the paragraphs. 2. This section does not include free-standing chimneys. PART

    2、 1 GENERAL: 1.1 DESCRIPTION: This section specifies flue gas exhaust system and all accessories from the boiler outlet to the stack outlet to the atmosphere. Flue gas recirculation (FGR) ductwork (if required by burners furnished) is also specified. 1.2 RELATED WORK: A. Section 07 60 00, FLASHING an

    3、d SHEET METAL: Roof Penetrations. B. Section 13 05 41, SEISMIC RESTRAINT REQUIREMENTS FOR NON-STRUCTURAL COMPONENTS, C. Section 23 05 11, COMMON WORK RESULTS FOR HVAC and STEAM GENERATION. D. Section 23 05 51, NOISE and VIBRATION CONTROL FOR BOILER PLANT. E. Section 23 07 11, HVAC, PLUMBING, and BOI

    4、LER PLANT INSULATION. F. Section 23 08 00, COMMISSIONING OF HVAC SYSTEMS. Requirements for commissioning, systems readiness checklists, and training /G. Section 23 52 39, FIRE-TUBE BOILERS: Economizers/ /H. Section 23 52 33, WATER-TUBE BOILERS: Economizers/ /I. Section 23 09 11, INSTRUMENTATION and

    5、CONTROL FOR BOILER PLANT: Boiler Draft Control System./ 1.3 QUALITY ASSURANCE: A. Provide scale drawings showing nominal dimensions and weight of the systems. B. Boiler and burner manufacturer shall review complete system from boiler flue gas outlet to stack outlet to atmosphere and advise the Gover

    6、nment of any changes required to meet boiler and burner performance requirements. Note the altitude of plant site. C. If a double wall, factory-fabricated, positive pressure breeching and stack system is provided, the manufacturer shall completely engineer the entire system and provide all component

    7、s. Manufacturers representative shall provide installation instructions prior to start of construction, train the installers and certify in writing to the Resident Engineer Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-05-11 23 51 00 - 2 (RE) that

    8、the entire installation complies with the official standards of the manufacturer and with the project specifications. D. Flue gas recirculation ductwork shall be designed and provided by the burner manufacturer. E. Conform to NFPA 54 and NFPA 31 for installation of fuel burning equipment and applian

    9、ces. 1.4 SUBMITTALS: A. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, and SAMPLES. B. Design, materials, weights, construction, pressure and temperature limitations of breeching and stack systems, flue gas recirculation system. /Seismic design data. / C. Drawings showing a

    10、ll components, system arrangement and dimensions. D. Design, construction, allowable movements, movement forces, pressure and temperature limitations of expansion joints. E. Damper design, construction, pressure and temperature limitations, pressure loss at design flow, and leakage of closed damper.

    11、 F. Support designs, locations and loads for entire assembly. /Seismic design data. / G. Written statement from boiler/burner manufacturer that the design of the system is satisfactory to achieve the required boiler/burner performance. 1.5 APPLICABLE PUBLICATIONS: A. The publications listed below fo

    12、rm a part of this specification to the extent referenced. The publications are referenced in the text by the basic designation only. B. American Institute of Steel Construction (AISC): Steel Construction Manual, Thirteenth Edition C. ASTM International (ASTM): A36/A36M-08 Standard Specification for

    13、Carbon Structural Steel A242/A242M-04(2009) Standard Specification for High-Strength Low-Alloy Structural Steel A307-07b . Standard Specification for Carbon Steel Bolts and Studs, 60,000 psi Tensile Strength A563-07a . Standard Specification for Carbon and Alloy Steel Nuts A568/A568M-09a . Standard

    14、Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements For D. American Welding Society (AWS): Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-05-11 23 51 00 - 3 Dl.l/D1.1M-2010 Structura

    15、l Welding Code-Steel E. Manufacturers Standardization Society of the Valves and Fittings Industry (MSS): SP-58-2009 . Pipe Hangers and Supports Materials, Design, Manufacture, Selection, Application, and Installation F. National Fire Protection Association: NFPA 54-2006 . National Fuel Gas Code NFPA

    16、 31-2006 . Standard for the Installation of Oil-Burning Equipment PART 2 PRODUCTS: 2.1 BREECHING, STACKS, FGR DUCTWORK: SPEC WRITER NOTES: 1. Coordinate the breeching and stack design (diameter and height) with the draft requirements of the boiler/burner. The contract drawings must show breeching an

    17、d stacks in plan and sections and show diameters and heights. 2. The stack height must be sufficient to avoid flue gas being entrained into the boiler room make-up air or impinging on nearby buildings. 3. Where multiple boilers are connected to a common breeching and stack, the design should be base

    18、d on boilers operating at the required steam output to serve peak load conditions plus a standby boiler in the pre-purge cycle. In this situation, the media in the breeching and stack is a mixture of hot flue gas and relatively cool purge air. A. Refer to drawings for arrangement and dimensions, exc

    19、ept FGR ductwork shall be designed by the burner manufacturer. Connections to boilers and economizers must comply with the written recommendations of the boiler and economizer manufacturers. Ninety-degree tee sections are not permitted. Intersections must be made with lateral tees. SPEC WRITER NOTE:

    20、 Add wind-loading information. Edit out seismic requirements in non-seismic zones. B. Service: Design for continuous 315 C (600 F), 12 kPa (50 inches WC) positive and negative internal pressure, wind-loading for outside stacks _. /Design system and supports for seismic loads in accordance with Secti

    21、on 13 05 41, SEISMIC RESTRAINT REQUIREMENTS FOR NON-STRUCTURAL COMPONENTS./ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-05-11 23 51 00 - 4 SPEC WRITER NOTES: 1. Only UL-listed pre-engineered double- wall systems should be utilized in the building

    22、 beyond the perimeter of the boiler plant. 2. Select pre-engineered, pre-fabricated double-wall system (Par. C) or custom designed single wall system (Par. D) for the boiler plant. Design details for the custom-designed single wall system must be shown on the drawings. C. Pre-engineered, Pre-Fabrica

    23、ted, Double-Wall System: 1. Complete factory-built system, all components and installation engineered and provided by manufacturer of system. SPEC WRITER NOTE: Allow air space with no insulation on outside stack only if the stack gas cooling and consequent reduction in draft will allow specified bur

    24、ner performance. 2. Provide double wall metal stacks, tested to UL 103 UL 127 UL 641 and UL listed, for use with building heating equipment, in compliance with NFPA 211. 3. Corrosion-resistant steel, double-wall, circular cross section, positive pressure, blanket insulation between walls. /For stack

    25、 sections outside the building, air space with no insulation between walls is allowed./ 4. Factory-built standard sections, connected in the field with joining system designed and provided by system manufacturer. Designed to be pressure and vacuum-tight, no deformation, at the service conditions spe

    26、cified. 5. System manufacturers engineered support system, attached to structural members of the building, with expansion joints between rigid supports. Thermal expansion shall be handled by expansion joints and variable spring hangers. Thermal expansion and weight of system shall not impose loads i

    27、n excess of that allowed by manufacturer of boiler, economizer, or any other equipment, or exceed capabilities of building structure. Spring hangers shall conform to MSS SP-58, Type 51, variable spring. SPEC WRITER NOTE: Specify UL-listing and clearances to combustibles and non- combustibles only if

    28、 necessary because of the location of the stack or breeching. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-05-11 23 51 00 - 5 /6. UL-listed for _mm (_ inches) clearance to combustible materials and _mm (_ inches) clearance to non-combustible mater

    29、ials./ SPEC WRITER NOTE: Specify 304 stainless steel for natural gas and No. 2 oil burner fuels. Specify 316 stainless on heavy fuel oil (No. 4, 5, 6). 7. Inner Wall: Stainless steel, Type / 304 / 316 /, 0.9 mm (0.035-inch) minimum thickness for diameters 900 mm (36 inches) and smaller and 1.2 mm (0

    30、.048 inches) minimum thickness for diameters greater than 900 mm (36 inches) and 1200 mm (48 inches) and less. 8. Outer Wall: Aluminized or galvanized steel except / 304 / 316 / stainless steel outside of building, 0.6 mm (0.025 inch) minimum thickness for inner wall diameter 800 mm (32 inches) and

    31、less, 0.9 mm (0.034 inch) minimum thickness for inner wall diameter over 800 mm (32 inches) and 1200 mm (48 inches) and less. /9. Uninsulated Air Space between Inner and Outer Walls (Outside the Building Only): 25 mm (one inch) minimum. / 10. Insulation Between Walls: Fiberglass or mineral wool, 315

    32、 C (600 F). Minimum thickness 50 mm (2 inches). 11. Bands for Joining Sections: Same material as section being joined. Utilize sealant provided by system manufacturer. 12. Roof and wall penetrations shall be manufacturers standard ventilated thimble. Conform to Section 07 60 00, FLASHING and SHEET M

    33、ETAL. 13. Stack Outlet: Provide as shown, double cone rain cap or other type termination designed by manufacturer of the stack system. 14. Drain Section: Provide inside building below roof to drain rain water from stack. Extend drain pipe to floor drain. 15. Guys: Provide stack guy wires above roof,

    34、 with spring-loaded tensioners, in accordance with printed instructions of stack manufacturer. D. Custom-Designed, field-fabricated, steel single wall system: 1. Breeching and stack walls, carbon steel, ASTM A568, thickness 3.4 mm (0.1345 inch). 2. Fabricate in welded sections with angle termination

    35、s for bolted connection of sections. Shapes and plate shall be ASTM A36. 3. Welding shall comply with AWS Dl.l. 4. Comply with AISC Manual of Steel Construction, “Design, Fabrication, and Erection of Structural Steel.“ Design to be pressure and vacuum-tight, no deformation, at the service conditions

    36、 specified. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-05-11 23 51 00 - 6 5. Provide 3.2 mm (l/8 inch) thick high temperature, non-asbestos gaskets between sections. 6. Heavy hex ASTM A307 Grade B machine bolts. Heavy hex ASTM A563 Grade C nuts.

    37、 Provide washers under bolts and nuts. Bolts, nuts and washers cadmium plated. 7. Provide angle clips for attachment of insulation. 8. Roof penetrations shall conform to Section 07 60 00, FLASHING and SHEET METAL. 9. Rain cap shall be double cone arrangement, welded, supported by angles. 10. Support

    38、 with rigid and spring supports attached to the building structure. Supports shall be designed to completely support the system without overloading the connecting equipment or the building structure. Thermal expansion shall be accommodated by expansion joints and MSS SP-58, Type 51 variable spring h

    39、angers (if necessary). 11. Provide guy wires on stacks with spring-loaded tensioners as shown on the drawings. 12. Clean all surfaces of rust, mill scale, and apply prime coat of heat and corrosion resistant paint. Apply finish coats of heat and corrosion-resistant paint to all exposed uninsulated s

    40、urfaces. Select paint system compatible with maximum surface temperature. Refer to Section 09 91 00, PAINTING. SPEC WRITER NOTES: Provide outlet dampers and draft control system only on boilers that are connected to a common breeching and tall stack or chimney. 2.2 BOILER OUTLET DAMPERS AND ACCESSOR

    41、IES A. Type: Multi-blade, opposed horizontal blades, automatically controlled. Open-shut operation. Also, modulating operation on systems requiring automatic draft control. Locate at the outlets of the / boilers / economizers /. /Boiler outlet draft control is specified in Section 23 09 11, INSTRUME

    42、NTATION and CONTROL FOR BOILER PLANT./ B. Service: Design for 315 C (600 F), 1.2 kPa (5 inches W.C.) positive and negative pressure. Maximum leakage, when closed, shall be ten percent of maximum required flow. Maximum pressure loss at maximum boiler steam output, 0.01 kPa (0.05 inches WC). C. Constr

    43、uction: 1. Blades: ASTM A242 carbon steel, air foil, dowelled to shafts. 2. Shafts: Stainless steel. Provide seals at casing penetrations. 3. Bearings: External to flow stream, carbon, self-contained, bushing, packing-gland assemblies, self-lubricating. Provided by IHSNot for ResaleNo reproduction o

    44、r networking permitted without license from IHS-,-,-05-11 23 51 00 - 7 4. Linkages: Control arms dowelled to shafts. All control arms linked to drive motor. External to flow stream. All steel construction. D. Accessories: 1. Interlock Switch Mounting: Rigid mounting located to allow switch to sense

    45、damper linkage position. Switch is connected to burner control system specified in Section 23 09 11, INSTRUMENTATION and CONTROL FOR BOILER PLANT 2. Damper Drive Unit: Electric type that shall operate damper without overload. Provide 100 percent duty cycle maintenance-free motors that never overheat

    46、 or burnout under stalled conditions. Constant speed coordinated with the controlled process so that performance parameters remain within requirements. For systems without draft control, the drive unit shall automatically open damper 90 degrees on boiler purge and firing cycle; close damper on boile

    47、r shut down. For systems with draft control, the drive unit shall automatically open damper 90 degrees on boiler purge cycle, position damper as required for proper burner ignition, modulate damper during boiler firing to maintain constant outlet draft, close damper on boiler shut down. 2.3 EXPANSIO

    48、N JOINTS A. Provide sufficient types, quantities, and locations of expansion joints to completely absorb all thermal expansion of the system without imposing excessive loads on equipment or building structure. Fabric joints shall be used on single-wall stack and breeching system. On factory-fabricat

    49、ed double wall stack or breeching system, use slip-type, bellows-type, or fabric expansion joints engineered by designer of the stack and breeching system. B. Service: Design for 300 C (575 F), 5 kPa (20 inches) WC positive and negative internal pressure, continuous duty. C. Construction, Fabric Joints: 1. Fabric: High strength,


    注意事项

    本文(VA 23 51 00-2011 BREECHINGS CHIMNEYS AND STACKS.pdf)为本站会员(wealthynice100)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开