ETSI TS 136 106-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) FDD repeater radio transmission and reception (V13 0 0 3GPP TS 36 106 version 13 0 0 Release 13)《长期演进技术.pdf

《ETSI TS 136 106-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) FDD repeater radio transmission and reception (V13 0 0 3GPP TS 36 106 version 13 0 0 Release 13)《长期演进技术.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 136 106-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) FDD repeater radio transmission and reception (V13 0 0 3GPP TS 36 106 version 13 0 0 Release 13)《长期演进技术.pdf（55页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Evolved Universal TFDD repeater rad(3GPP TS 36.1TECHNICAL SPECIFICATION136 106 V13.0.0 (2016LTE; l Terrestrial Radio Access (E-radio transmission and recept.106 version 13.0.0 Release 1316-01) UTRA); ption 13) ETSI ETSI TS 136 106 V13.0.0 (2016-01)13GPP TS 36.106 version 13.0.0 Release 13R

2、eference RTS/TSGR-0436106vd00 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The

3、present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of

4、 ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware th

5、at the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/

6、portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be mo

7、dified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefi

8、t of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 106 V13.0.0 (2016-01)23GPP TS 36.106 version 13.0.0 Release 1

9、3Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Propert

10、y Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR search

11、es, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced

12、 by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference betwee

13、n GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 o

14、f the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 106 V13.0.0 (2016-01)33GPP TS 36.106 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword

15、. 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviations . 8g34 General . 8g34.1 Relationship between Minimum Requirements and Test Requirements 8g34.2 Regional requirements 9g35 Operati

16、ng bands and channel arrangement . 10g35.1 General . 10g35.2 Void 11g35.3 Void 11g35.4 Void 11g35.5 Operating bands 11g35.6 Channel bandwidth . 11g35.7 Channel arrangement 12g35.7.1 Channel spacing 12g35.7.2 Channel raster . 12g35.7.3 Carrier frequency and EARFCN . 12g36 Output power 13g36.1 Minimum

17、 requirement 14g37 Frequency stability . 14g37.1 Minimum requirement 14g38 Out of band gain . 14g38.1 Minimum requirement 14g39 Unwanted emissions . 16g39.1 Operating band unwanted emissions 16g39.1.1 Operating band unwanted emissions (Category A) 16g39.1.1.1 Minimum Requirements 16g39.1.2 Operating

18、 band unwanted emissions (Category B) . 18g39.1.2.1 Minimum Requirement . 18g39.1.2.1.1 Category B requirements (Option 1) . 18g39.1.2.1.2 Category B requirements (Option 2) . 21g39.1.3 Additional requirements . 22g39.1.4. Protection of the BS receiver in the operating band . 25g39.1.4.1 Minimum Req

19、uirement . 25g39.2 Spurious emissions . 26g39.2.1 Mandatory requirements . 26g39.2.1.1 Spurious emissions (Category A) 26g39.2.1.1.1 Minimum Requirement . 26g39.2.1.2 Spurious emissions (Category B) 27g39.2.1.2.1 Minimum Requirement . 27g39.2.2 Co-existence with other systems in the same geographica

20、l area 27g39.2.2.1 Minimum requirement 27g39.2.3 Co-location with base stations 33g3ETSI ETSI TS 136 106 V13.0.0 (2016-01)43GPP TS 36.106 version 13.0.0 Release 139.2.3.1 Minimum Requirements 34g310 Error Vector Magnitude . 39g310.1 Downlink Error Vector Magnitude. 39g310.1.1 Minimum requirement 39g

21、310.2 Uplink Error Vector Magnitude . 39g310.2.1 Minimum requirement 39g311 Input Intermodulation . 40g311.1 General requirement . 40g311.1.1 Minimum requirement 40g311.2 Co-location with BS in other systems 40g311.2.1 Minimum requirement 40g311.3 Co-existence with other systems 45g311.3.1 Minimum r

22、equirement 45g312 Output intermodulation 49g312.1 Minimum requirement 49g313 Adjacent Channel Rejection Ratio (ACRR) . 50g313.1 Definitions and applicability 50g313.1.1 Minimum Requirements . 50g313.2 Co-existence with UTRA . 50g313.2.1. Minimum Requirements . 50g3Annex A (normative): Environmental

23、requirements for the Repeater equipment 51g3Annex B (informative): Change history . 52g3History 54g3ETSI ETSI TS 136 106 V13.0.0 (2016-01)53GPP TS 36.106 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of

24、the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Vers

25、ion x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the th

26、ird digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 106 V13.0.0 (2016-01)63GPP TS 36.106 version 13.0.0 Release 131 Scope The present document establishes the minimum RF characteristics of E-UTRA FDD Repeater. 2 References The following docum

27、ents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - F

28、or a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Spe

29、cifications“. 2 ITU-R Recommendation SM.329, “Unwanted emissions in the spurious domain“. 3 ITU-R Recommendation M.1545: Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-2000. 4 3GPP TS 36.143: Evolved Universal Terrestrial

30、 Radio Access (E-UTRA); FDD Repeater conformance testing 5 3GPP TR 25.942: “RF system scenarios“. 6 3GPP TS.36.104: “E-UTRA Base Station (BS) radio transmission and reception“. 7 IEC 60721-3-3 (2002): “Classification of environmental conditions - Part 3: Classification of groups of environmental par

31、ameters and their severities - Section 3: Stationary use at weather protected locations“. 8 IEC 60721-3-4 (1995): “Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weather protected locat

32、ions“. 9 CEPT ECC Decision (13)03, “The harmonised use of the frequency band 1452-1492 MHz for Mobile/Fixed Communications Networks Supplemental Downlink (MFCN SDL)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in

33、 TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Carrier: The modulated waveform conveying the E-UTRA or UTRA physical channels Channel bandwidth: The RF bandwidth supporting a single E-UTRA RF

34、 carrier with the transmission bandwidth configured in the uplink or downlink of a cell. The channel bandwidth is measured in MHz and is used as a reference for transmitter and receiver RF requirements. Channel edge: The lowest and highest frequency of the E-UTRA carrier, separated by the channel ba

35、ndwidth. ETSI ETSI TS 136 106 V13.0.0 (2016-01)73GPP TS 36.106 version 13.0.0 Release 13Donor coupling loss: is the coupling loss between the repeater and the donor base station. Downlink: Signal path where base station transmits and mobile receives. Downlink operating band: The part of the operatin

36、g band designated for downlink. Maximum output power, Pmax: This is the mean power level per carrier measured at the antenna connector of the Repeater in specified reference condition. Operating band: A frequency range in which E-UTRA operates (paired or unpaired), that is defined with a specific se

37、t of technical requirements. NOTE1: The operating band(s) for an E-UTRA Repeater is declared by the manufacturer according to the designations in clause 5.5 table 5.5-1. NOTE2: Unless specified, operating band refers to the uplink operating band and downlink operating band. Output power, Pout: This

38、is the mean power of one carrier at maximum repeater gain delivered to a load with resistance equal to the nominal load impedance of the transmitter. Pass band: The frequency range in which the repeater operates in with operational configuration. This frequency range can correspond to one or several

39、 consecutive nominal channels. If they are not consecutive each subset of channels shall be considered as an individual pass band. A repeater can have one or several pass bands. Rated output power: Rated output power of the repeater is the mean power level per carrier that the manufacturer has decla

40、red to be available at the antenna connector. Repeater: A device that receives, amplifies and transmits the radiated or conducted RF carrier both in the downlink direction (from the base station to the mobile area) and in the uplink direction (from the mobile to the base station) In operating bands

41、with one exclusive link direction, only the dedicated link direction is repeated. In operating bands specified with only down-link or up-link, only the up-link or down-link as specified for the operating band is repeated. Transmission bandwidth: Bandwidth of an instantaneous transmission from a UE o

42、r BS, measured in Resource Block units. Transmission bandwidth configuration: The highest transmission bandwidth allowed for uplink or downlink in a given channel bandwidth, measured in Resource Block units. Uplink: Signal path where mobile transmits and base station receives. Uplink operating band:

43、 The part of the operating band designated for uplink. 3.2 Symbols For the purposes of the present document, the following symbols apply: BWChannelChannel bandwidth BWConfigTransmission bandwidth configuration, expressed in MHz, where BWConfig= NRBx 180 kHz in the uplink and BWConfig= 15 kHz + NRBx

44、180 kHz in the downlink. BWMeasMeasurement bandwidth BWSignalBandwidth of the repeater input signal filling the repeater pass band FDL_low The lowest frequency of the downlink operating band FDL_high The highest frequency of the downlink operating band FfilterFilter centre frequency FUL_low The lowe

45、st frequency of the uplink operating band FUL_high The highest frequency of the uplink operating band f_offset_PB Distance from the channel edge frequency of the first or last channel in the pass band NDLDownlink EARFCN NOffs-DLOffset used for calculating downlink EARFCN NOffs-ULOffset used for calc

46、ulating uplink EARFCN NRBTransmission bandwidth configuration, expressed in units of resource blocks NULUplink EARFCN ETSI ETSI TS 136 106 V13.0.0 (2016-01)83GPP TS 36.106 version 13.0.0 Release 13PEM,B32,ind Declared emission level in Band 32, ind=a, b, c, d, e PEM,NDeclared emission level for chan

47、nel N Pmax Maximum output power Pout Output power 3.3 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 2

48、1.905 1. ACRR Adjacent Channel Rejection Ratio BS Base Station DTT Digital Terrestrial Television EARFCN E-UTRA Absolute Radio Frequency Channel Number EIRP Effective Isotropic Radiated Power EVM Error Vector Magnitude IDFT Inverse Discrete Fourier Transform PB Pass Band TBD To Be Defined 4 General

49、4.1 Relationship between Minimum Requirements and Test Requirements The Minimum Requirements given in this specification make no allowance for measurement uncertainty. The test specification TS 36.143 4 Annex B defines Test Tolerances. These Test Tolerances are individually calculated for each test. The Test Tolerances are used to relax the Minimum Requirements in this specification to create Test Requirements. The measurement results returned by the Test System are compared - without any modification - against the Test Requirements as defined