1、*USACE / NAVFAC / AFCESA / NASA UFGS-01 35 40.00 20 (February 2010)-Preparing Activity: NAVFAC SupersedingUFGS-01 35 40.00 20 (July 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 01 - GENERAL REQUIREMENTSSECTION 0
2、1 35 40.00 20ENVIRONMENTAL MANAGEMENT02/10PART 1 GENERAL1.1 REFERENCES1.2 DEFINITIONS1.3 PRECONSTRUCTION MEETING1.4 SUBMITTALS1.5 CONTRACTORS ENVIRONMENTAL MANAGER1.5.1 Duties1.5.2 Qualifications1.6 ENVIRONMENTAL REGULATORY REQUIREMENTS1.7 ENVIRONMENTAL REQUIREMENTS FOR PRODUCTS1.7.1 Material Safety
3、 Data Sheets (MSDS)1.7.2 Life Cycle Assessments (LCAs)1.8 ENVIRONMENTAL PROTECTION PLAN1.9 ENVIRONMENTAL DEMONSTRATION AND TRAINING1.9.1 Instructor Qualifications1.9.2 Coordination1.9.3 Training Program1.9.3.1 Scheduling1.9.3.2 Training Modules1.9.3.3 EvaluationPART 2 PRODUCTS2.1 ENVIRONMENTALLY PRE
4、FERABLE PRODUCTS2.1.1 Prohibited Materials2.1.2 Packaging2.1.2.1 Industrial Paperboard2.1.2.2 Carrier Board2.1.2.3 Brown Papers2.1.3 SubstitutionsPART 3 EXECUTION3.1 PROTECTION OF NATURAL RESOURCESSECTION 01 35 40.00 20 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted witho
5、ut license from IHS-,-,-3.1.1 General Disturbance3.1.2 Water Resources3.1.3 Land Resources3.1.3.1 Erodible Soils3.1.3.2 Erosion and Sedimentation Control Devices3.1.3.3 Tree and Plant Protection3.1.4 Air Resources3.1.5 Fish and Wildlife Resources3.2 FIELD QUALITY CONTROL- End of Section Table of Con
6、tents -SECTION 01 35 40.00 20 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-01 35 40.00 20 (February 2010)-Preparing Activity: NAVFAC SupersedingUFGS-01 35 40.00 20 (July 2006) UNIFIED FACILITIES GUIDE SPE
7、CIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION 01 35 40.00 20ENVIRONMENTAL MANAGEMENT02/10*NOTE: This guide specification covers the responsibilities and requirements regarding environmental management.Edit this guide specification for project specific requirements by addi
8、ng, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be
9、 directed to the technical proponent of the specification. A listing of Technical Proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL1.1 REFERENCES*NOTE: Iss
10、ue (date) of references included in project specifications need not be more current than provided by the latest guide specification. Use of SpecsIntact automated reference checking is recommended for projects based on older guide specifications.*The publications listed below form a part of this spec
11、ification to the extent referenced. The publications are referred to within the text by the basic designation only.SECTION 01 35 40.00 20 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)ANSI Z400.1 (2
12、004) Hazardous Industrial Chemicals - Material Safety Data Sheets - PreparationASTM INTERNATIONAL (ASTM)ASTM D 4840 (1999; R 2004) Sampling Chain-Of-Custody ProceduresASTM D 5663 (1997; R 2003) Validating Recycled Content in Packaging Paper and PaperboardASTM E 1991 (2005) Environmental Life Cycle A
13、ssessment of Building Materials/ProductsASTM E 2114 (2008) Standard Terminology for Sustainability Relative to the Performance of BuildingsINTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)ISO 14040 (2006) Environmental Management - Life Cycle Assessment - Principles and FrameworkNATIONAL INSTITUT
14、E OF STANDARDS AND TECHNOLOGY (NIST)NIST BEES 4.0 (2007) Building for Environmental and Economic Sustainability Technical Manual and Users GuideU.S. DEPARTMENT OF AGRICULTURE (USDA)Biomass R R 2005) National Pollutant Discharge Elimination SystemU.S. GREEN BUILDING COUNCIL (USGBC)LEED (2002; R 2005)
15、 Leadership in Energy and Environmental Design(tm) Green Building Rating System for New Construction (LEED-NC)U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)40 CFR Protection of Environment40 CFR 261 Identification and Listing of Hazardous Waste1.2 DEFINITIONSDefinitions pertaining to susta
16、inable development are as defined in SECTION 01 35 40.00 20 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASTM E 2114 and as specified.a. “Biobased content“ is calculated as the weight of the biobased material divided by the total weight of t
17、he product, and is expressed as a percentage by weight.b. “Biobased materials“ include fuels, chemicals, building materials, or electric power or heat produced from biomass as defined by the Biomass R ecological balances are unfavorably altered; the utility of the environment for aesthetic, cultural
18、, or historical purposes degrades.1.3 PRECONSTRUCTION MEETINGAfter award of Contract and prior to commencement of the work, the Contractor shall schedule and conduct a meeting with the Contracting Officer to discuss the proposed Environmental Protection Plan and to develop a mutual understanding rel
19、ative to the details of environmental protection. The requirements for this meeting may be fulfilled during the coordination and mutual understanding meeting as specified in Section 01 45 00.00 10 01 45 00.00 20 01 45 00.00 40 QUALITY CONTROL.1.4 SUBMITTALS*NOTE: Submittals must be limited to those
20、necessary for adequate quality control. The importance of an item in the project should be one of the primary factors in determining if a submittal for the item should be required.A “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are already
21、marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only a29 a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army
22、projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or o
23、ther organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes SECTION 01 35 40.00 20 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-following the “G“ typically are not used for Na
24、vy projects.Submittal items not designated with a “G“ are considered as being for information only for Army projects and for Contractor Quality Control approval for Navy projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for C
25、ontractor Quality Control approval.for information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. The following shall be submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-01 Preconstruction Sub
26、mittalsEnvironmental Protection Plan; G; G, _Instructor QualificationsSubmit reference data to demonstrate instructors individual and firms capabilities and experience.SD-03 Product Data Life Cycle AssessmentsPackaging; (LEED)Submit documentation indicating percentage of post-industrial and post-con
27、sumer recycled content per unit of product. Indicate relative dollar value of recycled content products to total dollar value of products included in project.SD-06 Test ReportsField Quality Control ReportsSD-07 CertificatesEnvironmental Regulatory RequirementsFor Governments records, submit copies o
28、f permits, licenses, certifications, inspection reports, releases, jurisdictional settlements, notices, receipts for fee payments, judgments, correspondence, records, and similar documents, established for compliance with environmental regulations bearing on performance of the work.SD-08 Manufacture
29、rs Instructions Material Safety Data SheetsSD-11 Closeout SubmittalsTraining ProgramSECTION 01 35 40.00 20 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Submit two _ copies of instructional program outline for demonstration and training, incl
30、uding a schedule of dates, times, length of instruction, instructors names, learning objective, and teaching outline for each training module. At completion of training, submit one _ complete training manuals for Governments use, and a list of participants with each participants results of performan
31、ce-based test for each training module. For Governments records, submit Contractor 40 CFR employee training records upon request of the Contracting Officer.Protection of Natural Resources1.5 CONTRACTORS ENVIRONMENTAL MANAGERDesignate an on-site Environmental Manager responsible for overseeing the en
32、vironmental goals for the project and implementing procedures for environmental protection.1.5.1 DutiesThe Environmental Manager shall be responsible for the following:a. Compliance with applicable federal, state, and local environmental regulations, including maintaining required documentation.b. I
33、mplementation of the Waste Management Plan.c. Implementation of the Indoor Air Quality (IAQ) Management Plan.d. Implementation of the Environmental Protection Plan.e. Environmental training for Contractor personnel in accordance with their position requirements.f. Monitoring and documentation of env
34、ironmental procedures.1.5.2 QualificationsMinimum 5 years construction experience on projects of similar size and scope; minimum 2 years experience with environmental procedures similar to those of this project; familiarity with Environmental Management Systems (EMSs); familiarity with environmental
35、 regulations applicable to construction operations.1.6 ENVIRONMENTAL REGULATORY REQUIREMENTS*NOTE: The following is a list of resources to assist the Contractor with regulatory compliance.1. Storm water permitsRefer to The Office of Wastewater Management, NPDES Storm Water Program: http:/www.epa.gov
36、/npdes/stormwater2. Dredge and fill (Section 404) permitsRefer to U.S. EPA Office of Wetlands, Oceans, and Watersheds (OWOW): http:/www.epa.gov/owow/SECTION 01 35 40.00 20 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3. RCRA hazardous and no
37、n-hazardous solid waste requirementsRefer to EPAs Office of Solid Waste and Emergency Response: http:/www.epa.gov/epaoswer/osw/laws-reg.htm4. Oil spill requirements for construction activitiesRefer to EPA Oil Program web site: http:/www.epa.gov/oilspill/5. Hazardous substances (Superfund Liability)
38、requirements for construction activitiesRefer to EPAs Superfund website: http:/www.epa.gov/superfund/index.htm6. Polychlorinated Biphenyl (PCB) waste requirementsRefer to EPAs Polychlorinated Biphenyl (PCB) Homepage: http:/www.epa.gov/pcb/7. Air quality requirements for construction activitiesRefer
39、to EPAS Air Program Mobile Sources Page: http:/www.epa.gov/ebtpages/airmobilesources.html8. Asbestos requirements for construction activitiesRefer to EPAs Asbestos Management and Regulatory Requirements Website: http:/www.epa.gov/fedsite/cd/asbestos.html9. National Environmental Policy Act (NEPA) re
40、quirements for construction activities10. Endangered Species ActRefer to The US Fish and Wildlife Service Endangered Species Program: http:/endangered.fws.gov/11. National Historic Preservation Act12. State Office/Department of Environmental Quality13. Local Office/Department of Environmental Qualit
41、y14. The Construction Industry Compliance Assistance Center: an EPA-sponsored tool providing information on state and federal requirements; http:/www.cicacenter.org/index.cfm15. The National Environmental Compliance Assistance Clearinghouse: http:/cfpub.epa.gov/clearinghouse/16. The Associated Gener
42、al Contractors of America (AGC): provides tools to assist with compliance; http:/www.agc.org/*SECTION 01 35 40.00 20 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-The Contractor shall be responsible for knowing federal, state, and local regul
43、atory requirements pertaining to legal disposal of all construction and demolition waste materials. Comply with all applicable regulations and maintain records of permits, licenses, certificates, and other environmental regulatory requirement correspondences.1.7 ENVIRONMENTAL REQUIREMENTS FOR PRODUC
44、TS1.7.1 Material Safety Data Sheets (MSDS)*NOTE: The ANSI standard includes 16 sections. The first ten address the specific requirements under OSHA; the last six, listed below, identify information that OSHA does not require, but that may be useful for green buildings.*Submit an MSDS for each produc
45、t specified in other sections or required by OSHA to have an MSDS. MSDS shall be prepared no earlier than June 1998 within the previous five years _. Include information for MSDS Sections 1 through 16 in accordance with ANSI Z400.1 and as follows:a. Section 11: Include data used to determine the hazards cited in Section 3. Ide
