1、29 May 1968 SITPERSEDING MI -46948A( MU) Method of Inspection Visual Visual Visual Visual Manual Manual Manual Visual Visual Visual Visual Visual Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-LI67LIA 33 7777906 0334723 3 I MIL-T-46948A( MU) 4
2、.2.2.7 MINOR (Cont Defect Method of Inspection 203. Strapping missing, loose, broken or 204. Contents of box exposed Visual 205. Box damaged Visual 206. Marking missing, incorrect or illegible Visual 207. Number of units incorrect Visual 208. Car seal missing, unsealed or improperly positioned Visua
3、l improperly engaged Manual nd marking.- Level A - Packing and marking shall be in accord- ance idth Drawings C8800969 and 8800970. 5.2 Data cards.- Data card information shall be as specified in MIL-sTD-. Y - - 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license f
4、rom IHS-,-,-MI -46948 (MU) 6.1 A “mechanical failure“ is defined as any deformation or breakage of a part, the occurrence of which is other than a design function. for rejection when the thrusters are tested with no load on the body. 6.2 No load.- Permanent yielding of the body or tubes shall not be
5、 cause 6.3 - Load,- The expected performance of the thruster under conditions simu- lating those existing in aircraft is obtained when thrusters satisfactorily meet conditions of the load firing, 6.4 “Ignition delay“.- is defined as the time lapse between the firing of the cartridge and the beginning of the continuous pressure rise in the body of the thruster. Custodian: Preparing activity: Army - M Army - M Project No. 1377-A241 -,- - 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-