1、= MIL-STD-758C PA m 97779LL 0088692 5 m I NON-MEASUREMENT SENSITIVE I MIL-STD-758C( SH) 13 April 1990 SUPERSEDING 20 August 1979 MIL-STD-758B(SH) mARY STANDARD PACKAGING PROCEDURES FOR SUBMARINE SUPPORT ITEMS An DI dSC NIA AREA PACK STRIBUTION STATEMENT k Approved for public release; distribution is
2、 unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-758C(SH) FOREWORD 1. This Military Standard is-approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of
3、the Department of Defense. 2. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy, Washington, DC 20362-5101 by using the self-
4、 addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. 3. This standard establishes acceptable preservation methods, materials, containers, packing, marking, and processes for the packaging of submarine support (repair parts and sp
5、ares) items. 4. This standard also includes requirements for the following: a. Fire-retardant packaging materials b. Transparent and minimum/reduced cube unit protection c. Sensitive electronic item protection d. Exclusions e, Asbestos item protection f. g. Shipment markings h. Quality assurance pro
6、visions. Repair parts (nonrepairabIe/consumable) and spares (repairable) protection ii Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILSTD-758C( SH) CONTENTS PARAGRAPH PAGE 1 . 1.1 1.2 2 . 2.1 2.1.1 2.1.2 2.2 3 . 3.1 3.1.1 3.1.2 3.2 3.2.1 3.2.2 3.
7、3 4 4.1 4.2 4.3 4.4 4.4.1 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.11.1 4.12 4.12.1 4.12.2 4.12.3 4.13 SCOPE Scope . Exclusions REFERENCED DOCUMENTS Government documents . Specifications. standards. and handbooks . Other Government document and publications . Order of precedence . DEFTNITIONS Critical items
8、Critical chemically Critical physically . Support items . Repair parts Spar es . Packaging and provisioning definitions i GENERAL REQULREMENTS . Minimum cubehransparent unit packs . Repair parts Spares Oxygen and nitrogen systems . Electrolytic oxygen generators and systems Hazardous items 1 1 1 1 1
9、 1 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 Level I/SUBSAFE items . 5 TRIDENTitems . 6 Fleet ballistic missile weapons and strategic . weapons reparable items . 6 Sensitive electronic items 6 Asbestositems . 6 Preservatives 6 Talchalcum . 6 Navy fire-retardant materials . 6 Cushioning and wrapping material
10、 . 6 Lumber and plywood 7 Fiberboard 7 Packing 7 . r iii Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PARAGRAPH PAGE 4.14 Marking . 4.15 Classified material 4.16 Quality assurance provisions 5 . DETAILED REQUIREMENTS 5.1 Minimum cubehransparent pr
11、eservation methods for submarine Fepair . 5.2 Minimum reduced cubehransparent packaging for submarine spare . parts (consumable/nonrepairable)- not exceeding 40 pounds (repairable items) not exceeding 100 pounds 5.3 Method of preservation for sensitive electronic items 5.4 Marking . 6 . NOTES . 6.1
12、Intended use 6.2 Acquisition requirements 6.3 Subject term (key word) listing . ; 6.4 Changes from previous issue . FIGURES 1 . 2 . 3 . Example of reduced cubehransparent preservation methods Example of reduced cubehransparent preservation methods for submarine spares in accordance with MS 90363 Exa
13、mple of proper method of overpacking a depot/contractor for submarine repair parts spare item weighing 40 to 100 pounds . APPENDICES A Minimum cubehransparent preservation methods for submarine repair . parts (consumable4nonrepairable) not exceeding 40 pounds . B Minimum reduced cubehransparent pack
14、aging for submarine spares C Method of preservation for sensitive electronic items (repairable items) not exceeding 100 pounds . D Marking . iv 7 7 7 7 7 8 8 8 8 8 8 8 8 12 15 16 9 13 17 21 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-758C
15、 PA m 77777LL 0088696 2 m i. SCOPE 1.1 Scope. This standard establishes the procedures for the packaging of submarine support items at the time of acquisition or completion of repair which will assure maximum protection, minimum cube preservation, and transparent preservation, where appropriate, wit
16、hout the need for reprocessing. 1.2 Exclusions. Exclusions from the coverage of this standard are as follows: a. Support items for Naval nuclear propulsion plants b. Support and critical items requiring a specially designed reusable container or special method of preservation and packing in accordan
17、ce with a product or commodity specifica- tion, drawing, or packaging instruction c. Items requiring packaging which cannot be packaged in accordance with this standard, such as cables and electrodes. 2. APPLICABLE DOCUMENTS 2-1 Government documents. 2.1.1 Specications, standards, and handbooks. The
18、 following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these document are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto,
19、cited in the solicitation (see 6.2). SPECIFICATIONS FEDERAL A-A- 1894 Paper, Kraft, Treated (Fire Resistant) PPP-c-795 Cushioning Material, Packaging (flexible Cellular, Plastic Film) for Packaging Applications PPP-C-850 Cushioning Material, Polystyrene, Expanded, Resilient (for Packaging Uses) PPP-
20、(2-1120 Cushioning Material, Uncompressed Bound Fiber for Packaging PPP-C-1842 Cushioning Material, Plastic, Open Cell (for Packaging Applications) PPP -F-320 Fiberboard, Corrugated and Solid, Sheet Stock (Container Grade), and Cut Shapes uu-P-268 Paper, Kraft, Wrapping 1 Provided by IHSNot for Resa
21、leNo reproduction or networking permitted without license from IHS-,-,-MILITARY MIL-P-116 MIL-R-SOO1 MIL-R-6130 MIL-C-17435 MIL-I,-19140 MIL-P-19644 MIL-R-20092 MIL-P-26514 MIL-C-52211 MIL-F-81334 MIL-F-87090 STANDARDS MILITARY MIL-STD-794 MIGSTD-1330 MIL-STD-2073-1 - - MIL-STD-75C PA 7777733 008869
22、7 4 Preservation, Methods of Rubber Cellular Sheet, Molded and Hand Built Shapes; Latex Foam Rubber, Cellular, Chemically Blown Cushioning Material, Fibrous Glass Lumber and Plywood, Fire-Retardant Treated Plastic Molding Material (Polystyrene Foam, Expanded Bead) Rubber or Plastic Sheets and Assemb
23、led and Molded Shapes, Syntheti Foam or Sponge Open Cell Polyurethane Foam, Rigid or Flexible, for Packaging Components and Assemblies for Industrial Gas Production, Storage, and Transport Equipment, Packaging of Foam, Plastic, Flexible, Open Cell Polyester Type, Polyurethane Foam, Combustion Retard
24、ant, for Cushioning Supply Items Aboard Navy Ships Parks and Equipment, Procedures for Packaging of Cleaning and Testing of Shipboard Oxygen, Nitrogen and Hydrogen Gas Piping Systems DOD Material Procedures for Development and Application of Packaging Requirements (Unless otherwise indicated, copies
25、 of federal and military specifications, standards, and handbooks are available from the Naval Publications and Forms Center, (ATI”: NPODS), 5801 Tabor Avenue, Philadelphia, PA 19120-5099.) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-75
26、8C PA m 77797LL 0088678 6 m 2.1.2 Other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of .this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. DOC
27、UMENTS DEPARTMENT OF TRANSPORTATION Code of Federal Regulations, Title 49 (Application for copies should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.) INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA) Dangerous Goods Regulations (DGR) (Applicat
28、ion for copies should be addressed to: Publications Agent, International Air Transport Association, 2000 Peel Street, Montreal, Quebec Canada, H3A 2R4.) NOTE This tariff incorporates instructions contained in the International Civil Aviation Organization (ICAO). THE INTER-GOVERNMENTALMARITIME CONSUL
29、TATIVE ORGANIZATION (IMCO) Internationa1 Maritime Dangerous Goods Code (IMDGC) (Application for copies should be addressed to: International Maritime Organization, 101-104 Picadilly, London WIV OAE, England.) RECOMMENDATIONS ON THE TRANSPORT OF DANGEROUS GOODS (RTDG) (Application for copies should b
30、e addressed to the United Nations (UN), Sales Section, New York, Ny.) PUBLICATIONS NAVAL SUPPLY SYSTEMS COMMAND (NAVSUP) PUB 505 Packaging and Materials Handling; Preparation of Hazardous Materials for Military Air Shipments SHIPS PARTS CONTROL CENTER (SPCC) INST 4030.4 Packaging of Fieet Ballistic
31、Missile Weapons and Strategic Weapons Systems Reparable Items 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-INST 4030.10 Packaging, Packing and Marking of Level I/SUBSAFE (Submarine Safety Certification) Program Items INST 4030.14 Packaging, Pack
32、ing and Marking of TRIDENT Repairable and TRIDENT Planned Equipment Replacement Program (TRIPER) Items (Application for copies of SPCC Instructions should be addressed to Commanding Officer, Navy Ships Parts Control Center, Code 0741, Mechanicsburg, PA 17055-0788.) (Non-Government standards and othe
33、r publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.) 22 Order of precedence. In the event of a conflict between the text of this document and the referenc
34、es cited herein, the text of this document takes precedence with the exception of the publications listed in paragraph 3.5 herein. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. D-ONS. 3.1 Critical items. Items meeting
35、one or more of the following criteria are considered critical. 3.1.1 Critical chemically. Items which are of such a nature that any degree of deterioration (in the form of corrosion, stain, scale, mold, fungi, bacteria, etc.) caused by oxygen, moisture, sunlight, living organisms, temperature, time,
36、 and other contaminants, will result in premature failure or malfunction of the item or equipment in which installed or to which the item is interfaced. 3.1.2 Critical physically. Items of such a nature that a slight degree of physical action on the items or any integral surfaces there of renders th
37、em unfit for use. This includes items having a surface finish of 32 microinches root mean square or less, requiring a high degree of cleanliness and freedom from contamination as well as those requiring special protection against shock, vibration, abrasion, and distortion damage. 3.2 Support items.
38、Items subordinate to, or associated with, an end item e., spares, repair parts, tools, test equipment, support equipment, and sundry material) and required to operate, service, repair, or overhaul an end item. 3.21 Repair parts. Those support items that are coded (identified through provisioning) to
39、 be not repairable (Le. consumable items). 3.22 Spares. Those support items that are coded (identified through provisioning) to be repairable (Le. repairable items), also known as depot - level repairables. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I
40、HS-,-,-MIL-STD-758C PA = 7777733 0088700 O 3.3 Packaging and provisioning definitions. In addition to the definitions in 3.1 and 3.2, MIL-STD-2073-1 DOD Material Procedures for Development and Application of Packaging Requirements and MIL-STD-1561 Provisioning Procedures, Uniform DOD, expound on ter
41、min- ology used in the packaging and transportation fields. 4. GENERAL REQUIREMENTS. 4.1 Minimum cube/transparent unit packs. Processing in accordance with the requirements specified herein shall ensure maximum item protection with minimum cube (see appendix A, figure 1, and appendix B, figure 2) ut
42、ilization and transparency, where applicable. The appropriate method of preservation shall be selected from those contained in appendices A or B, and modified as specified to accomplish minimum cubehransparent unit packs. The final unit pack described by this standard shall be constructed in such a
43、manner that it can be placed in a bin, drawer, or other designated shipboard stowage location without modification. If further cube reduction for or within the shipboard stowage is necessary, repaired parts (consumables/nonrepairable) unit protected in accordance with appendix A may be removed from
44、the outer box (including cushioning) leaving the barrier bag or wrap intact. The barrier bag or wrap shall not be removed until the item is ready for use. Spares (repairables), unit protected in accordance with appendix B, shall not be removed from the unit pack until ready for use. 4.2 Repair parts
45、. Repair parts (consumables/nonrepairable) not exceeding 40 pounds shall be unit protected by the appropriate method specified in appendix A. Items exceediug 40 pounds shall be unit protected in accordance with MIL-P-116, using transparent materials specified therein, or the applicable method as det
46、ermined by the. contracting activity for item protection. Sensitive electronic items shall be as specified (see appendix C). 4.3 Spares. Spares (repairables) not exceeding 100 pounds shall be unit protected by the appropriate method specified in appendix B. Spares exceeding 100 pounds shall be unit
47、protected in accordance with MIL-P-116, using the transparent materials specified therein, or the applicable method as determined by the contracting activity for item protection. Sensitive electronic items, shall be as specified (see appendix C). 4.4 Oxygen and nitrogen systems. (Except Electrolytic
48、 Oxygen Generators - See 4.4.1). Unless otherwise specified, oxygen and nitrogen gas systems (equipment, repair parts, spares, and piping) shail be cleaned and packaged in accordance with MILSTD-1330. 4.4.1 Electroiytic oxygen generators and systems. Electrolytic oxygen generators, repair parts, and
49、 spares shall be cleaned; with the method of unit pack and level of exterior pack as specified in accordance with MIL-(2-52211. 4.5 Hazardous items. Hazardous materials shall be packaged in accordance with NAVSUP PUB 505, DOT 49 CFR, IATA DGR, IMCO IMDGC, and the UN RTDG. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-758C PA 7777733 0088
