1、i MIL-S-L7bD PA m 77777Ob 042530b b m IINCH-POUND 15 Julv 1988 SUPERSEDING 15 November 1977 (See 6.9) MIL-S-196D .: MIL-R-196C MILITARY SPECIFICATION SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF This specification is approved for use by all Departments and Agencies of the Departmen
2、t of Defense. 1. SCOPE 1.1 Scope. This specification covers the requirements for packaging (preservation, packing, and marking) of mechanical support items (see 6.4.2.12), spare and repair parts, accessories, and kits for systems and equipments such as, but not necessarily limited to: internal combu
3、stion engines (diesel, gas); turbines (gas, steam); machinery (winches, capstans, metal and wood working); pumps; compressors; and related mechanical or nonelectrical type equipment requiring maintenance and overhaul replacement items or assemblies. 1.2 Levels of protection. 1.2.1 Preservation. Leve
4、l A (see 3.9.1.1) Level B (see 3.9.1.2) Level C (see 3.9.1.3) Commercial (see 3.9.1.4) 1.2.2 Packing. Level A (see 3.9.2.2) Level B (see 3.9.2.3) Level C (see 3.9.2.4) Commercial (see 3.9.2.5) Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in i
5、mproving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy, Washington, DC 20362-5101 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A AREA
6、PACK DISTRIBUTION STATEMENT A Approved for public release; distribution unlimited -7- . obiaird From i 2 WBAL EHGIHEERIHG OOCULIEIITS S 2805 UcGm Av for Storage Batteries. - Primer Coacng, Synthetic, Rust-Inhibiting, Lacquer -Resisting. - Paper, Kraft, Wrapping. - Boxesl Folding, Paperboard. - Boxes
7、, Wood, Cleated, Veneer, Paper Overlaid. - Boxesr Wood, Wirebound. - Boxes, Shipping, Fiberboard, Wood-Cleated. - Boxes, Wood, Cleated-Plywood. - Boxes, Wood, Nailed and Lock-Corner. - Boxes, Shipping, Fiberboard. - Boxes, Fiberboard, Corrugated, Triple-Wall. - Boxes: Paperboard, Metal Edged and Com
8、ponents. - Boxes, Setup. - Barrier Material, Waterproofed, Flexible. - Boxes, Shipping, Reusable with Cushioning. - Cans, Metal, 28 Gage and Lighter. - Cushioning Material, Packaging (Flexible Cellular, Plastic Film) or Packaging Applications. - Cushioning Material, Cellulosic. - Cushioning Material
9、, Polystyrene, Expanded, Resilient: (For Packaging Uses). - Cushioning Material, Uneompressed Bound Fiber for Packaging. - Cushioning Material, Packaging, (Unicellular Polyethylene Foam, Flexible). - Cushioning Material, Resilient, tow Density, Unicellular, Polypropylene Foam. - Cushioning Material,
10、 Plastic, Open Cell (For Packaging Applications). - Fiberboard; Corrugated and Solid, Sheet Stock (Container Grade), and Cut Shapes. 1 Hardware (Fasteners and Related Items), Packaging of. - Preservation and Packing of Hand Tools; Tools and Tool Accessories or Power Driven, Metal and Woodworking Mac
11、hinery. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Y c MIL-S-LShD PA m 7797706 0425308 T m MIL-S-196D E FEDERAL (Continued) PPP-P- 291 PPP - T - 60 MILITARY MIL-V - 3 MIL-P-116 MIL-B-121 MIL-B- 197 MIL-B- 233 MIL-P-775 MIL-B-3106 MIL-(2-3955 M
12、IL-P-4861 MIL-R-5001 MIL-C-5501 MIL-D-6055 MIL-R-6130 MIL- I - 8574 MIL-E-10062 MIL-C-12000 MIL-V-13811 MIL-E-16298 MIL-P-16789 MIL-P-17286 MIL-E-17555 MIL-L-19140 MIL-P-19644 MIL-R-20092 MIL-B-22019 MIL-B-22020 MIL-B-22191 Paperboard, Wrapping and Cushioning. Tape: Packaging, Waterproof. Valves, Fi
13、ttings, and Flanges (Except for Systems Preservation, Methods of. Barrier Material, Greaseproofed, Waterproofed, Flexible. Bearings, Antifriction; Associated Parts and Subassemblies; Preparation for Delivery of. Boxes, Supply Support Items, Stowage and Storage. Packaging of Hose, Hose Assemblies; Ru
14、bber, Indicated Herein); Packaging of. Plastic, Fabric, or Metal (Including Tubing); and Fittings, Nozzles, and Strainers. Board, Composition, Water-Resistant, Solid (For Filler and Cushioning Pads). Cans, Composite, Spirally Wound. Packing, Preformed, Rubber, Packaging of. Rubber Cellular Sheet, Mo
15、lded and Hand Built Caps and Plugs, Protective, Dust and Moisture Drums, Metal Reusable, Shipping and Storage (Cap. Rubber, Cellular, Chemically Blown. Inhibitors, Corrosion, Volatile, Utilization of. Engines: Preparation for Shipment and Storage Cable, Cord, and Wire, Electric; Packaging of. Varnis
16、h, Waterproofing, Electrical, Ignition. Electric Machines Having Rotating Parts and Associated Repair Parts: Packaging of. Pumps (Including Prime Movers and Support: Items); Packaging of. Propulsion and Auxiliary Steam Turbines and Gears (Including Repair Parts, Tools, Accessories and Instruments):
17、Packaging of. Electronic and Electrical Equipment, Accessories, and Provisioned Items (Repair Parts): Packaging of. Shapes; Latex Foam. Seal General Specification for. From 88 to 510 Cubic Inches). of. Lumber and Plywood, Fire-Retardant Treated. Plastic Molding Material (Polystyrene Foam, Rubber or
18、Plastic Sheets and Assembled and Molded Barrier Materials, Transparent, Flexible, Bags, Transparent, Flexible, Sealable, Volatile Barrier Materials, Transparent, Flexible, Heat- Expanded Bead). Shapes, Synthetic, Foam or Sponge, Open Cell. Sealable, Volatile Corrosion Inhibitor Treated. Corrosion In
19、hibitor Treated. Sealable. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- flIL-S-Ii7bD PA m 99497tlb 0425309 Ir MIL-S-196D MILITARY (Contnued) MIL-A-25175 MIL-P-26514 MIL-Co26861 MIL-T-45542 MIL-C-55442 M1L.F-81334 MIL-P-87090 S TANDAD S FEDERAL
20、PED-STD-313 MILITARY MIL-STD-129 MIL-STD-147 MIL-STD-758 MIL-STD-1186 MIL-STD-1367 - Air Transport, Nontactical, Packing for. - Polyurethane Foam, Rigid or Flexible, for - Cushioning Material, Resilient Type, General. - Tool Sets, Shop Sets and Kits Maintenance, - Cable Assemblies and Cord Assemblie
21、s, Packaging - Foam, Plastic, Flexible, Open Cell Polyester - Foam, Combustion Retardant, for Cushioning Supply Packaging. Modification and Tool Packaging of. of Type, Polyurethane. Items Aboard Navy Ships. - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnish
22、ed to Government Activities. - Marking for Shipment and Storage. - Palletized Unit Loads. - Packaging Procedures or Submarine Repair Parts. - Cushioning, Anchoring, Bracing, Blocking and Waterproofing; with Appropriate Test Methods. - Packaging, Handling, Storage, and Transport- ability Program Requ
23、irements (For Systems and Equipments). MIL-STD-2073-1 - DoD Materiel Procedures For Development and Application of Packaging Requirements. 2.1.2 Other Government publicatioq. The following other Government publication forms Q part of this specification to the extent specified herein. Unless otherwis
24、e specified, the issues shall be those in effect on the date of ch0 sslicitatAsn. CODE OF FEDERAL REGULATIONS (CFR) 29 CFR 1910,1200 - Hazard Communication Standard. (AppliC!atiOn for copies should be addressed to the Superintendent of (Copies of specificaeions, standards, and publications required
25、by Documents, WS Government Printing Off ice, Washington, DC 20402. ) contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting actvity.) 2.2 Other mblications. The following documents form a part of this specific
26、ation to the extent: specified herein. Unless otherwise specified, the issuas sf the documents which are DoD adopted shall be those listed in the issue of the DoBISS specified in the solicitation. issues of docwnencs not: listed in the DoDISS shall be the issue of the nongovermant documents which is
27、 current: on the date o the solicitation. Unless otherwise specified, the 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-LShD PA 9799906 0425310 B MIL- S - 196D c AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D 996 - Standard Terminology
28、 of Packaging and Distribution D 3951 - Standard Practice for Commercial Packaging. Environments. (DoD adopted) (DoD adopted) (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) (Nongovernment standards and other p
29、ublications are normally available from the organizations which prepare or which distribute the documents. These documents also may be available in or through libraries or other informational services.) 2.3 Order of precedence. When an equipment or item is acquired in conform- ance with a commodity
30、specification, having detailed packaging or preparation for delivery requirements which differ from this specification, the packaging or preparation for delivery specified in the commodity specification shall apply. 3. REQUIREMENTS 3.1 Definitions or exDlanation of packaging terms. Definitions or ex
31、plana- tion of packaging terms applicable to this specification shall be as stated in the applicable referenced specification and as specified in 6.4. For definitions or explanation of packaging terms not specified therein, MIL-P-116 and ASTM D 996 shall apply. 3.2 First article. When specified in t
32、he contract or purchase order, a sample shall be subjected to first article inspection (see 4.4 and 6.3). 3.2.1 Dummv or simulated load. When specified (see 6.2.1), a dummy or When a simulated load may be used for the rough handling tests (see 4.4.2). dummy or simulated load is substituted for the a
33、ctual equipment or item in performing the rough handling tests, instrumentation of the pack is required for assurance that the acceleration of the packed item during the tests is less than the fragility rating of the item. If this alternative load is used, the contractor shall prepare a notification
34、 of tests (see 6.2.2). 3.3 Materials. Packaging materials shall be as specified herein and in the applicable referenced specifications. 3.3.1 Recovered materials. Unless otherwise specified herein, all equip- ment, material, and articles incorporated in the products covered by this specification sha
35、ll be new and may be fabricated using materials produced from recovered materials to the maximum extent practicable without jeopardizing the intended use. The term “recovered materials“ means materials which have been collected or recovered from solid waste and reprocessed to become a source of raw
36、materials, as opposed to virgin raw materials. Unless otherwise specifically specified, none of the above shall be interpreted to mean that the use of used or rebuilt products is allowed under this specification. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license
37、from IHS-,-,-MIL-S-LSbD PA 944790b OY25313i T MIL-S-196D 3.3.2 pew materials. The use of newly developed packaging materials or procedures are encouraged and recommended and will be permitted under the conditions specified herein, provided they are equal to or better than the opacified materials or
38、procedures and there is no additional cost to the Government. 3.3.2.1 Ce-tification of new materials. If the contractor desires to use matarinle or procedures other than those speciied herein, he shall urnish a certificate QL compliance (see 6.2.2). If, after a review of the material or procedure an
39、d the related documented evidence, or the witnessing of the stipu- lated tats, it is the opinion of the contracting activity that the material or procedure meets or exceeds the requirements specified herein, interim authori- zation for use niIl be granted until preparation o a new specification or r
40、evision of an exiscing specification, 3.3.3 acreos. 3.3.3.1 Packwing materials. Asbestos or material and items containing asbestos shall be excluded from use in the packaging of macerial or items covered by this specification (see 6.5)- 3.3.3.2 Packaced items. Asbestos, and separately packaged compo
41、nents containing asbestos that is predominately distributed throughout the item, shall be paekagad in sealed, dust-proof and sift-proof packages. Flexible packages shnl be heat: sealed. All packages shall be marked (see 3.9.3). 3.3.3.3 Dusting material. Dusting material such as talcum shall be When
42、specified in the contract or order, a certificate of asbestos-free. compliance shall be prepared (see 6.2.2). 3.3.4 CushioninP: and wrappng materials. The use of excelsior, newspaper, shredded paper (all types) and similar hygroscopic or nonneutral materials and all typos of loose fill material (for
43、 applications such as cushioning, fill, stuffing, and dunnage) shall be prohibited. Materials selected for cushioning and wrapping shall have properties (characteristics) resistant to ire (see 3.9.1.1.1). 3.4 Technical dacq. Complete descripcive packaging details on drawings, test results, and packa
44、ging and transportation data requirements are not required when such were previously submitted and accepted by the contracting activity. 3.4,1 J)rawnns, When specified in the contract: or order, drawings or special packaging instructions shall be prepared (see 6.2.2). 3.4.2 preservation and packing
45、data. When specified in the contract or order, preaarvacion and packing data shall be prepared (see 6.2.2). 3.4.3 Packnginn. handling. storage and transDortabi1i.q plan (PHST) When apacified in the contracc or order, a PHST shall be prepared (see 6.2.2). plan, when required, shall be tailored for th
46、e applicable system or equipment acquisition in accordance with the requirements of MIL-STD-1367. The 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-LSbD PA m 777770b 0425332 L m MIL-S-196D 3.4.4 Material safety data sheet (MSDS). The contra
47、cting activity shall be provided a material safety data sheet (MSDS) at the time of contract award. The MSDS shall be provided in accordance with the requirements of FED-STD-313 and 29 CFR 1910.1200. When FED-STD-313 is at variance with the CFR, 29 CFR 1910.1200 shall take precedence, modify and sup
48、plement FED-STD-313. The MSDS shall be included with each shipment of the material covered by this specification (see 6.7). 3.5 Lubrication. Rotating joints, bearings, and similar moving items and assembled units requiring lubrication for service use shall be lubricated. The lubricant shall be as sp
49、ecified in the equipmnet specification or as approved by the contracting activity. Excess lubricants shall be removed prior to packing . operations, 3.6 Unit pack quantity. Unless otherwise specified (see 6.2.1), material shall be unit protected one for each unit pack except that all parts comprising a single set or assembly shall be individually unit protected within a unit pack. When unit protected as a set, assembly, or quantity greater than one, each item shall be wra
