1、NOTE:The documentidentifierand heading has beenchangedon MIL-PRF-11393Dthis page to reflect that this is a performance specification. There AMENDMENT 1we no other changes to this document. The document identifier on 12 hfy 1987subsequent pages has not been chan but will be changed thenext time this
2、document is revised. PERFORMANCE SPECIFICATIONTEST SET, CONTINUITY,IGNITER CIRCUITThis amendmentformsapart of MIL-T-11393,dated3 June 1974,and is approved for uscby nil Departments and Agencies of the Deptutment of Defense.Paga 1Delete paragraph 2. and replace with the following:2.1 Government docum
3、ents.2.1.1 “ The following speeifkations, standrrds, and handbookform a part of this specification to the estent specified herein. Unless otlmvise specified, the issues of thesedocuments shall be those listed in the issue of the Department of DefenseIndexof Specifications andStandards (DODISS) and s
4、upplement thereto, sited in the solicitation.Add the following to the bottom of pnge I:Beneficial comments (reeommd ations, additions, deletions) and any petiinent datawhich may be of use in improving this document should be addressed to:CommandingOffker, NavalOrdnanceStation,TStmdmdization/Document
5、ationDivision (524) Indian Head, MD 20640-5000 by using the self-addressedStandardization Document Improvement Proposal (DD Form i426) appearing theend of this document or by letter.Page 2Add the following under “STANDARDS”:“FederalFED-STD-H28 Screw Thread Stzmdnrds for Federal Services”Change the f
6、ollowing under “Military”:“MlL-STD-l80”to“MIL-STD-810”Add the followingunder“StnndmdMilitary”:MIL-STD-83 Test Repoti, Preparation ofAMSCN4116 FSC 4925DISTRIBU”HON STATEMENT A. Approved for public rclcisc; chstribuion is unllmitecl.Source: http:/assist.daps.dla.mil - Downloaded: 2005-06-22T21:42ZChec
7、k the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-l1393DAMENDMENT 1Page 3Delete paragraph 2.2 and replace with the following:“2.2 Other publications. The following documents form
8、a part of thisspecification to the extent specified herein. Unless otherwise specified, theissue of the DODXSS specified in the solicitation. Unless otherwisespecified, the issues of documents not listed in the DODiSS shall be the issueof the nongovernment documents which is current on the date of t
9、hesolicitation.”Delete under paragraph 2.2 the following:Handbook li28 Scre Thread Standards for Federal Services”Delete “Technical society and technical association specifications . . .groups and using federal agencies.”Add the following:“(Nongovernment standards and other publications are normally
10、 available fromthe organizations which prepare or which distribute the documents. Thesedocuments also may be available in or through libraries or other informational services.)”Add new paragraph 2.3 as follows:“2.3 Order of precedence. In the event of a conflict between the text ofthis specification
11、 and the references cited herein (except for associateddetail specifications, specification sheets or MS standards), the text of thisspecificat.on shall take precedence. Nothing in this specification, however,shall supersede applicable laws and regulations unless a specific exemptionhas been obtaine
12、d.”Page 4Paragraph 3.3.3 change “Handbook H28 to Federal Standard ti28Page 9Delete pdragraph 4.1 and replace with the following:“4.1 Responsibility for inspection. Unless otherwise specified in thecontract or purchase order, the contractor is responsible for the performanceof all insDect.ion require
13、ments as secified herein. Except as otherwisespecified n the contract or purchaseany other facilities suitable for theorder. the contractor may use his own orperformance of the inspection2Source: http:/assist.daps.dla.mil - Downloaded: 2005-06-22T21:42ZCheck the source to verify that this is the cur
14、rent version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PIIL-T-1I393DAMEIUIMENT 1requirements specjfied herein, unless disapproved by the Government. TheGovernment reserves the right to perform any of the inspections set forth inthe s
15、pecification where such inspections are deemed necessary to assuresupplles and services conform to prescribed requirements.4.1.1 Responsibility for compliance. All items must meet all requirementsof sections 3 and 5. The inspection set forth in this specification shallbecome a part of the contractor
16、s overall inspection systems or qualityprogram. The absence of any inspection requirements in the specificationproducts or supplies submitted to the Government for acceptance comply withall requirements of the contract. Sampling in quality conformance does notauthorize submission of known defective
17、material, either indicated or actual,nor does it ccmnit the Government to acceptance of defective material.”Page 13Add the following new paragraph:“4.4.9 Test reports. When specif+ed in the contract or order, the suppliershall pk”epare d E!St report in accordance with MJL-ST9-831 (see 6.2.2).”Page 1
18、3/14Paragraph 5.2: Add item “( ) Number of Test Set to be furnished.”Page 14Paragraph 5.2.2: Chiinge to read as follows:“6.2.2 Data requirements. Uhen this specification Is used in anacqu!sitio=nd data are required to be delivered, the data requirementsidentified below shall be developed as specifie
19、d by an approved Data ItemDescriFtlon (DD Form 1664) and delivered in accordance with the approvedContract Data Requirements List (CDF?LJ, incorporated into the contract. Whenthe provisions of DoD FAR Supplement, Part 27, Sub-Part 27.410-6 (DD Form1426) are invoked and the DOD Form 1423 is not used,
20、 the data specified belowshall be dellvered by the contractor in accordance with the contract orpurchase order requirements. Deliverable data required by this specificationare cited ill the following paragraphs.3Source: http:/assist.daps.dla.mil - Downloaded: 2005-06-22T21:42ZCheck the source to ver
21、ify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-11393DAHENDPIENT 1-Paraqraph no. Data requirement tftle Applicable DID no.4.2.1 Report, Ffrst Artfcle DI-7-4902Inspection4.3.1 Certification of Comp
22、liance DI-E-21214.4.9 Test Report DI-T-2072(Data item descriptions, related to thfs specfficatfon, and identifiedin thfs sectfon will be approved and listed as such in DOD 501O.12-L ANSDL.Copies of data item descriptions required by the contractors in connectionwith specific acquisition functions sh
23、ould be obtained from the NavalPublications and Forms Center or as directed by the contracting officer.)Custodian: Preparfng actfvfty:Air Force - 70 Navy - OSProject No. 4925-0045Revfew activities:Army - MI, SMAfr Force - 70User activities:Navy - AS, MC4Source: http:/assist.daps.dla.mil - Downloaded: 2005-06-22T21:42ZCheck the source to verify that this is the current version before use.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
