1、AMSC N/A FSC 5935 INCH-POUND MIL-DTL-24231/4E(SH) 26 April 2013 SUPERSEDING MIL-C-24231/4D(SH) 15 May 1987 DETAIL SPECIFICATION SHEET CONNECTOR, PLUG, TYPE I, MOLDED, 14-, 24-, 30-, OR 40-CONDUCTOR (STRAIGHT AND 90 DEGREES) This specification is approved for use by the Naval Sea Systems Command and
2、is available for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-24231. REQUIREMENTS: 1. Dimensions and configuration: see figures 1 through 11. 2. For cable wiring con
3、nections, see applicable table in appendix A of MIL-DTL-24231. 3. Ni-Cu plug sleeves shall be coated with plasma spray non-conductive material in accordance with S9320-AM-PRO-030/MLDG. 4. All dimensions are in inches. 5. Tolerances shall be as follows, or as stated: a. Decimals 0.005 inch. b. Fracti
4、ons 164 inch. c. Angular dimensions degree. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 2 FIGURE 1. Connector, plug, molded typical. FIGU RE 1. Co nnector , plu g, molded - typical.MOLD ED PLUG ASSEMBL YM2423 1/4-001 (14 COND
5、) SYM N O. 713.2ORM2423 1/4-002 (24 COND) SYM N O. 713.3ORM2423 1/4-003 (30 COND) SYM N O. 713.4ORM2423 1/4-004 (40 COND) SYM N O. 713.10ORM2423 1/4-005 (40 CO ND )CABLE TYPE AND LENGTHAS S PECIFIED IN THECONTRACT OR O R D ER .25164515163 MIN932COUPLIN GM24231/4-01 1IN SERT ASSEMBLY1COMP OUND ,POLY
6、UR ETHAN EPLUG SLEEVEM24231/4-01 0SOFT S OLD ERTO CON DUC TORSCOMP OUND , EPOXY17221218 19 20 21101612345Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 3 FIG URE 2 . Con ne ctor , p lug, 14 -con du ctor (s t r ai gh t ) M 24 23
7、1/ 4- 00 1. 1KE Y MU ST B E LO CA TE DIN P OS IT IO N SH O WN .1 89 14 7131011 1265432FIGURE 2. Connector, plug, 14-conductor (straight) M24231/4-001. 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 4 FIGURE 3. Connect or, p lu
8、g, m olded, 24-conductor(straig ht) M24231/4-002 .2KEY MU ST BE LOC ATEDIN POSIT ION SHOW N.12 141312111098765431NUM BER ARRAN GEMENT F ORM24231 /4-00 22 1415313231222211110204561817167891924FIGURE 3. Connector, plug, molded, 24-conductor (straight) M24231/4-002. 2 Provided by IHSNot for ResaleNo re
9、production or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 5 252627282930FIGU RE 4. Conne ctor, plug, mold ed, 30-condu ctor (straig ht) M24231/4-002.3KEY M UST BE LOC ATEDIN POSITION S HOWN.12 14282930987251NU MB ER AR RA NGEMENT FORM2 423 1/4-0 032 14153132312222111102045
10、618171678919243613102627FIGURE 4. Connector, plug, molded, 30-conductor (straight) M24231/4-003. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 6 18332R164R1.8592.5942.7503.375116RALL OVE R181 .37512FIG URE 5. Coupling - M2423
11、1/4 -011 .1251812(8) SLOTS EQ UALLY SPACED.2 .750-12UN- 2B38FIGURE 5. Coupling M24231/4-011. 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 7 FIGURE 6. Protective cap - M24231/4-011 .125ALL OVER1273218SLOT182.750-12 U N - 2 A
12、UNDERCUT T OROO T OF T H D .7321532193211FIGURE 6. Protective cap M24231/4-012. 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 8 14516DRI LLTHRU .234IN SULAT IN G D ISK 1.66 2BY 116THK (P RES S F IT )M242 31/ 4- 02 11218116R0
13、.8122.750-12 U N - 2 A301161 .64 2125ALL OVEREXCEPT AS SH OWN322.0362.0322.3662.362329320.5940.56212532FIGURE 7. Sealing pl ug .150.8210.0 51 R+0. 00 1-0. 00 113+0. 00 3-0. 00 3FIGURE 7. Sealing plug. 15 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-
14、,-MIL-DTL-24231/4E(SH) 9 FIGURE 8. Plug sleeve - M242 31/4-010 .102.3772.37330 APPROX.2 .56 2125ALL OVEREXCEPT AS SH OWN15320.859+0. 00 0-0. 00 9FORM T O SHAPEAS SHOW N .0.0 46 R+0. 00 1-0. 00 1+0. 00 0-0. 00 5+0. 00 0-0. 00 9116R*1732* ENLARG E AS R EQUIRE DTO SU IT C ABLE DI AMET ER.1 .81 112716MI
15、 N132RROUND AL L ED GES .0.8593320.0930.094+0. 00 0-0. 00 50.5942.7342.7043.0152.9851 .50 0+0. 00 5-0. 00 01 .62 432FIGURE 8. Plug sleeve M24231/4-010. 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 10 FIGURE 9. Sealing plug
16、assembly M24231/4-020. SEALING PLU GGASKET , O-RIN GSAE- AS28 7 75 - 32 9M24 2 31 / 4- 00 1ORM24 2 31 / 4- 00 2ORM24 2 31 / 4- 00 3ORM24 2 31 / 4- 00 4ORM24 2 31 / 4- 00 5ORM24 2 31 / 4- 00 6ORM24 2 31 / 4- 00 7ORM24 2 31 / 4- 00 8ORM24 2 31 / 4- 00 91514FIGU RE 9. Sea lin g p lu g a sse mbl y - M24
17、231/ 4-020 .2323 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 11 FIGURE 10. Connector, plug, molded, 40-conductor M24231/4-004, M24231/4-005, and M24231/4-009. FIGURE 10. Connector, plug , molded, 40-conductor - M24231/4-004,
18、M24231/4-005, andM24231/4-009.4KEY MU ST BE LOC ATEDIN POSIT ION SHOW NNOTE: M24231 /4-004 A ND M242 31/4-005 ARE PH YSIC ALL Y T HESAME. T HE PART NUMBERS DEF IN E U SAGE,(S EE AP PE NDIX A OF MI L- DT L- 24 23 1) .NUM BER ARRAN GEMENT F ORM24231 /4-004 OR M24231/4- 00 51216153456789101112131418102
19、3456791112131415161718192021222324252627282930 3132333435363738 39404 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 12 FIGURE 11. Connector, plug, molded, 14-, 24-, 30-, and 40-conductor (90-degree). FIGU R E 11. C onne ctor, p
20、lug , molded , 14-, 2 4-, 30 -, and 40-co nduct or (90-deg ree) .1214289872536131026272930D ETAIL FORM 24231/4-0 03KEY MUS T BE L OCATEDIN POSITION SHOWN.18R193245538C OMPOUN D,EPOXY23162516318(M IN)C OMPOUN D,POLY URE THANEC ABLE TYP E ANDLENG TH AS SPECIFIED.M OLD MA RKINGD ATA IN 18HIGHLETTERS.IN
21、SERTASSY14 CO ND UCTOR90 PLUG AS SEMBLYM 24231/4-0 06SAME AS M2 4231/4-00 1EXCE PT AS SHOWN.30 CO ND UCTOR90 PLUG AS SEMBLYM 24231/4-0 08SAME AS M2 4231/4-00 3EXCE PT AS SHOWN.24 CO ND UCTOR90 PLUG AS SEMBLYM 24231/4-0 07SAME AS M2 4231/4-00 2EXCE PT AS SHOWN.40 CO ND UCTOR90 PLUG AS SEMBLYM 24231/4
22、-0 09SAME AS M2 4231/4-00 4EXCE PT AS SHOWN.SR 15328221618 1920 21697Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH)13 TABLE I. Parts list. Item no. 1/ Description 2/ Quantity for M24231/4- 3/ Material/specification Remarks 001 0
23、02 003 004 005 006 007 008 009 1 Plug assembly, 14-conductor, symbol no. 713.2 1 4/ See figure 2. 2 Plug assembly, 24-conductor, symbol no. 713.3 1 4/ See figure 3. 3 Plug assembly, 30-conductor, symbol no. 713.4 1 4/ See figure 4. 4 Plug assembly, 40-conductor, symbol no. 713.10 1 4/ See figure 10.
24、 5 Plug assembly, 40-conductor 1 4/ See note on figure 10. 6 Plug assembly, 90 degrees, 14-conductor 1 4/ See figure 11. 7 Plug assembly, 90 degrees, 24-conductor 1 4/ See figure 11. 8 Plug assembly, 90 degrees, 30-conductor 1 4/ See figure 11. 9 Plug assembly, 90 degrees, 40-conductor 1 4/ See figu
25、re 11. 10 Sleeve, plug 1 1 1 1 1 1 1 1 1 Ni-Cu, Class A, QQ-N-281 or glass reinforced epoxy (GRE) 5/ See figure 8 and requirement 3. 11 Cap, protective 1 1 1 1 1 1 1 1 1 Plastic, Type MAI-60, ASTM D5948 or polycarbonate, ASTM D3935 6/ Nonpressure-proof, see figure 6. 12 Coupling 1 1 1 1 1 1 1 1 1 Ni
26、-Al-BRZ, ASTM B150/B150M See figure 5. 13 Disk, insulating, 1.662 diameter by 116 thick 1 1 1 1 1 1 1 1 1 Non-laminated plastic, composition A, Type II, Grade GU, L-P-535 See figure 7. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(
27、SH)14 TABLE I. Parts list Continued. Item no. 1/ Description 2/ Quantity for M24231/4- 3/ Material/specification Remarks 001 002 003 004 005 006 007 008 009 14 Gasket, O-ring 1 1 1 1 1 1 1 1 1 SAE-AS28775-329 Lubricate with silicone compound, SAE-AS8660; see figure 9. 15 Sealing plug 1 1 1 1 1 1 1 1
28、 1 Ni-Cu, Class A, QQ-N-281 Pressure-proof, see figure 3 and figure 7. 16 Compound, polyurethane As required 7/ See figure 1 and figure 11. 17 Cable As required 8/ See figure 1. 18 Insert assembly, 14-conductor 1 1 M24231/29-006 See figure 1. 19 Insert assembly, 24-conductor 1 1 M24231/29-007 See fi
29、gure 1. 20 Insert assembly, 30-conductor 1 1 M24231/29-008 See figure 1. 21 Insert assembly, 40-conductor 1 1 1 M24231/29-009 See figure 1. 22 Compound, epoxy As required Cast epoxy resin compound 9/ Base EE4183 or RE2039, hardener HD-3561; see figure 1 and figure 11. 23 Sealing plug assembly 10/ 1
30、1 1 1 1 1 1 1 1 See items 14 and 15 See figure 9. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH)15 TABLE I. Parts list Continued. NOTES: 1/ Item numbers are the same as encircled numbers shown on figures. 2/ See applicable figur
31、e or table listed in remarks column for part numbers and dimensions. 3/ Quantity is for one complete assembly of each size. 4/ When plugs are purchased as a kit, the inserts are not molded in accordance with MIL-DTL-24231/29. The socket contacts and sleeving are individually provided. 5/ GRE plug sl
32、eeves may be obtained from D.G. OBrien, Inc., Sea Con/Phoenix, Inc., or equal. 6/ May be Ni-Al-BRZ in accordance with ASTM B150/B150M at the option of the manufacturer. 7/ Molding compound to be procured in accordance with S9320-AM-PRO-020. 8/ For cable type, see table for cross index of mating plug
33、s, receptacles, adapters, and single and multiple cable connectors of MIL-DTL-24231. 9/ Hysol base EE4183 or RE2039, hardener HD-3561, Hysol Division, Dexter Corporation, Olean, NY, CAGE 04347, or equal. 10/ To be supplied when specified (see acquisition requirements of MIL-DTL-24231). Provided by I
34、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24231/4E(SH) 16 CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Preparing activity: Navy
35、 SH (Project 5935-2011-053) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
