1、 KSKSKSKSKSKSKSK KSKSKS KSKSK KSKS KSK KS KS V ISO 7462 KS V ISO 7462:2012 2012 11 6 http:/www.kats.go.krKS V ISO 7462:2012 : ( ) ( ) () () () ( ) : (http:/www.standard.go.kr) ： ：2002 11 30 ：2012 11 6 2012-0584 ： ： ( 02-509-7274) (http:/www.kats.go.kr). 10 5 , . KS V ISO 7462:2012 i ii 1 1 2 1 3 1 3
2、.1 (baseline).1 3.2 (extreme) 1 3.3 (load waterline) .2 3.4 (maximum section).2 3.5 (midships).2 3.6 (moulded) 2 3.7 (perpendicular) 2 3.8 after perpendicular(AP) 2 3.9 forward perpendicular(FP) .2 3.10 (section) .2 3.11 (station).2 3.12 (waterplane) .2 3.13 (load waterplane) 3 4 ( 1 )3 4.1 (breadth
3、), B .3 4.2 (depth), D3 4.3 (displacement) .3 4.4 , T 4 4.5 (length) 4 4.6 .5 5 .5 5.1 .5 5.2 .5 5.3 .5 5.4 .5 5.5 (trim ratio).5 7 KS V ISO 7462:2012 ii 1985 1 ISO 7462, Shipbuilding Principal ship dimensions Terminology and definitions for computer applications . KS V ISO 7462:2012 Principal ship
4、dimensions Terminology and definitions for computer applications 1 , . 2 . . ( ) . KS C IEC 60529, (IP ) KS R ISO 6722, 60 V 600 V , KS V ISO 8846, KS V ISO 10239, KS V ISO 10240, KS V ISO 13297, KS V ISO 13298, ( ) IEC 60947 7-1： 1999, Low-voltage switchgear and controlgear Part 7： Ancillary equipm
5、ent Section one： Terminal blocks for copper-conductors 3 3.1 (baseline) , (designed summer) . (moulded surface) , . 3.2 (extreme) . KS V ISO 7462:2012 2 , (fender) (rubbing strake) . 3.3 (load waterline) . . . 3.4 (maximum section) 3.5 (midships) 3.6 (moulded) . . . , FRP, . 3.7 (perpendicular) 3.8
6、after perpendicular(AP) , (rudder stock) 3.9 forward perpendicular(FP) 3.10 (section) 3.11 (station) 3.12 (waterplane) KS V ISO 7462:2012 3 3.13 (load waterplane) 4 ( 1 ) 4.1 (breadth), B . (moulded breadth) (extreme breadth) . , 4.1.14.1.3 . 4.1.1 4.1.2 4.1.3 4.2 (depth), D 4.2.1 (depth, moulded) 4
7、.3 (displacement) , (moulded displacement) (shell displacement) . 4.3.1 (displacement, mass) . “ ” 1.025, “ ” . “ (tonnes)” , (tonnage) . 4.3.2 (displacement, volume) KS V ISO 7462:2012 4 4.4 , T 4.4.1 (draught moulded) 4.4.2 (draught extreme) . 4.4.3 4.4.5 . 4.4.3 (draught aft), TA 4.4.4 (draught a
8、midships), TM 4.4.5 (draught forward), TF , . 4.5 (length) 4.5.14.5.4 . 4.5.1 , LPP 4.5.2 , LOA 4.5.3 (length of waterline), LWL 4.5.4 (length overall submerged), LOS . KS V ISO 7462:2012 5 4.6 (TF TA) . . (datum) . (positive) , (negative) . “ ” “ ” . 5 5.1 . ( ) ( ) ( ) . . . 5.2 ( ) ( ) 5.3 . ( )
9、( ) 5.4 . ( ) ( ) 5.5 (trim ratio) KS V ISO 7462:2012 6 (moulded lines) 1 KS V ISO 7462:2012 7 (baseline) 3.1 (length) 4.5 (depth), D 4.2 (section) 3.10 (load waterplane) 3.13 (load waterline) 3.3 5.1 (displacement) 4.3 (draught aft), TA 4.4.3 (draught forward), TF 4.4.5 (midship) 3.5 (perpendicular
10、) 3.7 , LPP 4.5.1 (waterplane) 3.12 (station) 3.11 (volume) 4.3.2 (forward perpendicular) 3.9 , LOA 4.5.2 5.4 (draught amidships), TM 4.4.4 5.3 4.3.1 (maximum section) 3.4 4.1.2 (extreme) 3.2 4.1.3 4.1.1 5.2 4.4.2 (length overall submerged), LOS 4.5.4 4.6 (trim ratio) 5.5 (breadth), B 4.1 4.2.1 (mou
11、lded) 3.6 (draught moulded) 4.4.1 (after perpendicular) 3.8 (length of waterline), LWL 4.5.3 153787 1 92 3(13) (02)26240114 (02)262401489 http:/ Korean Agency for Technology and Standards http:/www.kats.go.kr KS V ISO 7462:2012 KSKSKS SKSKS KSKS SKS KS SKS KSKS SKSKS KSKSKS Principal ship dimensions Terminology and definitions for computer applications ICS 01.040.47; 35.240.50; 47.020.01
