1、INTERNATIONAL TELECOMMUNICATION UNIONITU-T Q.2961 BTELECOMMUNICATIONSTANDARDIZATION SECTOROF ITU(12/2000)SERIES Q: SWITCHING AND SIGNALLINGBroadband ISDN B-ISDN application protocols foraccess signallingDigital subscriber signalling system No. 2(DSS2) Additional traffic parameters:Protocol implement
2、ation conformancestatement (PICS) proformaITU-T Recommendation Q.2961 B(Formerly CCITT Recommendation)ITU-T Q-SERIES RECOMMENDATIONSSWITCHING AND SIGNALLINGSIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59FUNCTIONS AND INFORMATION FLOWS F
3、OR SERVICES IN THE ISDN Q.60Q.99CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4 AND No. 5 Q.120Q.249SPECIFICATIONS OF SIGNALLING SYSTEM No. 6 Q.250Q.309SPECIFICATIONS OF SIGNALLING SYSTEM R1 Q.310Q.399SPECIFICATIONS OF SIGNALLING SYSTEM R2 Q.400Q.499
4、DIGITAL EXCHANGES Q.500Q.599INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700Q.849DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999PUBLIC LAND MOBILE NETWORK Q.1000Q.1099INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199INTELLIGENT NETWORK Q.1200Q.
5、1699SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700Q.1799BROADBAND ISDN Q.2000Q.2999General aspects Q.2000Q.2099Signalling ATM adaptation layer (SAAL) Q.2100Q.2199Signalling network protocols Q.2200Q.2299Common aspects of B-ISDN application protocols for access signalling and network signa
6、llingand interworkingQ.2600Q.2699B-ISDN application protocols for the network signalling Q.2700Q.2899B-ISDN application protocols for access signalling Q.2900Q.2999For further details, please refer to the list of ITU-T Recommendations.ITU-T Q.2961 B (12/2000) iITU-T Recommendation Q.2961 BDigital su
7、bscriber signalling system No. 2 (DSS2) Additional traffic parameters:Protocol implementation conformance statement (PICS) proformaSummaryThis Recommendation specifies the Protocol Implementation Conformance Statement (PICS)proforma for the TBreference point or coincident SBand TBreference point (as
8、 defined inITU-T I.413 7) of implementations conforming to the procedures for the handling of additionaltraffic parameters that may be used for basic call and connection control of the Digital SubscriberSignalling System No. 2 (DSS2) protocol for the Broadband Integrated Services Digital Network(B-I
9、SDN), ITU-T Recommendations of the Q.2961 series 1, 2, 3, 4, 5 and 6.Other Recommendations of the Q.2961 family specify Test Suite Structure and Test Purposes(TSS it is based on anexternal SDOs standard published in English.SourceITU-T Recommendation Q.2961 B was prepared by ITU-T Study Group 11 (20
10、01-2004) andapproved under the WTSA Resolution 1 procedure on 6 December 2000.ii ITU-T Q.2961 B (12/2000)FOREWORDThe International Telecommunication Union (ITU) is the United Nations specialized agency in the field oftelecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a p
11、ermanent organ ofITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendationson them with a view to standardizing telecommunications on a worldwide basis.The World Telecommunication Standardization Assembly (WTSA), which meets every four years,establis
12、hes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on thesetopics.The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1.In some areas of information technology which fall within ITU-Ts purview, the necessary standards
13、 areprepared on a collaborative basis with ISO and IEC.NOTEIn this Recommendation, the expression “Administration“ is used for conciseness to indicate both atelecommunication administration and a recognized operating agency.INTELLECTUAL PROPERTY RIGHTS ITU draws attention to the possibility that the
14、 practice or implementation of this Recommendation mayinvolve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence,validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or othersoutside of the Recommendation deve
15、lopment process.As of the date of approval of this Recommendation, ITU had not received notice of intellectual property,protected by patents, which may be required to implement this Recommendation. However, implementors arecautioned that this may not represent the latest information and are therefor
16、e strongly urged to consult theTSB patent database. ITU 2001All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical, including photocopying and microfilm, without permission in writing from ITU.ITU-T Q.2961 B (12/2000) iiiCO
17、NTENTSPage1 Scope . 12 References 13 Endorsement. 24 Coverage 25 Modifications . 25.1 General. 25.2 Abbreviations . 35.3 Conventions . 35.4 Additional capabilities 45.5 CDVT descriptor IE . 85.6 Information elements contents for the user 105.7 Information elements contents for the network . 17Append
18、ix I Bibliography 25ITU-T Q.2961 B (12/2000) 1ITU-T Recommendation Q.2961 BDigital subscriber signalling system No. 2 (DSS2) Additional traffic parameters:Protocol implementation conformance statement (PICS) proforma1ScopeThis Recommendation specifies the Protocol Implementation Conformance Statemen
19、t (PICS)proforma for the TBreference point or coincident SBand TBreference point (as defined inITU-T I.413 7) of implementations conforming to the procedures for the handling of additionaltraffic parameters that may be used for basic call and connection control of the Digital SubscriberSignalling Sy
20、stem No. 2 (DSS2) protocol for the Broadband Integrated Services Digital Network(B-ISDN), ITU-T Recommendations of the Q.2961 series 1, 2, 3, 4, 5 and 6.Other Recommendations of the Q.2961 family specify Test Suite Structure and Test Purposes(TSS users ofthis Recommendation are therefore encouraged
21、to investigate the possibility of applying the mostrecent edition of the Recommendations and other references listed below. A list of the currentlyvalid ITU-T Recommendations is regularly published.1 ITU-T Q.2961.1 (1995), Digital subscriber signalling system No. 2 Additional trafficparameters: Addi
22、tional signalling capabilities to support traffic parameters for the taggingoption and the sustainable cell rate parameter set.2 ITU-T Q.2961.2 (1997), Digital subscriber signalling system No. 2 Additional trafficparameters: Support of ATM transfer capability in the broadband bearer capabilityinform
23、ation element.3 ITU-T Q.2961.3 (1997), Digital subscriber signalling system No. 2 Additional trafficparameters: Signalling capabilities to support traffic parameters for the available bit rate(ABR) ATM transfer capability.2 ITU-T Q.2961 B (12/2000)4 ITU-T Q.2961.4 (1997), Digital subscriber signalli
24、ng system No. 2 Additional trafficparameters: Signalling capabilities to support traffic parameters for the ATM block transfer(ABT) ATM transfer capability.5 ITU-T Q.2961.5 (1999), Digital subscriber signalling system No. 2 Additional trafficparameters: Additional traffic parameters for cell delay v
25、ariation tolerance indication.6 ITU-T Q.2961.6 (1998), Digital subscriber signalling system No. 2 Additional trafficparameters: Additional signalling procedures for the support of the SBR2 and SBR3 ATMtransfer capabilities.7 ITU-T I.413 (1993), B-ISDN user-network interface.8 ETSI EN 301 068-2 V1.1.
26、3 (2000), Broadband Integrated Services Digital Network(B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connectioncharacteristics; ATM transfer capability and traffic parameter indication; Part 2: ProtocolImplementation Conformance Statement (PICS) proforma specification.3 End
27、orsementThe text of ETSI EN 301 068-2 8 was approved by ITU-T as Recommendation Q.2961 B withagreed modifications as given below.NOTE Underlining and/or strike-out is used to highlight new or deleted text where detailed indication ofmodifications is necessary.4 CoverageThis Recommendation covers ITU
28、-T Q.2961.1 1, Q.2961.2 2 as modified by ITU-T Q.2961.2Corrigendum 1 (03/99), Q.2961.3 3, Q.2961.4 4, Q.2961.5 5 and Q.2961.6 6.5 Modifications5.1 GeneralThroughout the text of ETSI EN 301 068-2 8 replace references and text as shown in the followingtable:Reference in ETSI EN 301 068-2 Modified refe
29、renceEN 301 068-1 Q.2961-series RecommendationsEN RecommendationStandard RecommendationPage 4, Intellectual Property RightsDelete the whole section.Page 4, ForewordDelete the whole Foreword.NOTE1ItisreplacedbytheForewordofthisRecommendation.ITU-T Q.2961 B (12/2000) 3Page 5, Clause 1 ScopeReplace the
30、 whole clause with the following:“1 ScopeSee clause 1 Scope of this Recommendation above.“Page 5, Clause 2 ReferencesReplace references 1 and 3 with the following below:1 Void3 VoidNOTE 2 These references are not used in the body of ETSI EN 301 068-2 but in its Scope, which isreplaced by the Scope o
31、f this Recommendation.Page 21, HistoryDelete the whole clause “History“.5.2 AbbreviationsIn clause 3.2 “Abbreviations“, add the following new abbreviations:CDVT Cell Delay Variation ToleranceFRBS Frame Relaying Bearer ServiceFRT Fixed Round-trip TimeICR Initial Cell RateMBS Maximum Burst SizeMCR Min
32、imum Cell RatePCR Peak Cell RateRDF Rate Decrease FactorRIF Rate Increase FactorRM Resource Management (cell)SCR Sustainable Cell RateTBE Transient Buffer Exposure5.3 ConventionsModify the section “Reference column“ of clause A.1.2 “Abbreviations and conventions“ as below:Reference column“The refere
33、nce column makes reference to EN 301 068-14,except where explicitly statedotherwise. Whenever reference is made directly to ITU-T Q.2961.x, it means as endorsed byEN 301 068-14.“4 ITU-T Q.2961 B (12/2000)5.4 Additional capabilitiesModify Table A.1 “Roles“ of clause A.5 “Roles“ as below:Item Major ro
34、le:Does the implementation support .Conditionsfor statusStatus Reference SupportR1.1 theuserrole? O.1 YesNoR1.2 thenetworkrole? O.1 YesNoR2.1 support requirements for thecoincident SB and TB reference pointO.2 YesNoR2.2 support requirements for the TBreference pointO.2 YesNoO.1 It is mandatory to su
35、pport exactly one of these items.O.2 Support of one, and only one, of these options is required.Comments:ITU-T Q.2961 B (12/2000) 5Modify Table A.2 “Major capabilities“ of clause A.6.1 “Major capabilities“:Item Major capability:Does the implementation .Conditionsfor statusStatus Reference SupportMCu
36、1 support the DBR ATC? O.2 Q.2961.2 Yes NoMCu2 support the SBR ATC? O.2 Q.2961.2 Yes NoMCu2.1 support the SBR configuration 1(SBR1) ATC?MCu2NOT Mcu2O.3N/AQ.2961.2 Yes NoN/AMCu2.2 support the SBR configuration 2 or 3like(SBR2/3-like) ATC (Note)?MCu2NOT Mcu2O.3N/AQ.2961.2 Yes NoN/AMCu2.3 support the S
37、BR configuration 2(SBR2) ATC?MCu2NOT MCu2O.3N/AQ.2961.6 YesNoN/AMCu2.4 support the SBR configuration 3(SBR3) ATC?MCu2NOT MCu2O.3N/AQ.2961.6 YesNoN/AMCu3 support the ABR ATC? O.2 Q.2961.3 Yes NoMCu4 support the ABT ATC? O.2 Q.2961.4 Yes NoMCu4.1 support the ABT with Immediatetransmission (ABT-IT) ATC
38、?MCu4NOT MCu4O.4N/AQ.2961.4 Yes NoN/AMCu4.2 support the ABT with delayedtransmission (ABT-DT) ATC?MCu4NOT MCu4O.4N/AQ.2961.4 Yes NoN/AMCu5 support the CDVT indication? O.2 Q.2961.5 YesNoO.2 The support of at least one of these items is mandatory.O.3 The support of at least one of these items is mand
39、atory.O.4 The support of at least one of these items is mandatory.NOTE The SBR2/3-like ATC identified in ITU-T Q.2961.2 areis different from SBR2 and SBR3 definedin ITU-T I.371 (see Note 14 to Table A.1/Q.2961.2, published in ITU-T Q.2961.2 Corrigendum 1),inthatthe Tagging traffic management option
40、applies only locally and the request support applies separately toeach direction of the connection. Further, the Broadband traffic capability field coding in the Broadbandbearer capability information element are is different. A future version of the present standard will coverthe SBR2 and SBR3 ATCs
41、 signalling support as specified in ITU-T Recommendation Q.2961.6.Comments:6 ITU-T Q.2961 B (12/2000)Modify Table A.3 “Subsidiary capabilities“ of clause A.6.2 “Subsidiary capabilities“:Item Subsidiary capability:Does the implementation .Conditionsfor statusStatus Reference SupportSCu1 recognize add
42、itional Broadband bearercapability codepoints received, forbackward compatibility with CBR(Note 1)?MCu1NOT MCu1ON/A2.6.1Q.2961.2YesNoN/ASCu2 recognize additional Broadband bearercapability codepoints received, forbackward compatibility with VBR(Note 2)?MCu2NOT MCu1ON/A2.6.1Q.2961.2YesNoN/ASCu3 handl
43、e traffic management options forlocal support of tagging?MCu2.2NOTMCu2.2ON/A1.9.2Q.2961.1YesNoN/ASCu3.1 send local tagging request in outgoingcall request (Note 3)?SCu3NOT SCu3ON/A1.9.2.1Q.2961.1YesNoN/ASCu.3.2 indicate local tagging not allowed(Note 4)?SCu3NOT SCu3ON/A1.9.2.2Q.2961.1YesNoN/ANOTE 1
44、Constant Bit Rate (with end-to-end timing required) information transfer capability as supportedin the first edition of ITU-T Q.2931.NOTE 2 Variable Bit Rate (with end-to-end timing required or not required) information transfercapability as supported in the first edition of ITU-T Q.2931.NOTE 3 If l
45、ocal tagging is requested and indicated as being applied by the network, then an SBRconfiguration 3 (SBR3) is provided locally. Otherwise SBR configuration 2 (SBR2-like) service isprovided with locally tagging.NOTE 4 If local tagging is not allowed, then an SBR configuration 2 (SBR2-like) service is
46、 requestedand shall apply locally.Comments:ITU-T Q.2961 B (12/2000) 7Modify Table A.8 “Major capabilities“ of clause A.7.1 “Major capabilities“:Item Major capability:Does the implementation .Conditionsfor statusStatus Reference SupportMCn1 support the DBR ATC? O.7 Q.2961.2 Yes NoMCn2 support the SBR
47、 ATC? O.7 Q.2961.2 Yes NoMCn2.1 support the SBR configuration 1(SBR1) ATC?MCn2NOT MCn2O.8N/AQ.2961.2 Yes NoN/AMCn2.2 support the SBR configuration 2 or 3like (SBR2/3-like) ATC (Note)?MCn2NOT MCn2O.8N/AQ.2961.2 Yes NoN/AMCn2.3 support the SBR configuration 2(SBR2) ATC?MCu2NOT MCu2O.8N/AQ.2961.6 YesNo
48、N/AMCn2.4 support the SBR configuration 3(SBR3) ATC?MCu2NOT MCu2O.8N/AQ.2961.6 YesNoN/AMCn3 support the ABR ATC? O.7 Q.2961.3 Yes NoMCn4 support the ABT ATC? O.7 Q.2961.4 Yes NoMCn4.1 support the ABT with Immediatetransmission (ABT-IT) ATC?MCn4NOT MCn4O.9N/AQ.2961.4 Yes NoN/AMCn4.2 support the ABT with delayedtransmission (ABT-DT) ATC?MCn4NOT MCn4O.9N/AQ.2961.4 Yes NoN/AMCn5 support the CDVT indication? O.7 Q.2961.5 YesNoO.7 The support of at least one of these items is mandatory.O.8 The support of at least one of these items is mandatory.O.9 The support
