欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    GME QS 131700-1987 Steel (English German)《钢 英语 德语》.pdf

    • 资源ID:756401       资源大小:695.03KB        全文页数:14页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    GME QS 131700-1987 Steel (English German)《钢 英语 德语》.pdf

    1、.- 8 - Y 3 L y - E O 4: C lu, Arm nc:n e-iec 300 ADAM Aktiengerellschoft OPEL Techn. Lieferbedingungen 9s 1317 00 Stahl Werksfoff-Entwicklung fr Werkstoffe 1 Werkstoff Unlegierter Kohlenstoffstahl; besonders beruhigt vergossen. 2 Herstellverfahren Das Erschmelzungsverfahren, die Art der Vergieung de

    2、s Stahles und das Forrngebungsverfahren des Erzeugnisses bleiben dem Hersteller berlassen. In Sonderfllen knnen jedoch Vereinbarungen bei der Bestellung (siehe Materialfreigabe) getroffen werden. 3 Verwendunqsform und Lieferzustand Verwendungsform Li e f er zus t an d Bezeichnung 3.1 Knppel - oder S

    3、tabstahl warmgewalzt, zunderfrei QS 1317 SO fr Verschmiedung - 3.2.1 3.2.2 warmgewalzt, zunderfrei ka1 tgezogen QS 1317 AO US 1317 AH 3.3.1 warmgewalzt, zunderfrei QS 1317 FO 3.3.2 kaltgezogen, geglht QS 1317 FH 3.4.1 1) fr Verwendungsform zunderfrei QS 1317 ZO Band Fr diesen Lieferzustand 9s 1317 e

    4、o kann sowohl warmgewalttes (Pos. 3.4.2) als auch kalt- . gewalztes (Pos. 3.4.3) Band oder Blech verwendet werden 3.4.2 3.b.3 warmgewalzt, zunderfrei QS 1317 ZW qs 1317 ew kaltgewalzt, geglht QS 1317 ZH (leicht kalt nachgewalzt), QS 1317 BH Unbeschaoet erwoiger durch den Abnehmer erfolgenden Stichpr

    5、obenprfungen trgt der Lieferont die Verontworiung dafr. dafi die gcliefene Wore aie Opel -Zeicfinungsvors ;s 680 I 355 lngs 14 149 bis 197 143 bis 183 quer 12 I 440 bis 630 Band und Blech, kaltgewalzt, geglht, leicht kalt nachgewalzt, zunderfrei QC 1317 ZK (QS 1317 BK) I 510 bis I I quer I 149 Ig7 3

    6、2 5 Die in Pos. 6.2.4 angegebenen mechanischen Eigenschaften gelten fr einen Zeitraum von 6 Monaten nach vereinbarter Zurverfgungsstellung. Auf den Var- wendunqszweck ausgerichtete Zusatzvereinbarungen knnen zu abweichenden -Werten fhren. J 6 Seite 4 von 7 S. I Genehmigt: 1 I I Aurfertigungr-Nr.: 5

    7、I Datum: 3/87 I Ausgafdigt: ADAM Aktiengesellschaft OPEL Werkstoff-Entwicklung 6.3 6.4 6.5 6.5.1 6-5.2 6.5.3 6.6 6.6. I 6.6-2 6.6.3 6.6.4 Techn. Lieferbedingungen 9s 1317 00 Stahl fr Werkstoffe -_ - - -“ her bb r uc hp r o b e Rei Stabstahl und Draht im Anlieferunqszustand darf nach Durchfhrung der

    8、Kerbbruchprobe kein verfarrnungsloser Bruch entstehen. - Sc hweibarkei t Die Eignung dieses Stahles zum Schweien mit den blichen Schwei- Verfahren (Schmelz- und Widerstandsschweien) mu gewhrleistet sein. Gefge - Im Lieferzustand fr “Zerspanung1I mu13 dieser Stahl ein Gefge aus Ferrit und vorwiegend

    9、lamellarem Perlit in homogener Verteilung aufweisen. Der Werkstoff soll keine ausgeprgte Zeilenstruktur zeigen. Breite geschlossene Ferritbnder sind nicht zulssig. Im Lieferzustand “fr Haltumformung1I mu dieser Stahl, sofern nicht anders vereinbart, ein Gefge aus Ferrit und vorwiegend kugelig eingef

    10、ormtem Perlit aufweisen. (GHZ-geglht auf kugelige Carbide). Ausgeprgter Tertirzementit auf den Horngrenzen, der zu Schwierigkeiten bei der Kaltumformung fhrt, ist nicht zulssig. Sulfid- und Oxidschlackeneinschlsse, die sich nachteilig auf die Zerspan- barkeit, Kaltumformbarkeit und Schweibarkeit aus

    11、wirken, sind nicht zu- lssig. Oberflchenbeschaf fenhei t . Die Erzeugnisse sollen eine dem angewendeten Formgebungcverfahren ent- sprechende glatte Oberflche haben. Fr alle erwendungsformen sind uere und innere Fehler nicht zulssig, wenn diese die Verarbeitung und Verwendung der gefertigten Teile me

    12、hr als unerheblich beeintrchtigen. Fr Zerspanung Vereinzelte Oberflchenf ehler, 2.8. Schalen, Riefen, berwalzungen, Risse und Randentkohlung sind dann zulssig, wenn sie innerhalb der Bearbeitungs- Zugabe vorkommen; sie drfen mit geeigneten Mitteln beseitigt werden, sofern die Verarbeitbarkeit und di

    13、e Funktionsfhigkeit der gefertigten Teile nicht nachteilig beeintrchtigt werden, Fr Haltumforrnung Beim Haltstauchversuch von Rundproben mit planparallelen Endflchen und einer Ausgangshhe ho = 1,5 do (do = Proben-) dilrfen nach Stauchung auf 1/3 ihrer ursprnglichen Hhe die Proben nach dem Versuch ke

    14、ine Risse auf- weisen. Der Versuch erfolgt an Proben ohne Vernderung des Oberflchen- zus t andes. Unbeschooet erwoiger durch oen Abnehmer erfolgenden Stichprobenpriungen trg der Lieferont dte Verantwortung dafr, dofi die gelieferte Wore aie Opel-Zeichnun35vorimriften erfllt. Mustern sowie Teilen ein

    15、er ersten Serienlieferung ist unaufeeforaer7 ein PrfDericht mitrugeoen, ous dem ersichtlich ist, do0 die Spezifikationen erfllt werden. I . Seite 5 von 7 S. 4 Ausfertigungs-Nr.: 5 1 Datum: 3/87 I Ausgefertigt: L- 1 Genehmigt 4 1 OD+-Forr 66iM I QS 1317 O0 6.6.5 6.7 6.7.1 .Y 7 8 a. i 8.2 8.3 8.4 Ausb

    16、essern von Oberflchenfehlern durch Schweien ist nicht zulssig. Randen tko hl una Fr Haltumformung: Dieser Stahl rnu frei von Auskohlunq sein. Die Abkohlung darf folgende Werte nicht berschreiten: Durchmesser d rnm Zulssige Abkohlungstiefe hchstens mrn o, 10 o, 12 0,20 O, 16 0,24 (0,007 d) + 0,05 Zus

    17、 tzliche Forderunqen Abweichungen von den in diesen Technischen Lieferbedingungen festgelegten Anforderungen oder zustzliche Anforderungen mssen vereinbart werden, Diese sind in den jeweiligen Teilezeichnungen und/oder Materialfreigaben vorgeschrieben. Prfverfahren Alle Prfungen sind bei +23OC f 5 K

    18、 durchzufhren. Fr die Prfung der mechanischen Eigenschaften gelten DIN 50 145, 5,1975 Prfung metallischer Werkstoffe; Zugversuch Opel 100 Hrtevergleichstafeln fr Stahl und Stahlgu. Die Werte fr die Brinellhrte wurden nach diesen Tafeln aus den Werten fr die Zugfestigkeit ermittelt. Opel 101 Hrteprfu

    19、ng nach Brinell Das Gefge wird mikroskopisch am getzten Lngsschliff bei 500facher Ver- grerung beurteilt. Die Randentkohlung wird mikroskopisch am getzten Querschliff bei 100facher VergrBerung geprft, Auskohlung und Abkohlung sind dabei getrennt zu er- fassen. a Ausfartigungs-Nr.: 5 I Datum: 3/87 1

    20、Ausgewt: lib. I Ganahmgl:h I - I Seite 6 von 7 S. I I I 1 I ADAMOPEL Aktiengesellsdinfl I Techn. Lieferbedingungen 1 qc 1317 l f U r Werkstoff e Werkstoff -Entwicklung I I Stahl “s C O Y 3 C O Y U C 2 m C 2 Y U .- - L erfllt werden. L O00 1 Ausfertigungs.Nr. 5 I Datum. 3/87 I Ausgefertigt: L- 1 Gene

    21、hmigt I/ - I Seite 7 von 7 S. QS 1317 O0 Steel ENGINEERING MATE R IAL SPEC I FI CATI ON ADAM OPEL AG TEZ Material-Development and Testing Issue: Date of German Date of Translation Version: 3/87 issue: 2/88 1 Translation of Technische Ueferbedlngungen fr Werkstoffe QS 1317 O0 Stahl Translation Approv

    22、al: 1 Material Unalloyed carbon steel. The steel shall be specially killed. 2 Manufacturing Process The choice of melting process, method of casting and forming process are the prerogative of the manufacturer. In special cases, however, such details may be agreed upon on the order (see material rele

    23、ase). 3 Form of Supply and Condition of Delivery Form of supply Condition of delivery 3.1 Bar or Billet for Forging hot rolled, scale free 3.2 Bars for Machining 3.2.1 hot rolled, scale free 3.2.2 cold drawn 3.3 Bar or Wire for Cold Deformation 3.3.1 hot rolled, scale free 3.3.2 cold drawn, annealed

    24、 (final small cold re- duction permissible 3.4 Strip and Sheet 3.4.1 scale free For this condition of delivery either hot rolled (3.4.2) or cold rolled (3.4.3) strip or sheet can be used Designation QS 1317 SO QS 1317AO QS 1317AK QS 1317 FO QS 1317 FK QS 1317ZO QS 1317 BO* * For sfrip as hm of suppl

    25、y QS 1317 O0 Issue: 1 Form of supply Conditlon of delivery Designation Date of German Date of Translation Translation Approval: Page 2of 7 Version: 3/87 Issue: 2/88 3.4.2 3.4.3 hot rolled, scale free QS 1317ZW QS 1317 BW* cold rolled, annealed, (skin passed), scale free QS 1317 ZK QS 1317 BK* 3.5 No

    26、 General Specific Form of Supply 3.5.1 no general specific con- QS 1317 O0 3.5.2 cold drawn or cold rolled QS 1317 OK dition of delivery, scale free 3.6 Seamless Tubes see Technical Terms of Delivery QS 1317 NO 3.7 Welded Tubes see Technical Terms of Delivery QS 131 7 TO 4 Application This steel is

    27、used for components, which require increased mechanical properties. This steel shall be suitable for welding by any of the commonly used welding methods. This steel shall not normally be heat treated. 5 Note Samples of components or material released to this specification shall be tested for conform

    28、ity with the requirements of this specification and approved by Product Engineering Department prior to commencement of delivery of bulk supplies. In the event of any intentional deviations from the requirements of this specification, it is the sole responsibility of the supplier to inform the purch

    29、aser of all such deviations. Furthermore, the supplier shall submit unsolicited samples for reapproval by Product Engineering Department prior to commencement of delivery of deviant bulk supplies. 6 Material Requirements 6.1 Chemical Composition (Product Analysis) in % by Mass Carbon o,ia to 0,24 6.

    30、1.1 Silicon 0,60 max Manganese 1,70 max Phosphorus 0,050 max Sulphur 0,050 max Nitrogen 0,008 max 6.1.2 Additionally vanadium or niobium alloying up to 0.06 % by mass max is permissible. QS 1317 O0 sue: 1 6.1.3 These steels may be deoxidized with aluminium Instead of silicon. In this case the steel

    31、shall have a metallic aluminium content of 0,02 % by mass min. In special cases a specified method of desoxidation may be required. Such agreements shall be Indicated on the order details (see material release). 6.1.4 The specified maximum nitrogen content may be exceeded, provided that the phosphon

    32、is content is reduced 0,005 Ox, by mass below the specified maximum value per 0,001 % by mass nitrogen In excess. The nitrogen content shall not, however, exceed 0,014 % by mass. 6.1.5 Elements not listed in clause 6.1.1 shall not be added Intentionally to the steel apart from those used for the fin

    33、al treatments of the melt prior to casting without the agreement of the Opel PEK Material Development and Testing or Quality Assurance Departments. Provisions must be made to prevent the addition of such elements from scrap or other materlals used in the manufacturing process which would impair the

    34、mechanical properties and cerviceabiiity of the finished components. 6.1.6 Minor deviations from the limit values for the product analysis to 6.1.1 are permissible, if the specified mechanical properties to 6.2 are met and the serviceability of the finished components is not Impaired. 6.1.7 Appropri

    35、ate casts of steel St 523, material no. 1.0570 to DIN 17 100 (1.80) and draft DIN 1652, Part 2 (4.86) respectively or St 52-3 G, material no. 1 .O570 G to DIN 1623, Part 2 (2.86) may be used for the supply of this steel. Date of German Version: 3/87 Issue: Date of Translation 2/88 6.2 Mechanical Pro

    36、perties - as Delivered 6.2.1 For forging: QS 1317 SO This steel must be capable of being cold sheared in all applicable sizes. Hardness: 192 HB max 6.2.2 For machining 6.2.2.1 The following values are applicable to the hot rolled condition of delivery, scale free for the forms of supply QS 1317 AO,

    37、QS 1317 OO. Diameter in mm Tensile Upper yield strength stress fracture A, in % 2 3s 16 16 S 40 401 63 63 5 80 80 5 100 490 to 630 490 to 630 490 to 630 490 to 630 490 to 630 355 345 335 325 315 22 22 21 20 20 Brinell hardness with F = 30 D2 143 to 183 143 to 183 143 to 183 143 to 183 143 to 183 Ooe

    38、i Form 66 446-1 A WO il 87 ADAM OPEL AG QS 1317 O0 Diameter in mm 15 5110 101 16 16525 25 I 40 40 I63 63 I Tensile 0,2 proof Elongation Brinell strength stress after fracture with N/mm2 N/mm2 A, in 96 hardness F = 30 D2 Rm in Rp op ln min min 5 204 to 290 700 to 1000 600 6 190 to 277 650to 950 520 7

    39、 174 to 248 600to 850 450 550 to 800 400 8 160 to 235 9 154 to 229 530 to 780 350 520to 770 345 10 151 to226 500to 750 325 10 146 to 217 Designation Tensile strength Reduction of area Brinell hardness Rm in N/mm2 after fracture with F = 30 D2 Z in % max min max Designation 6.2.4.1 Strip and sheet, h

    40、ot rolled, normalized, scale free Tensile 0,2 proof Elongation Brinell strength stress after hardness F = 30 D2 Rm in N/mm2 RW2 in N/mm2 fracture Am with In Yo min QS 1317 ZW (QS 1317 BW) 355 c3mm 510 to 680 13mm 440 to 630 longitudinal 14 transverse 12 6.2.4.2 ,. Strip and sheet, cold rolled, annea

    41、led, skin passed, scale free I 149t0197 transverse 16 325 I QS1317ZK I 510to680 I (QS 1317 BK) 3mm 143 to 183 Issue: 1 Date of German Date of Translation Version: 3/87 Issue: 2/88 ! ssue: 1 QS 1317 O0 Date of German Version: 3/87 Issue: Date of Translation 6.2.4.3 The mechanical properties in clause

    42、 6.2.4 must be guaranteed; this applies to a period starting at the time when the products are made available as agreed when the order was placed and extending for 6 months. Additional agreements with regard to the application may necessitate different values. 6.3 Notch Fracture Test Bar and wire sh

    43、all show a ductile fracture after performance of the notch fracture test. 6.4 Weldability The material shall be suitable for welding by any of the commonly used welding methods (fusion and resistance welding). 6.5 Structure 6.5.1 In the condition of delivery Yor machining“ the steel shall have a str

    44、ucture of ferrite with predominantly lamellar pearlite in homogeneous distributlon. The material shall show no pronounced banded structure. Wide complete bands of ferrite are not permissible. 6.5.2 In the condition of delivery “for cold deformation“ the steel shall have, unless otherwise agreed upon

    45、, a structure of ferrite and predominantly spheroidal carbides (“GE“-annealed for spheroidal carbides). Pronounced tertiary cementite at the grain boundaries, which leads to difficulties in cold deformation, is not permissible. 6.5.3 Sulphides and oxide-type inclusions, which would adversely impair

    46、the machinability and cold workability are not permissible. 6.6 Surface Condition 6.6.1 The products shall have a smooth surface in accordance with the applied forming process. 6.6.2 For all forms of supply surface or internal defects are not permissible if they significantly affect the manufacture

    47、and serviceability of the finished parts. 6.6.3 For machining Sporadic surface defects, such as scales, grooves, laminations, cracks and surface decarburization are permissible, if they occur within the machining allowance. They may be eliminated using suitable means providing the manufacture and se

    48、rviceability of the finished parts is not affected. 6.6.4 For cold deformation Round test pieces with plane parallel end faces having an initial height ho = 1,5 do (dq = diameter of test piece) shall not show any cracks after having been upset forged in a cold upsetting test to 1 /3 of their origina

    49、l heigth. The test shall be performed on test pieces with the surface quality in the “as received“ condition. 6.6.5 Repair of surface defects by welding is not permissible. QS 1317 O0 Diameter d mm I8 as12 12 I 17 17 I23 23 I 27 27 Permissible partial decarburization max mm 0,lO 0,12 0,16 0,20 0,24 (0,007 * d) t 0,05 7 Additional Requirements 7.1 Deviations from the requirements specified in these technical terms


    注意事项

    本文(GME QS 131700-1987 Steel (English German)《钢 英语 德语》.pdf)为本站会员(unhappyhay135)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开