欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    GME L 000 0737-2008 Antiflutter elastic (English German).pdf

    • 资源ID:755631       资源大小:59.86KB        全文页数:9页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    GME L 000 0737-2008 Antiflutter elastic (English German).pdf

    1、 Number/Nummer:L 000 0737 GME MATERIAL SPECIFICATION Group/Gruppe: G Materials Page/Seite: 1 of/von 9 Engineering First Issue (English): 24-SE-2008 Erstausgabe (Deutsch): 24-SE-200revised/ berarbeitet Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/

    2、nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter Matsp_de.doc / K.-H. Seibel / Revision: 3 / 17.07.2007 Material Name: Material-Bezeichnung: Antiflutter, elastic Unterftterung, elastisch Application: Verwendung: Low strength metal to metal adhesive (e.g. roof bow/roof) used without precur

    3、ing at the body shop, if in case of a large gap and danger of dents a high expanding and elastic material is necessary. Niedrigfeste Metallverklebungen (z.B. Dachspriegel/Dach) im Rohbau ohne Vorgelierung, wenn aufgrund groer Spaltmae und einzugsgefhrdeter Flchen ein stark expandierendes und elastis

    4、ches Material bentigt wird. General Description: Allgemeine Beschreibung: Solvent free, high viscosity adhesive on caoutchuc basis; heat hardening. Lsungsmittelfreier, hochviskoser Klebstoff auf Kautschukbasis; wrmehrtend. Requirements Anforderungen 1 Requirements on Delivery 1 Anforderungen bei der

    5、 Anlieferung 1.1 Odour : neutral, not unpleasant 1.1 Geruch : neutral, nicht unangenehm 1.2 Density (DIN 51 757) at +23C kg/dm: see technical datasheet 1.2 Dichte (DIN 51 757) bei +23C kg/dm: siehe Technisches Datenblatt 1.3 Viscosity Flowmeter (SAEJ1524) temperature: +40C nozzle : 4 mm pressure: 2.

    6、8 bar outlet: 20 g s: 4525 1.3 Viskositt Flowmeter (SAEJ1524) Temperatur: +40C Dse : 4 mm Druck: 2,8 bar Auslauf: 20 g s: 4525 1.4 Volatile contents (GMW 3016) 1.4 Flchtige Anteile (GMW 3016) 1.4.1 after normal curing acc. to item 2.10.2 and 2h/+23C5K % by mass: 1.5 max. 1.4.1 nach Normal- aushrtung

    7、 lt. Pkt. 2.10.2 und 2h/+23C5K Massen-%: max. 1,5 1.5 Storage stability after receipt of material at +23C months: 3 min. 1.5 Lagerstabilitt nach Material-eingang bei +23C Monate: min. 3 Number/Nummer:L 000 0737 GME MATERIAL SPECIFICATION Group/Gruppe: G Materials Page/Seite: 2 of/von 9 Engineering F

    8、irst Issue (English): 24-SE-2008 Erstausgabe (Deutsch): 24-SE-200revised/ berarbeitet Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter Matsp_de.doc / K.-H. Seibel / Revision: 3 / 17.07.2007

    9、2 Processing Requirements 2 Anforderungen bei der Verwendung Remarc: Hinweis: - Application areas acc. to item 2.5 - Applikationsflchen lt. Pkt. 2.5 - Test piece preparation acc. to GMW 15477 for following tests: - 2.6 unconstrained - 2.9.1 unconstrained and constrained For panel configuration, mate

    10、rialdimensions and bonding gaps see table A1 1)a) and figure 1 - Probekrperherstellung lt. GMW 15477 fr folgende Prfungen: - 2.6 offene Raupe - 2.9.1 offene Raupe und Raupe im Sandwich Fr Blechaufbau, Materialabmessung und Blechabstand siehe Tabelle A1 1)a) und Abbildung 12.1 Homogenity : no sedimen

    11、ta-tion or levitation, no inclusions 2.1 Homogenitt : kein Absetzen oder Aufschwim-men, keine Einschlsse 2.2 Processing temperature C: +30 to +40 2.2 Verarbeitungs-temperatur C: +30 bis +40 2.3 Kind of application : robot and manual application 2.3 Applikationsart : Roboter- und Handapplikation 2.4

    12、Viscosity increase : none 2.4 Viskosittszunahme : keine 2.5 Application areas oiling max. 3 g/m with B 040 1270 B 040 1271 B 040 2001 and B 040 1269 2.5 Applikationsflchen Belung max. 3 g/m mit B 040 1270, B 040 1271 B 040 2001 und B 040 1269 2.5.1 : uncoated sheet GMW 2 2.5.1 : unbesch. Blech GMW 2

    13、 2.5.2 : precoated sheetGMW 11 EG N 2.5.2 : vorbesch. Blech GMW 11 EG N 2.5.3 : precoated sheetGMW 11 EG G 2.5.3 : vorbesch. Blech GMW 11 EG G 2.5.4 : precoated sheet GMW 8 HD G 2.5.4 : vorbesch. Blech GMW 8 HD G 2.5.5 : thin organic precoating GMW 15056 2.5.5 : organische Dnnfilm- Vorbeschichtung G

    14、MW 15056 Number/Nummer:L 000 0737 GME MATERIAL SPECIFICATION Group/Gruppe: G Materials Page/Seite: 3 of/von 9 Engineering First Issue (English): 24-SE-2008 Erstausgabe (Deutsch): 24-SE-200revised/ berarbeitet Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept

    15、. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter Matsp_de.doc / K.-H. Seibel / Revision: 3 / 17.07.2007 2.5.6 : aluminum, GMW 15192 2.5.6 : Aluminium, GMW 15192 2.6 Sag and slide test on vertical sheet metal and horizontal sheet metal (adhesive bead hangs from the sheet metal) bas

    16、ed on (GMW 3025) bead 6-8 mm 2.6 Standvermgen auf senkrechtem Blech und horizontalem Blech (Klebstoffraupe hngt vom Blech) in Anlehnung an (GMW 3025) Raupe 6-8 mm 2.6.1 after minimum curing acc. to item 2.10.1 and 2h/+23C5K : no sagging or sliding, no dripping off 2.6.1 nach Minimal- aushrtung lt. P

    17、kt. 2.10.1 und 2h/+23C5K : kein Ablaufen oder Abrutschen, kein Abtropfen 2.6.2 after overbaking acc. to item 2.10.3 and 2h/+23C5K : no sagging or sliding, no dripping off 2.6.2 nach berbrennung lt. Pkt. 2.10.3 und 2h/+23C5K : kein Ablaufen oder Abrutschen, kein Abtropfen 2.7 Maximum storage time at

    18、normal climate (+23C/50 % rel. air humidity) 2.7 Maximale Lagerzeit bei Normalklima (+23C/50 % rel. Luftfeuchtigkeit) 2.7.1 after application until assembly days: 5 2.7.1 nach Applikation bis Zusammenbau Tage: 5 2.7.2 after application and assembly weeks: 3 2.7.2 nach Applikation und Zusammenbau Woc

    19、hen: 3 2.8 Spot weldability (QT 001130) welding time: 8-10 periods welding voltage: new electrode 5.2 kA panel thickness: 0.8 mm panel quality: GMW 11 EG G E-power: 1700N : no impeding of the spot weld process 2.8 Punktschweibarkeit (QT 001130) Schweizeit 8-10 Perioden Schweistrom: neue Elektrode 5,

    20、2 kA Blechstrke: 0,8 mm Blechqualitt:GMW 11 EG G E-Kraft: 1700N : keine Behind- erung des Punktschwei- vorganges 2.9 Compatibility with painting process at ambient temperature 2.9 Vertrglichkeit mit Lackierproze bei Raumtemperatur 2.9.1 Washing outs (GME 60 434) : none 2.9.1 Auswaschverluste (GME 60

    21、 434) : keine 2.9.2 Process contamination : none 2.9.2 Prozekontaminierung : keine 2.9.3 Faults in Elpocoating (test method no. 18) : none 2.9.3 Strung der KTL-Beschichtung (Untersuchungs- methode Nr. 18) : keine Number/Nummer:L 000 0737 GME MATERIAL SPECIFICATION Group/Gruppe: G Materials Page/Seit

    22、e: 4 of/von 9 Engineering First Issue (English): 24-SE-2008 Erstausgabe (Deutsch): 24-SE-200revised/ berarbeitet Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter Matsp_de.doc / K.-H. Seibel

    23、/ Revision: 3 / 17.07.2007 2.10 Curing of adhesive (object temperature) 2.10 Klebstoffaushrtung (Objekttemperatur) 2.10.1 Minimum curing : 15min/+160C5K 2.10.1 Minimalaushrtung : 15min/+160C5K 2.10.2 Normal curing : 20min/+175C5K20min/+165C5K20min/+135C+5K 2.10.2 Normalaushrtung : 20min/+175C5K 20mi

    24、n/+165C5K 20min/+135C+5K 2.10.3 Overbaking : 60min/+190C5K 2.10.3 berbrennung : 60min/+190C5K 3 Requirements after Usage 3 Anforderungen nach der Verwendung Remarc: Hinweis: - Application areas acc. to item 2.5 - Applikationsflchen lt. Pkt. 2.5 - Test piece preparation acc. to GMW 15477 for followin

    25、g tests: - 3.6 unconstrained and constrained - 3.7 unconstrained - Probekrperherstellung lt. GMW 15477 fr folgende Prfungen: - 3.6 offene Raupe und Raupe im Sandwich - 3.7 offene Raupe For panel configuration, materialdimensions and bonding gaps see table A1 1)a) and figure 1 Fr Blechaufbau, Materia

    26、labmessung und Blechabstand siehe Tabelle A1 1)a) und Abbildung 1- for following tests the test pieces have to be elpo-coated: GMW 3286, GMW 14124 U - fr folgende Prfungen mssen die Probekrper KTL-beschichtet sein: GMW 3286, GMW 14124 U 3.1 Odour 3.1 Geruch 3.1.1 after normal curing acc. to item 2.1

    27、0.2 and 2h/+23C5 K : neutral, not unpleasant 3.1.1 nach Normalaus-hrtung lt. Pkt. 2.10.2 und 2h/+23C5K : normal, nicht unangenehm 3.2 Structure bead 6-8 mm 3.2 Struktur Raupe 6-8 mm 3.2.1 after minimum curing acc. to item 2.10.1 and 2h/+23C5 K : homogeneous 3.2.1 nach Minimal- aushrtung lt Pkt. 2.10

    28、.1 und 2h/+23C5K : homogen 3.2.2 after overbaking acc. to item 2.10.3 and 2h/+23C5 K : homogeneous 3.2.2 nach berbrennung lt. Pkt. 2.10.3 und 2h/+23C5K : homogen Number/Nummer:L 000 0737 GME MATERIAL SPECIFICATION Group/Gruppe: G Materials Page/Seite: 5 of/von 9 Engineering First Issue (English): 24

    29、-SE-2008 Erstausgabe (Deutsch): 24-SE-200revised/ berarbeitet Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter Matsp_de.doc / K.-H. Seibel / Revision: 3 / 17.07.2007 3.3 Expansion degree (GM

    30、W 15481) 3.3 Expansionsgrad (GMW 15481) 3.3.1 after minimum curing acc. to item 2.10.1 and 2h/+23C5K vol-%: 175 15 3.3.1 nach Minimal- aushrtung lt. Pkt. 2.10.1 und 2h/+23C5K Vol-%: 175 15 3.3.2 after overbaking acc. to item 2.10.3 and 2h/+23C5 K vol-%: 220 30 3.3.2 nach berbrennung lt. Pkt. 2.10.3

    31、und 2h/+23C5K Vol-%: 220 30 3.4 Shore 00 (ASTM D2240) 3.4 Shore 00 (ASTM D2240) 3.4.1 after minimum curing acc. to item 2.10.1 and 2h/+23C5K : 5515 3.4.1 nach Minimal- aushrtung lt. Pkt. 2.10.1 und 2h/+23C5K : 5515 3.4.2 after overbaking acc. to item 2.10.3 and 2h/+23C5 K : 5515 3.4.2 nach berbrennu

    32、ng lt. Pkt. 2.10.3 und 2h/+23C5K : 5515 3.5 pH-value (test method TEZ 6514LAB108) pH: 9 2 3.5 pH-Wert (Prfanweisung TEZ 6514LAB108) pH: 9 2 3.6 Adhesion (GMW 14706) 3.6 Haftung (GMW 14706) 3.6.1 after minimum curing acc. to item 2.10.1 and 2h/+23C5K failure mode: cohesive failure 3.6.1 nach Minimal-

    33、aushrtung lt. Pkt. 2.10.1 und 2h/+23C5K Bruchbild: Kohsionsbruch 3.6.2 after overbaking acc. to item 2.10.3 and 2h/+23C5K failure mode: cohesive failure 3.6.2 nach berbrennung lt. Pkt. 2.10.3 und 2h/+23C5K Bruchbild: Kohsionsbruch Number/Nummer:L 000 0737 GME MATERIAL SPECIFICATION Group/Gruppe: G M

    34、aterials Page/Seite: 6 of/von 9 Engineering First Issue (English): 24-SE-2008 Erstausgabe (Deutsch): 24-SE-200revised/ berarbeitet Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter Matsp_de.d

    35、oc / K.-H. Seibel / Revision: 3 / 17.07.2007 3.6.3 after minimum curing acc. to item 2.10.1 and 2h/+23C5K and salt spray test (GMW 3286) failure mode: cohesive failure 3.6.3 nach Minimal-aushrtung lt. Pkt. 2.10.1 und 2h/+23C5K und Salzsprh-nebelprfung (GMW 3286) Bruchbild: Kohsionsbruch 3.6.4 after

    36、overbaking acc. to item 2.10.3 and 2h/+23C5K and salt spray test (GMW 3286) failure mode: cohesive failure 3.6.4 nach berbrennung lt. Pkt. 2.10.3 und 2h/+23C5K und Salzsprh-nebelprfung (GMW 3286) Bruchbild: Kohsionsbruch 3.6.5 after minimum curing acc. to item 2.10.1 and 2h/+23C5K and determination

    37、of the resistance to corrosion under cyclic alternating conditions (GMW 14124 U) failure mode: cohesive failure 3.6.5 nach Minimal-aushrtung lt. Pkt. 2.10.1 und 2h/+23C5K und Korrosions-schutzprfung von organischen Beschichtungen bei zyklisch wechselnder Beanspuchung (GMW 14124 U) Bruchbild: Kohsion

    38、sbruch 3.6.6 after overbaking acc. to item 2.10.3 and 2h/+23C5K and determination of the resistance to corrosion under cyclic alternating conditions (GMW 14124 U) failure mode: cohesive failure 3.6.6 nach berbrennung lt. Pkt. 2.10.3 und 2h/+23C5K und Korrosions-schutzprfung von organischen Beschicht

    39、ungen bei zyklisch wechselnder Beanspruchung (GMW 14124 U) Bruchbild: Kohsionsbruch 3.6.7 after minimum curing acc. to item 2.10.1 and 2h/+23C5K and aging (120h/+80C) and 2h/+23C5K failure mode: cohesive failure 3.6.7 nach Minimal-aushrtung lt. Pkt. 2.10.1 und 2h/+23C5K und Alterung (120h/+80C) und

    40、2h/+23C5K Bruchbild: Kohsionsbruch Number/Nummer:L 000 0737 GME MATERIAL SPECIFICATION Group/Gruppe: G Materials Page/Seite: 7 of/von 9 Engineering First Issue (English): 24-SE-2008 Erstausgabe (Deutsch): 24-SE-200revised/ berarbeitet Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/

    41、Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter Matsp_de.doc / K.-H. Seibel / Revision: 3 / 17.07.2007 3.6.8 after overbaking acc. to item 2.10.3 and 2h/+23C5K and aging (120h/+80C) and 2h/+23C5K failure mode: cohesive failure 3.6.8 nach berbrennung lt.

    42、Pkt. 2.10.3 und 2h/+23C5K und Alterung (120h/+80C) und 2h/+23C5K Bruchbild: Kohsionsbruch 3.6.9 after minimum curing acc. to item 2.10.1 and 2h/+23C5K and aging (120h/+80C) test temperature: +80C3K failure mode: cohesive failure 3.6.9 nach Minimal-aushrtung lt. Pkt. 2.10.1 und 2h/+23C5K und Alterung

    43、 (120h/+80C) Prftemperatur: +80C3K Bruchbild: Kohsionsbruch 3.6.10 after overbaking acc. to item 2.10.3 and 2h/+23C5K and aging (120h/+80C) test temperature: +80C3K failure mode: cohesive failure 3.6.10 nach berbrennung lt. Pkt. 2.10.3 und 2h/+23C5K und Alterung (120h/+80C) Prftemperatur: +80C3K Bru

    44、chbild: Kohsionsbruch 3.6.11 after minimum curing acc. to item 2.10.1 and 2h/+23C5K and cold aging (24h/-30C5K) test temperature: -30C3K failure mode: cohesive failure 3.6.11 nach Minimal- aushrtung lt. Pkt. 2.10.1 und 2h/+23C5K und Kltealterung (24h/-30C5K) Prftemperatur: -30C3K Bruchbild: Kohsions

    45、bruch 3.6.12 after overbaking acc. to item 2.10.3 and 2h/+23C5K and cold aging (24h/-30C5K) test temperature: -30C3K failure mode: cohesive failure 3.6.12 nach berbrennung lt. Pkt. 2.10.3 und 2h/+23C5K und Kltealterung (24h/-30C5K) Prftemperatur: -30C3K Bruchbild: Kohsionsbruch Number/Nummer:L 000 0

    46、737 GME MATERIAL SPECIFICATION Group/Gruppe: G Materials Page/Seite: 8 of/von 9 Engineering First Issue (English): 24-SE-2008 Erstausgabe (Deutsch): 24-SE-200revised/ berarbeitet Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbear

    47、beiter Gruppenleiter Abteilungsleiter Matsp_de.doc / K.-H. Seibel / Revision: 3 / 17.07.2007 3.7 Water resistance/water absorption (test method TEZ6514LAB109) bead 6-8 mm 3.7 Wasserbestndigkeit/Wasseraufnahme (Prfanweisung TEZ6514LAB109) Raupe 6-8 mm 3.7.1 after minimum curing acc. to item 2.10.1 an

    48、d 2h/+23C5K % by mass: 1 max. 3.7.1 nach Minimal-aushrtung lt. Pkt. 2.10.1 und 2h/+23C5K Massen-%: max. 1 3.7.2 after overbaking acc. to item 2.10.3 and 2h/+23C5K % by mass: 1 max. 3.7.2 nach berbrennung lt. Pkt. 2.10.3 und 2h/+23C5K Massen-%: max. 1 3.8 Compatibility with released Cavity Wax L 000 0127/L 000 0131 Application of 5- 20 g of cavitiy wax to be tested (dry film thickness approx. 50 m) onto the expanded adhesive (In case of a solvent-free, respectively 100% solids content cavity wax, curing acc. to L 000 0131). Age panel 120h at +80C3K and 2h/+23C5K 3.8 Vertr


    注意事项

    本文(GME L 000 0737-2008 Antiflutter elastic (English German).pdf)为本站会员(eastlab115)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开