欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    GME L 000 0728-2004 Structural adhesive impact resistant (English German).pdf

    • 资源ID:755628       资源大小:123.76KB        全文页数:11页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    GME L 000 0728-2004 Structural adhesive impact resistant (English German).pdf

    1、 Number/Nummer:L 000 0728 ITDC ME MATERIAL SPECIFICATION Group/Gruppe: G Paint and Page/Seite: 1 of/von 11 Corrosion Protection First Issue (English): 05-FE-2004 Erstausgabe (Deutsch): 05-FE-2004 Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderu

    2、ng Datum Sachbearbeiter Gruppenleiter Abteilungsleiter MATSP_DE.doc / Revision: 2 24.01.2003 / K.-H. Seibel Material Name: Material-Bezeichnung: Structural adhesive, impact resistant Strukturklebstoff, schlagzh Application: Verwendung: For bonding overlapped connections like hem flanges, as well as

    3、overlapped connections in combination with spot welding, who require high demands to shear resistance especially to impact peel (crash) strain. Zur Verklebung von berlappenden Verbindungen wie Brdelflanschen, sowie von berlappenden Verbindungen in Kombination mit Punktschweien, die hohe Anforderunge

    4、n an Scherfestigkeiten, insbesondere an Schlag-Schl (Crash) Belastungen stellen General Description: Allgemeine Beschreibung: Warm pumpable, solvent-free, 1-component epoxy-based adhesive; thermosetting. Warmverpumpbarer, lsungsmittelfreier, 1-K epoxid basierender Klebstoff, wrmehrtend. Requirements

    5、 Anforderungen 1 Requirements on Delivery 1 Anforderungen bei der Anlieferung 1.1 Density (DIN 51 757) at +23C kg/dm: 1.2 0,05 1.1 Dichte (DIN 51 757) bei +23C kg/dm: 1,2 0,05 1.2 Viscosity (GME 14 017) Flowmeter at +60C, nozzle: 4.0 mm pressure: 1.4 bar s: 6010 1.2 Viskositt (GME 14 017) Flowmeter

    6、bei +60C, Dse 4,0 mm Druck 1,4 bar s: 6010 1.3 Volatile contents (GMW 3016) 1.3 Flchtige Anteile (GMW 3016) 1.3.1 after minimum curing acc. to item 2.11.1 and 2h/+23C5K % by mass: 1 max. 1.3.1 nach Minimal- aushrtung lt. Pkt. 2.11.1 und 2h/+23C5K Massen-%: max. 1 1.3.2 after overbaking acc. to item

    7、2.11.3 and 2h/+23C5K % by mass: 1 max. 1.3.2 nach berbrennung lt. Pkt. 2.11.3 und 2h/+23C5K Massen-%: max. 1 1.4 Storage stability after receipt of material at +23C months: 3 min. 1.4 Lagerstabilitt nach Material-eingang bei +23C Monate: min. 3 Number/Nummer:L 000 0728 ITDC ME MATERIAL SPECIFICATION

    8、 Group/Gruppe: G Paint and Page/Seite: 2 of/von 11 Corrosion Protection First Issue (English): 05-FE-2004 Erstausgabe (Deutsch): 05-FE-2004 Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter M

    9、ATSP_DE.doc / Revision: 2 24.01.2003 / K.-H. Seibel 2 Processing Requirements 2 Anforderungen bei der Verwendung 2.1 Homogenity : no sedimenta-tion or levitation, no inclusions 2.1 Homogenitt : kein Absetzen oder Aufschwim-men, keine Einschlsse 2.2 Processing temperature C: +30 +55 2.2 Verarbeitungs

    10、-temperatur C: +30 +55 2.3 Kind of application : robot and manual application 2.3 Applikationsart : Roboter- und Handapplika- tion 2.4 Viscosity increase : none 2.4 Viskosittszunahme : keine 2.5 Application areas oiling max. 3 g/m with B 040 1270 B 040 1271 and B 040 2001 2.5 Applikationsflchen Belu

    11、ng max. 3 g/m mit B 040 1270, B 040 1271 und B 040 2001 2.5.1 : precoated sheet GMW 11 EG G 2.5.1 : vorbesch. Blech GMW 11 EG G 2.5.2 : precoated sheet GMW 8 HD G 2.5.2 : vorbesch. Blech GMW 8 HD G 2.5.3 : thin organic precoating GME 8721 2.5.3 : organische Dnnfilm-Vorbeschichtung GME 8721 2.6 Sag a

    12、nd slide test on vertical sheet metal (GMW 3025) application areas acc. to item 2.5, bead 2-3 mm 2.6 Standvermgen auf senkrechtem Blech(GMW 3025) Applikationsflchen lt. Pkt. 2.5, Raupe 2-3 mm 2.6.1 after minimum curing acc. to item 2.11.1 and 2h/+23C5K : no sagging or sliding 2.6.1 nach Minimal- aus

    13、hrtung lt. Pkt. 2.11.1 und 2h/+23C5K : kein Ablaufen oder Abrutschen 2.6.2 after overbaking acc. to item 2.11.3 and 2h/+23C5K : no sagging or sliding 2.6.2 nach berbrennung lt. Pkt. 2.11.3 und 2h/+23C5K : kein Ablaufen oder Abrutschen Number/Nummer:L 000 0728 ITDC ME MATERIAL SPECIFICATION Group/Gru

    14、ppe: G Paint and Page/Seite: 3 of/von 11 Corrosion Protection First Issue (English): 05-FE-2004 Erstausgabe (Deutsch): 05-FE-2004 Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter MATSP_DE.do

    15、c / Revision: 2 24.01.2003 / K.-H. Seibel 2.7 Maximum storage time at normal climate (+23C/50 % rel. air humidity) 2.7 Maximale Lagerzeit bei Normalklima (+23C/50 % rel. Luftfeuchtigkeit) 2.7.1 after application until assembly days: 4 2.7.1 nach Applikation bis Zusammenbau Tage: 4 2.7.2 after applic

    16、ation and assembly weeks: 4 2.7.2 nach Applikation und Zusammenbau Wochen: 4 2.8 Spot weldability (QT 001130) welding time: 8-10 periods welding voltage: new electrode 5.2 kA panel thickness: 0.8 mm panel quality: GMW 11 EG G E-power: 1700N : no impeding of the spot weld process 2.8 Punktschweibarke

    17、it (QT 001130) Schweizeit 8-10 Perioden Schweistrom: neue Elektrode 5,2 kA Blechstrke: 0,8 mm Blechqualitt:GMW 11 EG G E-Kraft: 1700N : keine Behind- erung des Punktschwei- vorganges 2.9 Penetration (ASTM D 5) at +23C, 20 g, 5 s 2.9 Penetration (ASTM D 5) bei +23C, 20 g, 5 s 2.9.1 after application

    18、0.1 mm: 1710 2.9.1 nach Applikation 0,1 mm: 1710 2.9.2 after 5 days 0.1 mm: 1710 2.9.2 nach 5 Tagen 0,1 mm: 1710 2.10 Compatibility with painting process after cooling-off application areas acc. to item 2.5 2.10 Vertrglichkeit mit Lackierproze nach Abkhlung Applikationsflchen lt. Pkt. 2.5 2.10.1 Was

    19、hing outs : none 2.10.1 Auswaschverluste : keine 2.10.2 Bath contamination : none 2.10.2 Badkontaminierung : keine 2.10.3 Faults in Elpocoating (test method no. 18) : none 2.10.3 Strung der KTL-Beschichtung (Untersuchungs- methode Nr. 18) : keine 2.11 Curing of adhesive (object temperature) 2.11 Kle

    20、bstoffaushrtung (Objekttemperatur) 2.11.1 Minimum curing : 20min/+170C5K 2.11.1 Minimalaushrtung : 20min/+170C5K 2.11.2 Normal curing : 20min/+175C5K20min/+165C5K20min/+135C+5K 2.11.2 Normalaushrtung : 20min/+175C5K 20min/+165C5K 20min/+135C+5K 2.11.3 Overbaking : 60min/+190C5K 2.11.3 berbrennung :

    21、60min/+190C5K Number/Nummer:L 000 0728 ITDC ME MATERIAL SPECIFICATION Group/Gruppe: G Paint and Page/Seite: 4 of/von 11 Corrosion Protection First Issue (English): 05-FE-2004 Erstausgabe (Deutsch): 05-FE-2004 Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept

    22、. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter MATSP_DE.doc / Revision: 2 24.01.2003 / K.-H. Seibel 3 Requirements after Usage 3 Anforderungen nach der Verwendung 3.1 Structure bead 2-3 mm 3.1 Struktur Raupe 2-3 mm 3.1.1 after minimum curing acc. to item 2.11.1 and 2h/+23C5 K :

    23、homogeneous 3.1.1 nach Minimal- aushrtung lt Pkt. 2.11.1 und 2h/+23C5K : homogen 3.1.2 after overbaking acc. to item 2.11.3 and 2h/+23C5 K : homogeneous 3.1.2 nach berbrennung lt. Pkt. 2.11.3 und 2h/+23C5K : homogen 3.2 Expansion degree (GME 60 436) 3.2 Expansionsgrad (GME 60 436) 3.2.1 after minimu

    24、m curing acc. to item 2.11.1 and 2h/+23C5K vol-%: 1 max. 3.2.1 nach Minimal- aushrtung lt. Pkt. 2.11.1 und 2h/+23C5K Vol-%: max. 1 3.2.2 after overbaking acc. to item 2.11.3 and 2h/+23C5 K vol-%: 1 max. 3.2.2 nach berbrennung lt. Pkt. 2.11.3 und 2h/+23C5K Vol-%: max. 1 3.3 pH-value (test method TEZ

    25、6514LAB108) pH: 9 2 3.3 pH-Wert (Prfanweisung TEZ 6514LAB108) pH: 9 2 3.4 Potential difference (GMI 60 459) mV: 10 3.4 Potential-differenz (GMI 60 459) mV: 10 Number/Nummer:L 000 0728 ITDC ME MATERIAL SPECIFICATION Group/Gruppe: G Paint and Page/Seite: 5 of/von 11 Corrosion Protection First Issue (E

    26、nglish): 05-FE-2004 Erstausgabe (Deutsch): 05-FE-2004 Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter MATSP_DE.doc / Revision: 2 24.01.2003 / K.-H. Seibel 3.5 Adhesion based on GME 60 433,

    27、on application areas acc. to item 2.5, bead 2-3 mm 3.5 Haftung in Anlehnung an GME 60 433, auf Applikations- flchen lt. Pkt. 2.5, Raupe 2-3 mm 3.5.1 after minimum curing acc. to item 2.11.1 and 2h/+23C5K failure mode: cohesive failure 3.5.1 nach Minimal-aushrtung lt. Pkt. 2.11.1 und 2h/+23C5K Bruchb

    28、ild: Kohsionsbruch 3.5.2 after overbaking acc. to item 2.11.3 and 2h/+23C5K failure mode: cohesive failure 3.5.2 nach berbrennung lt. Pkt. 2.11.3 und 2h/+23C5K Bruchbild: Kohsionsbruch 3.5.3 after normal curing acc. to item 2.11.2,welded (test samples 150x20mm, distance of welding spots: approx. 30

    29、mm) with Elpo-coating and 2h/+23C5K and salt spray test (GMI 60 206 R) failure mode: cohesive failure 3.5.3 nach Normal-aushrtung lt. Pkt. 2.11.2, geschweit (Probekrper 150x20mm, Schweipunkt- abstand: ca. 30 mm) mit KTL-Beschichtung und 2h/+23C5K und Salzsprh-nebelprfung (GMI 60 206 R) Bruchbild: Ko

    30、hsionsbruch 3.5.4 after normal curing acc. to item 2.11.2 with Elpo-coating and 2h/+23C5K and high humidity test (GME 60 202 D6) failure mode: cohesive failure 3.5.4 nach Normal-aushrtung lt. Pkt. 2.11.2, mit KTL-Beschichtung und 2h/+23C5K und Kondens- wasserklima- prfung (GME 60 202 D6) Bruchbild:

    31、Kohsionsbruch Number/Nummer:L 000 0728 ITDC ME MATERIAL SPECIFICATION Group/Gruppe: G Paint and Page/Seite: 6 of/von 11 Corrosion Protection First Issue (English): 05-FE-2004 Erstausgabe (Deutsch): 05-FE-2004 Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept

    32、. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter MATSP_DE.doc / Revision: 2 24.01.2003 / K.-H. Seibel 3.5.5 after normal curing acc. to item 2.11.2 with Elpo-coating and 2h/+23C5K and aging (120h/+80C) and 2h/+23C5K failure mode: cohesive failure 3.5.5 nach Normal-aushrtung lt. Pk

    33、t. 2.11.2 mit KTL-Beschichtung und 2h/+23C5K und Alterung (120h/+80C) und 2h/+23C5K Bruchbild: Kohsionsbruch 3.5.6 after normal curing acc. to item 2.11.2 with Elpo-coating and 2h/+23C5K and aging (120h/+80C) test temperature: +80C3K failure mode: cohesive failure 3.5.6 nach Normal-aushrtung lt. Pkt

    34、. 2.11.2 mit KTL-Beschichtung und 2h/+23C5K und Alterung (120h/+80C) Prftemperatur: +80C3K Bruchbild: Kohsionsbruch 3.5.7 after normal curing acc. to item 2.11.2 with Elpo-coating and 2h/+23C5K and cold aging (24h/-30C5K) test temperature: -30C3K failure mode : cohesive failure 3.5.7 nach Normal- au

    35、shrtung lt. Pkt. 2.11.2 mit KTL-Beschichtung und 2h/+23C5K und Kltealterung (24h/-30C5K) Prftemperatur: -30C3K Bruchbild: Kohsionsbruch 3.6 Corrosion resistance/salt spray test (GMI 60 206 R) application areas acc. to item 2.5, bead 2-3 mm, with Elpo-coating 3.6 Korrosionsbestndigkeit/Salzsprhtest (

    36、GMI 60 206 R) Applikationsflchen lt. Pkt. 2.5, Raupe 2-3 mm, mit KTL-Beschichtung 3.6.1 after minimum curing acc. to item 2.11.1 and 2h/+23C5K : grade 1 3.6.1 nach Minimal-aushrtung lt. pkt. 2.11.1 und 2h/+23C5K : Stufe 1 3.6.2 after overbaking, acc. to item 2.11.3 and 2h/+23C5K : grade 1 3.6.2 nach

    37、 berbrennung, lt. Pkt. 2.11.3 und 2h/+23C5K : Stufe 1 Number/Nummer:L 000 0728 ITDC ME MATERIAL SPECIFICATION Group/Gruppe: G Paint and Page/Seite: 7 of/von 11 Corrosion Protection First Issue (English): 05-FE-2004 Erstausgabe (Deutsch): 05-FE-2004 Caroline Grittner Otmar Egner Gerald Badersbach Alt

    38、eration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter MATSP_DE.doc / Revision: 2 24.01.2003 / K.-H. Seibel 3.7 High humidity test (GME 60 202 D6) application areas acc. to item 2.5, bead 2-3 mm, with Elpo-coating 3.7 Kondenswasserklimaprfung (GME

    39、 60 202 D6) Applikationsflchen lt. Pkt. 2.5, Raupe 2-3 mm, mit KTL-Beschichtung 3.7.1 after minimum curing acc. to item 2.11.1 and 2h/+23C5K : grade 1 3.7.1 nach Minimal- aushrtung lt. Pkt. 2.11.1 und 2h/+23C5K : Stufe 1 3.7.2 after overbaking acc. to item 2.11.3 and 2h/+23C5K : grade 1 3.7.2 nach b

    40、erbrennung lt. Pkt. 2.11.3 und 2h/+23C5K : Stufe 1 3.8 Cold mandrel-bend-test based on GMW 3154 application areas acc. to item 2.5, bead 2-3 mm, with Elpo-coating, test temperature: -30C3K 3.8 Klte-Biege-Prfung in Anlehnung an GMW 3154 Applikationsflchen lt. Pkt. 2.5, Raupe 2-3 mm, mit KTL-Beschicht

    41、ung, Prftemperatur: -30C3K 3.8.1 after minimum curing acc. to item 2.11.1 and 2h/+23C5K : no chipping off 3.8.1 nach Minimal- aushrtung lt. Pkt. 2.11.1 und 2h/+23C5K : kein Abplatzen 3.8.2 after overbaking acc. to item 2.11.3 and 2h/+23C5K : no chipping off 3.8.2 nach berbrennung lt. Pkt. 2.11.3 und

    42、 2h/+23C5K : kein Abplatzen 3.9 Water resistance/water absorption (test method TEZ6514LAB109) bead 2-3 mm 3.9 Wasserbestndigkeit/Wasseraufnahme (Prfanweisung TEZ6514LAB109) Raupe 2-3 mm 3.9.1 after minimum curing acc. to item 2.11.1 and 2h/+23C5K % by mass: 1 max. 3.9.1 nach Minimal-aushrtung lt. Pk

    43、t. 2.11.1 und 2h/+23C5K Massen%: max. 1 3.9.2 after overbaking acc. to item 2.11.3 and 2h/+23C5K % by mass: 1 max. 3.9.2 nach berbrennung lt. Pkt. 2.11.3 und 2h/+23C5K Massen-%: max. 1 Number/Nummer:L 000 0728 ITDC ME MATERIAL SPECIFICATION Group/Gruppe: G Paint and Page/Seite: 8 of/von 11 Corrosion

    44、 Protection First Issue (English): 05-FE-2004 Erstausgabe (Deutsch): 05-FE-2004 Caroline Grittner Otmar Egner Gerald Badersbach Alteration Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Sachbearbeiter Gruppenleiter Abteilungsleiter MATSP_DE.doc / Revision: 2 24.01.2003 / K.-H. Seibel 3.10 Com

    45、bined tension and shear resistance (GME 60 432) application areas acc. to item 2.5, adhesive gap 0.1-0.2mm 3.10 Zugscherfestigkeiten (GME 60 432) Applikationsflchen lt. Pkt. 2.5, Klebefuge 0,1-0,2mm 3.10.1 after minimum curing acc. to item 2.11.1 and 2h/+23C5K mPa: 16.0 min. 3.10.1 nach Minimal-aush

    46、rtung lt. Pkt. 2.11.1 und 2h/+23C5K MPa: min. 16,0 3.10.2 after overbaking acc. to item 2.11.3 and 2h/+23C5K mPa: 16.0 min. 3.10.2 nach berbrennung lt. Pkt. 2.11.3 und 2h/+23C5K MPa: min. 16,0 3.10.3 after normal curing acc. to item 2.11.2 and 2h/+23C5K and cold aging (24h/-30C5K) tensile shear stre

    47、ngth test at 30C, in case that technical require-ments are not given tensile shear strength test at 15C is permitted in deviation mPa: 16.0 min. 3.10.3 nach Normal-aushrtung lt. Pkt. 2.11.2 und 2h/+23C5K und Kltealterung (24h/-30C5K) Zugscherprfung bei 30C , falls die technischen Voraus-setzungen ni

    48、cht ge-geben sind ist eine Zugscherprfung bei 15C in Abweichung zulssig MPa: min. 16,0 3.10.4 after normal curing acc. to item 2.11.2 and 2h/+23C5K and aging (120h/+80C5K) and 2h/+23C5K mPa: 16.0 min. 3.10.4 nach Normal-aushrtung lt. Pkt. 2.11.2 und 2h/+23C5K und Alterung (120h/+80C5K) und 2h/+23C5K MPa: min. 16,0 3.10.5 after normal curing acc. to item 2.11.2 and 2h/+23C5K and Aging (120h/+80C5K) test temperature: +80C3K mPa: 16.0 min. 3.10.5 nach Normal-aushrtung lt. Pkt. 2.11.2 und 2h/+23C5K und Alterung (120 h/+80C5K) Prftemperatur: +80C


    注意事项

    本文(GME L 000 0728-2004 Structural adhesive impact resistant (English German).pdf)为本站会员(eastlab115)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开