欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    GME L 000 0588-2017 Pillar Filler (English German).pdf

    • 资源ID:755610       资源大小:153.91KB        全文页数:10页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    GME L 000 0588-2017 Pillar Filler (English German).pdf

    1、 Number/Nummer: L 000 0588 GME ME MATERIAL SPECIFICATION Group/Gruppe: N Paint, Polymers Page/Seite: 1 of/von 10 & Automation First Issue (English): 10-OC-2003 Erstausgabe (Deutsch): 10-OC-2003 02-FE-2017 A. Plsterl A. Paletschek I. Menke-Hermani Alteration/ Date/ Author/ Group Leader/ Dept. Head/ n

    2、derung Datum Autor Gruppenleiter Abteilungsleiter PPA_Material_Specification.docx / Revision: 7 / 01.11.2016 Material Name: Material-Bezeichnung: Pillar Filler Hohlraumabschottung Application: Verwendung: For reduction of noise and sealing of body expandable moulded parts are mounted into cavities i

    3、n body in white which expand in Elpo-oven to their final shape. Zur Geruschreduzierung und Abdichtung des Fahr-zeuginnenraumes werden im Rohbau expandierfhige Formteile in Hohlrume eingelegt, die im KTL-Ofen auf-schumen. General Description: Allgemeine Beschreibung: Expandable moulded parts, thermos

    4、etting. Expandierfhige Formteile, wrmehrtend. Requirements Anforderungen 1 Requirements on Delivery 1 Anforderungen bei der Anlieferung 1.1 Density (DIN 53479) 1.00 0.10 kg/dm (at 23C) 1.1 Dichte (DIN 53479) 1,00 0,10 kg/dm (bei 23C) 1.2 Volatile contents (GMW 3016) 1.2 Flchtige Anteile (GMW 3016) 1

    5、.2.1 After minimum curing Acc. to item. 2.4.1 and 2 h at +23 C 5 K 2 % by mass 1.2.1 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K 2 Massen-% 1.2.2 After overbaking Acc. to item. 2.4.3 and 2 h at +23 C 5 K 2 % by mass 1.2.2 Nach berbrennung lt. Pkt. 2.4.3 und 2 h bei +23 C 5 K 2 Massen-

    6、% 1.3 Storage stability after receipt of material 6 months 1.3 Lagerstabilitt nach Materialeingang 6 Monate Number/Nummer: L 000 0588 GME ME MATERIAL SPECIFICATION Group/Gruppe: N Paint, Polymers Page/Seite: 2 of/von 10 & Automation First Issue (English): 10-OC-2003 Erstausgabe (Deutsch): 10-OC-2003

    7、 02-FE-2017 A. Plsterl A. Paletschek I. Menke-Hermani Alteration/ Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Autor Gruppenleiter Abteilungsleiter PPA_Material_Specification.docx / Revision: 7 / 01.11.2016 2 Processing Requirements 2 Anforderungen bei der Verwendung 2.1 Kind of application

    8、 The moulded part has to be fixed manual / automatic with holders, welding or similar processes into the body in white. Remarc: A circulating gap of 5 1 mm to body in white has to be given. 2.1 Applikationsart Das Formteil wird manuell / automatisch durch Klipsen, Schweien oder hnliche Verfahren in

    9、der Rohkarosse-rie befestigt. Hinweis: Zur Karosserie muss ein umlaufender Spalt von 5 1 mm gegeben sein. 2.2 Application areas Non cured ELPO leadfree grey (L 000 0422) Non cured ELPO, leadfree black (L 000 0424) 2.2 Applikationsflchen Nicht eingebrannte KTL bleifrei grau (L 000 0422) Nicht eingebr

    10、annte KTL, bleifrei schwarz (L 000 0424) 2.3 Compatibility with painting process Application areas acc. to item 2.2 2.3 Vertrglichkeit mit Lackierprozess Applikationsflchen lt. Pkt. 2.2 2.3.1 Washing outs (GMW16700 Method A) Test piece preparation acc. to GMW 15477 Figure A1 (Partially constrained,

    11、untacky) 2.3.1 Auswaschverluste (GMW16700 Methode A) Probekrperherstellung lt. GMW 15477 Figure A1 (Partially constrained, untacky) None Keine 2.3.2 Bath contamination None 2.3.2 Badkontaminierung Keine 2.3.3 Electrocoat compatibility The Electrocoat compatibility according to GMW16656 must be guara

    12、nteed. Subsequent spray paint application must not be ad-versely affected. 2.3.3 KTL Lackvertrglichkeit Die KTL Lackvertrglichkeit nach GMW16656 muss ge-geben sein. Nachfolgende Spritzlackierungen drfen nicht negativ beeinflusst werden. Number/Nummer: L 000 0588 GME ME MATERIAL SPECIFICATION Group/G

    13、ruppe: N Paint, Polymers Page/Seite: 3 of/von 10 & Automation First Issue (English): 10-OC-2003 Erstausgabe (Deutsch): 10-OC-2003 02-FE-2017 A. Plsterl A. Paletschek I. Menke-Hermani Alteration/ Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Autor Gruppenleiter Abteilungsleiter PPA_Material_S

    14、pecification.docx / Revision: 7 / 01.11.2016 2.4 Adhesive curing conditions 2.4 Klebstoffaushrtung 2.4.1 Minimum curing 2.4.1 Minimalaushrtung 15 min / +160 C 5 K 15 min / +160 C 5 K 2.4.2 Regular curing (object temperature) 2.4.2 Normalaushrtung (Objekttemperatur) 20 min / +175 C 5 K 20 min / +165

    15、C 5 K 20 min / +135 C + 5 K 20 min / +175 C 5 K 20 min / +165 C 5 K 20 min / +135 C + 5 K 2.4.3 Overbaking 2.4.3 berbrennung 60 min / +190 C 5 K 60 min / +190 C 5 K 3 Requirements after Usage 3 Anforderungen nach der Verwendung 3.1 Expansion factor (GMW 15481, Method 1) 3.1.1 After minimum curing Ac

    16、c. to item. 2.4.1 and 2 h at +23 C 5 K 300 Vol-% 3.1 Expansionsgrad (GMW 15481, Methode 1) 3.1.1 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K 300 Vol-% 3.1.2 After overbaking Acc. to item. 2.4.3 and 2 h at +23 C 5 K 300 Vol-% 3.1.2 Nach berbrennung lt. Pkt. 2.4.3 und 2 h bei +23 C 5 K

    17、300 Vol-% 3.2 Structure 3.2.1 After minimum curing Acc. to item. 2.4.1 and 2 h at +23 C 5 K Homogeneous, closed expanded 3.2 Struktur 3.2.1 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K Homogen, geschlossene Zellstruktur Number/Nummer: L 000 0588 GME ME MATERIAL SPECIFICATION Group/Grup

    18、pe: N Paint, Polymers Page/Seite: 4 of/von 10 & Automation First Issue (English): 10-OC-2003 Erstausgabe (Deutsch): 10-OC-2003 02-FE-2017 A. Plsterl A. Paletschek I. Menke-Hermani Alteration/ Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Autor Gruppenleiter Abteilungsleiter PPA_Material_Spec

    19、ification.docx / Revision: 7 / 01.11.2016 3.2.2 After overbaking Acc. to item. 2.4.3 and 2 h at +23 C 5 K Homogeneous, closed expanded 3.2.2 Nach berbrennung lt. Pkt. 2.4.3 und 2 h bei +23 C 5 K Homogen, geschlossene Zellstruktur 3.3 Adhesion (GMW 14706) Test piece preparation acc. to GMW 15477 Figu

    20、re A1 (Partially constrained, untacky) Application areas acc. to item 2.2 Strip approx. 150 x 20 x 2-3 mm 3.3.1 After minimum curing Acc. to item. 2.4.1 and 2 h at +23 C 5 K Failure mode: cohesive failure 3.3 Haftung (GMW 14706) Probekrperherstellung lt. GMW 15477 Figure A1 (Partially constrained, u

    21、ntacky) Applikationsflchen lt. Pkt. 2.2 Streifen ca. 150 x 20 x 2-3 mm 3.3.1 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K Bruchbild: Kohsionsbruch 3.3.2 After overbaking Acc. to item. 2.4.3 and 2 h at +23 C 5 K Failure mode: cohesive failure 3.3.2 Nach berbrennung lt. Pkt. 2.4.3 und 2

    22、h bei +23 C 5 K Bruchbild: Kohsionsbruch 3.3.3 After minimum curing Acc. to item. 2.4.1 and 2 h at +23 C 5 K and salt spray test (GMW 3286) Duration: 480 h + 24 h recovery at 23C Failure mode: cohesive failure 3.3.3 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K und Salzsprhtest (GMW 328

    23、6) Dauer: 480 h + 24 h Erholung bei 23C Bruchbild: Kohsionsbruch 3.3.4 After overbaking Acc. to item. 2.4.3 and 2 h at +23 C 5 K and salt spray test (GMW 3286) Duration: 480 h + 24 h recovery at 23C Failure mode: cohesive failure 3.3.4 Nach berbrennung lt. Pkt. 2.4.3 und 2 h bei +23 C 5 K und Salzsp

    24、rhtest (GMW 3286) Dauer: 480 h + 24 h Erholung bei 23C Bruchbild: Kohsionsbruch Number/Nummer: L 000 0588 GME ME MATERIAL SPECIFICATION Group/Gruppe: N Paint, Polymers Page/Seite: 5 of/von 10 & Automation First Issue (English): 10-OC-2003 Erstausgabe (Deutsch): 10-OC-2003 02-FE-2017 A. Plsterl A. Pa

    25、letschek I. Menke-Hermani Alteration/ Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Autor Gruppenleiter Abteilungsleiter PPA_Material_Specification.docx / Revision: 7 / 01.11.2016 3.3.5 After minimum curing Acc. to item. 2.4.1 and 2 h at +23 C 5 K and high humidity test (GMW 14729) Duration:

    26、 240 h + 24 h recovery at 23C Failure mode: cohesive failure 3.3.5 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K und Kondenswasserklimaprfung (GMW 14729) Dauer: 240 h + 24 h Erholung bei 23C Bruchbild: Kohsionsbruch 3.3.6 After overbaking Acc. to item. 2.4.3 and 2 h at +23 C 5 K and hig

    27、h humidity test (GMW 14729) Duration: 240 h + 24 h recovery at 23C Failure mode: cohesive failure 3.3.6 Nach berbrennung lt. Pkt. 2.4.3 und 2 h bei +23 C 5 K und Kondenswasserklimaprfung (GMW 14729) Dauer: 240 h + 24 h Erholung bei 23C Bruchbild: Kohsionsbruch 3.3.7 After minimum curing Acc. to item

    28、. 2.4.1 and 2 h at +23 C 5 K and aging (120 h / +80C) and 2 h at +23 C 5 K Failure mode: cohesive failure 3.3.7 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K und Alterung (120 h / +80C) und 2 h bei +23 C 5 K Bruchbild: Kohsionsbruch 3.3.8 After overbaking Acc. to item. 2.4.3 and 2 h at

    29、+23 C 5 K and aging (120 h / +80C) and 2 h at +23 C 5 K Failure mode: cohesive failure 3.3.8 Nach berbrennung lt. Pkt. 2.4.3 und 2 h bei +23 C 5 K und Alterung (120 h / +80C) und 2 h bei +23 C 5 K Bruchbild: Kohsionsbruch 3.3.9 After minimum curing Acc. to item. 2.4.1 and 2 h at +23 C 5 K and cold a

    30、ging (24 h / -30C) Failure mode: cohesive failure 3.3.9 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K und Kltealterung (24 h / -30C) Bruchbild: Kohsionsbruch 3.3.10 After overbaking Acc. to item. 2.4.3 and 2 h at +23 C 5 K and cold aging (24 h / -30C) Failure mode: cohesive failure 3.3.

    31、10 Nach berbrennung lt. Pkt. 2.4.3 und 2 h bei +23 C 5 K und Kltealterung (24 h / -30C) Bruchbild: Kohsionsbruch Number/Nummer: L 000 0588 GME ME MATERIAL SPECIFICATION Group/Gruppe: N Paint, Polymers Page/Seite: 6 of/von 10 & Automation First Issue (English): 10-OC-2003 Erstausgabe (Deutsch): 10-OC

    32、-2003 02-FE-2017 A. Plsterl A. Paletschek I. Menke-Hermani Alteration/ Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Autor Gruppenleiter Abteilungsleiter PPA_Material_Specification.docx / Revision: 7 / 01.11.2016 3.3.11 After minimum curing Acc. to item. 2.4.1 and 2 h at +23 C 5 K and cyclic

    33、 corrosion test (GMW 14729, Cycle U) Duration: 10 Cycles Failure mode: cohesive failure 3.3.11 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K und zyklischem Korrosionstest (GMW 14729, Zyklus U) Dauer: 10 Zyklen Bruchbild: Kohsionsbruch 3.3.12 After overbaking Acc. to item. 2.4.3 and 2 h

    34、at +23 C 5 K and cyclic corrosion test (GMW 14729, Cycle U) Duration: 10 Cycles Failure mode: cohesive failure 3.3.12 Nach berbrennung lt. Pkt. 2.4.3 und 2 h bei +23 C 5 K und zyklischem Korrosionstest (GMW 14729, Zyklus U) Dauer: 10 Zyklen Bruchbild: Kohsionsbruch 3.4 Water absorption (GMW 16152) T

    35、est piece preparation acc. to GMW 16152 Application areas acc. to item 2.2 Strip approx. 80 x 10 x 2-3 mm Duration: 24 h 3.4.1 After minimum curing Acc. to item. 2.4.1 and 2 h at +23 C 5 K Water absorption: 3 % by mass (depending on the expansion factor, GMW16150, table 6) 3.4 Wasseraufnahme (GMW 16

    36、152) Probekrperherstellung lt. GMW 16152 Applikationsflchen lt. Pkt. 2.2 Streifen ca. 80 x 10 x 2-3 mm Dauer: 24 h 3.4.1 Nach Minimalaushrtung lt. Pkt. 2.4.1 und 2 h bei +23 C 5 K Wasseraufnahme: 3 Massen-% (abhngig vom Expansionsgrad, GMW16150, Tabelle 6) 3.4.2 After overbaking Acc. to item. 2.4.3

    37、and 2 h at +23 C 5 K Water absorption: 3 % by mass (depending on the expansion factor, GMW16150, table 6) 3.4.2 Nach berbrennung lt. Pkt. 2.4.3 und 2 h bei +23 C 5 K Wasseraufnahme: 3 Massen-% (abhngig vom Expansionsgrad, GMW16150, Tabelle 6) Number/Nummer: L 000 0588 GME ME MATERIAL SPECIFICATION G

    38、roup/Gruppe: N Paint, Polymers Page/Seite: 7 of/von 10 & Automation First Issue (English): 10-OC-2003 Erstausgabe (Deutsch): 10-OC-2003 02-FE-2017 A. Plsterl A. Paletschek I. Menke-Hermani Alteration/ Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Autor Gruppenleiter Abteilungsleiter PPA_Mate

    39、rial_Specification.docx / Revision: 7 / 01.11.2016 3.5 Compatibility with released cavity wax After normal curing acc. to item 2.4.2 and 2 h at +23 C 5 K Application areas acc. to item 2.2 Strip approx. 80 x 10 x 2-3 mm Test piece is to be brushed with 50 100g of wax to be tested. 3.5.1 L 000 0127 A

    40、nd after aging (120 h / +80C) and 2 h at +23 C 5 K No loss of adhesion, no collapsing 3.5 Vertrglichkeit mit freigegebenen Hohlraumkonservierungen Nach Normalaushrtung lt. Pkt. 2.4.2 und 2 h bei +23 C 5 K Applikationsflchen lt. Pkt. 2.2 Streifen ca. 80 x 10 x 2-3 mm Probekrper wird nach Aushrten mit

    41、 50 - 100g des zu prfenden Wachses eingepinselt. 3.5.1 L 000 0127 Und nach Alterung (120 h / +80C) und 2 h bei +23 C 5 K Keine Haftungsverluste, kein Kollabieren 3.5.2 L 000 0131 And after aging (120 h / +80C) and 2 h at + 23 C 5 K No loss of adhesion, no collapsing 3.5.2 L 000 0131 Und nach Alterun

    42、g (120 h / +80C) und 2 h bei +23 C 5 K Keine Haftungsverluste, kein Kollabieren 3.6 Determination of odour propagation According to test method GMW 3205 for automotive trim materials After normal curing Acc. to item. 2.4.2 and 2 h at +23 C 5 K Rating: 6 min. 3.6 Bestimmung des Geruchsverhaltens In A

    43、nlehnung an die fr Karosserieinnenraumteile gel-tende Prfvorschrift GMW 3205 Nach Normalaushrtung lt. Pkt. 2.4.2 und 2 h bei +23 C 5 K Note: min. 6 3.7 Emission test with Headspace GC-MS at +40C, +70C, +120C After normal curing Acc. to item. 2.4.2 and 2 h at +23 C 5 K No emission 3.7 Emissionsprfung

    44、 mittels Headspace GC-MS bei +40C, +70C, +120C Nach Normalaushrtung lt. Pkt. 2.4.2 und 2 h bei +23 C 5 K Keine Emission Number/Nummer: L 000 0588 GME ME MATERIAL SPECIFICATION Group/Gruppe: N Paint, Polymers Page/Seite: 8 of/von 10 & Automation First Issue (English): 10-OC-2003 Erstausgabe (Deutsch)

    45、: 10-OC-2003 02-FE-2017 A. Plsterl A. Paletschek I. Menke-Hermani Alteration/ Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Autor Gruppenleiter Abteilungsleiter PPA_Material_Specification.docx / Revision: 7 / 01.11.2016 3.8 Determination of burn rate (GMW 3232) After normal curing Acc. to it

    46、em. 2.4.2 and 2 h at +23 C 5 K 100 mm/min max. 3.8 Bestimmung der Brennrate (GMW 3232) Nach Normalaushrtung lt. Pkt. 2.4.2 und 2 h bei +23 C 5 K Max. 100 mm/min 3.9 pH-value (Test method TEZ 6514LAB108) pH: 9 2 3.9 pH-Wert (Prfanweisung TEZ 6514LAB108) pH: 9 2 Number/Nummer: L 000 0588 GME ME MATERI

    47、AL SPECIFICATION Group/Gruppe: N Paint, Polymers Page/Seite: 9 of/von 10 & Automation First Issue (English): 10-OC-2003 Erstausgabe (Deutsch): 10-OC-2003 02-FE-2017 A. Plsterl A. Paletschek I. Menke-Hermani Alteration/ Date/ Author/ Group Leader/ Dept. Head/ nderung Datum Autor Gruppenleiter Abteilu

    48、ngsleiter PPA_Material_Specification.docx / Revision: 7 / 01.11.2016 Delivery: Anlieferung: By moulded part, acc. to Opel-drawing. The Opel-Material-N: L 000 0588 the GPDS N: 9274877 the MGO N: 9253 . . . (delivery form) have to be labeled clearly visible on all batches. Per Formteil, nach Opel-Konstruktionszeichnung. Die Opel-Material-Nr.: L


    注意事项

    本文(GME L 000 0588-2017 Pillar Filler (English German).pdf)为本站会员(eveningprove235)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开