FORD WSS-M99J389-A-2012 LOW SOLIDS RESIN WITH DYE CONCENTRATE TO BE USED WITH FORD WSS-M99P1111-A 《带有染色浓缩液的低固体 与福特WSS-M99P1111-A 一起使用》.pdf
-
资源ID：754318
资源大小：35.06KB
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD WSS-M99J389-A-2012 LOW SOLIDS RESIN WITH DYE CONCENTRATE TO BE USED WITH FORD WSS-M99P1111-A 《带有染色浓缩液的低固体 与福特WSS-M99P1111-A 一起使用》.pdf
1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 01 2012 03 20 N Status No replacement named N. Benipal, NA 2004 10 28 Activated C. Bezant Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 1 LOW SOLIDS RESIN WITH DYE CONCENTRATE WSS-M99J389-A NOT TO
2、 BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a solvent-based resin with low solids content and dye concentrate. It is suitable for wood and wooden derived products to be used between insulating sealer. 2. APPLICATION This specification WSS-M99J389-A was released for
3、 low solids resin with dye concentrate for application on bleached bases on insulating sealer for wooden decorative automotive components. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. When in the fully assembled form the veneer assembly m
4、ust perform to the Material specification requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Application method spraying 3.2.2 Storage Stability Shelf life: When stored at 20 - 23C 6 Months 3.2.3 Drying/Curing: Dust Dry after 10 min at 20 23 C Recoatable after 30 min at 20 23 C
