欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    FORD WSS-M4D952-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) UNFILLED MOLDING COMPOUND UV STABILIZED MOLD-IN-COLOR PARTIALLY PAINTED EXTERIOR TO BE USED WITH FORD WSS-M99P1111.pdf

    • 资源ID:753712       资源大小:78.66KB        全文页数:7页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    FORD WSS-M4D952-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) UNFILLED MOLDING COMPOUND UV STABILIZED MOLD-IN-COLOR PARTIALLY PAINTED EXTERIOR TO BE USED WITH FORD WSS-M99P1111.pdf

    1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 07 28 Revised Title, 2., 3.1.2, 3.3.6.1, 3.3.8, 3.3.8.1, 3.3.8.2, Figure 1, 3.6, .3.7; Added 3.3.8.1.1, 3.3.8.1.2, 3.3.8.2.1, 4.4, 4.5, 4.5.1, 4.5.2 150 x 10 x 4 mm specimen A). Test speed shall be 50 mm/minute. Provide a curve of tensile

    2、 stress versus strain using one specimen per lot at each of the following temperatures: -40 C, 23 C and 85 C (Page 8). For ductile materials, the curve shall cover strain through yield point. (s) 3.3.6 Impact Strength, Izod, notched, min (ISO 180/1A, 80 x 10 x 4.0 +/- 0.2 mm specimen use center sect

    3、ion of specimen A, 10 specimens for each test) 3.3.6.1 At 23 +/- 2 C 32 kJ/m2, 100% Partial Break 3.3.6.2 At 10 +/- 2 C 100% Partial Break 3.3.6.3 At 0 +/- 2C 13 kJ/m23.3.6.4 At -40 +/- 2C 3 kJ/m2The test specimens must be conditioned for a minimum of 6 h at the above specified temperature prior to

    4、impact test. Low temperature testing shall be done within the cold chamber, if not possible, test may be conducted outside, but within 5 seconds. ENGINEERING MATERIAL SPECIFICATIONWSS-M4D952-A2 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 3 of 7 (s) 3.3.7 Flexur

    5、al Modulus, min 800 MPa (ISO 178, 80 x 10 x 4.0 +/- 0.2 mm specimen, use center section of specimen A, 2 mm/min test speed, 64 mm support span) 3.3.8 Impact Strength, Multiaxial, Painted and Unpainted Specimens (ASTM D 3763, 100 x 100 x 3.2 +/- 0.2 mm thick smooth surface injection molded specimen,

    6、test a minimum of 10 specimens from 3 individual lots at each condition; 2.2 m/s impact velocity; to be tested using production paint systems. For North America: painted primer ESB-M6J142-A PPG MPP6000; Basecoat/Clearcoat ESB-M2J218-A1/2 1K/1K PPG Oxford White CBCF6466, PPG Clearcoat CUCC1000XA) Tes

    7、t specimens must be conditioned for minimum of 6 h at test temperature prior to impact testing. Low temperature conditioning and testing shall be conducted within the same environmental chamber as the clamp mechanism of the impact device. Painted test specimens must be oriented with paint in tension

    8、 (paint side down). Summarize testing at each condition by providing the following information as well as the information in Figure 1. a. Detailed description of specimen preparation b. Molding conditions: melt and mold surface temperatures, and average injection velocity c. Number of samples tested

    9、 per lot per temperature d. Numbers of lots tested e. Number of samples with ductile failure per each test condition f. Representative force vs. deflection curve for each impact event Test results shall be submitted with an initial qualification of the material with curves (data on CD as well as pap

    10、er copies) and test samples. A ductile failure is defined as a crack that does not radiate more than 10 mm from the center of the impact point. 3.3.8.1 Painted Specimens (Test Method per para 3.3.8) 3.3.8.1.1 Energy at Maximum Load, min (At 0 +/- 2 C) 13.0 J % Ductile, min (At 0 +/- 2 C) 90% 3.3.8.1

    11、.2 Energy at Maximum Load, min (At -10 +/- 2C) 11.0 J % Ductile, min (At -10 +/- 2C) 40% 3.3.8.2 Unpainted Specimens (Test Method per para 3.3.8) 3.3.8.2.1 % Ductile, min 100% (At -40 +/- 2 C) ENGINEERING MATERIAL SPECIFICATIONWSS-M4D952-A2 Printed copies are uncontrolled Copyright 2006, Ford Global

    12、 Technologies, LLC Page 4 of 7 (s) 3.3.9 Heat Deflection Temperature, min 45 C (ISO 75-1 & ISO 75-2, 80 x 10 x 4.0 +/- 0.2 mm specimen use center section of specimen A, flatwise, 0.34 +/- 0.1 mm deflection. At 1.80 MPa) 3.3.10 Heat Aging Performance (ISO 188, except 150 +/- 50 air changes/h, 1000 h

    13、at 120 +/- 2 C. Unaged property values shall be determined at the time of the aged properties determination) 3.3.10.1 Tensile Strength at Yield, Change +/- 10% (Test Method per para 3.3.4) 3.3.10.2 Impact Strength, Izod, Change +/- 15% (Test Method per para 3.3.6, specimens to be notched before heat

    14、 aging) 3.4 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute The specimen size required for material approval is 355 x 100 x 2.0 +/- 0.1 mm (use specimen C) with a smooth surface. Operator Name Sample ID Test no Date/time Lot ID Temperature ( C ) Impact velocity (m/s) Impact energy (J)T

    15、ime to max load (ms)Total time (ms)Maximum load (kN)Energy to max load (J)Total energy (J)Deflection at max load (mm) # of CracksCrack length, max. (mm)Failure type (Ductile / Brittle) 1 2 3 4 5 6 7 8 9 10 Average Median Minimum Maximum Coef. of Var. Std. Dev. Figure 1 - Data SummaryENGINEERING MATE

    16、RIAL SPECIFICATIONWSS-M4D952-A2 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 5 of 7 3.5 PAINTABILITY Painted substrate must comply with all the requirements of paint performance WSS-M2P181-B. Production level materials must be used in preparing test parts/panels

    17、. Improper sample prep can influence test results. 3.6 SCRATCH RESISTANCE, MOLD-IN-COLOR ONLY Rating 2 required at 2.0 N (FLTM BN 108-13, 1.0 +/- 0.1 mm (No visible whitening at steel ball at 7.0 N, 6.0 N, 4.5 N, 3.0 N and 2.0 N) any load) 3.7 WEATHERING RESISTANCE, MOLD-IN-COLOR ONLY After exposure

    18、 in accordance with 3.7.1, 3.7.2, and 3.7.3, the material shall show no color change in excess of specified Gray Scale rating (AATCC Evaluation Procedure 1/ISO 105-A02). In addition, there shall be no cracking, crazing or other deterioration. A slight loss of gloss or chalking will be allowed provid

    19、ed an acceptable appearance can be achieved as specified below by washing with mild detergents and water (ratio 5:95 by volume) or equivalent after the outdoor exposure only. All initial approvals will be based on the preliminary Weatherometer exposure, pending Florida and Arizona exposure results f

    20、or final approval. 3.7.1 Xenon Arc Weatherometer Rating 4-5 (SAE J1960 modified Type “S“ with at least borosilicate inner and outer filters, 75% gloss 0.55 W/m2radiant exposure retention 3000 h exposure, specimen size: 60 x 60 x 2.0 +/- 0.1 mm thick, smooth surface, low gloss injection molded specim

    21、en B) 3.7.2 12 months Florida Rating 4 - 5 12 months Arizona (SAE J1976, 5 south, direct weathering inland, specimen size: 60 x 60 minimum, 2.0 +/- 0.1 mm thick, smooth surface, low gloss injection molded specimen B) 3.7.3 24 months Florida Rating 4 24 months Arizona (SAE J1976, 5 south, direct weat

    22、hering inland, specimen size: 60 x 60 minimum, 2.0 +/- 0.1 mm thick, smooth surface, low gloss injection molded specimen B) ENGINEERING MATERIAL SPECIFICATIONWSS-M4D952-A2 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 6 of 7 4. GENERAL INFORMATION The information

    23、 given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 COEFFICIENT OF LINEAR THERMAL EXPANSION (ISO 11359-2 TMA, temperature range -30 to 100 C) Flow Direction, E-5 mm/mm/C 9.5 10.1 Cross Flow Direction, E-5 mm/mm/C 10.2 13.3 4.2 MOLD SHRINKA

    24、GE (ISO/DIS 294-3, 60 x 60 x 2.0 0.1 mm injection molded specimen) 4.2.1 Molding Shrinkage . After 48 h at 23 +/- 2 C Flow Direction, % 0.9 1.0 Cross Flow Direction, % 1.0 1.3 4.2.2 Post Shrinkage . After 30 minutes at 120 C Flow Direction, % 0.4 1.4 Cross Flow Direction, % 0.4 1.5 4.3 RECYCLING COD

    25、E PP+EPDM 4.4 TENSILE MODULUS (ISO 527-1 & ISO 527-2, 150 minimum x 10 x 4.0 +/- 0.2 mm specimen A test speed: 1 mm/min) 880 MPa 4.5 CHARPY, NOTCHED (ISO 179/1eA, 80 x 10 x 4.0 +/- 0.2 mm specimen use center section of specimen A, 10 specimens) 4.5.1 At 23 +/- 2 C 60 kJ/m24.5.2 At -40 +/- 2 C 10 kJ/

    26、m24.5.3 At 0 +/- 2 C 23 kJ/m2The test specimen must be conditioned for minimum of 6 hours at the above specified temperature prior to impact test. Low temperature testing shall be done within the cold chamber, if not possible, test may be conducted outside, but within 5 seconds. ENGINEERING MATERIAL SPECIFICATIONWSS-M4D952-A2 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 7 of 7 TYPICAL TENSILE STRESS VS TENSILE STRAIN ISO Tensile (50 mm/min Test Speed) Note: Contact Material Engineering for specifics on material


    注意事项

    本文(FORD WSS-M4D952-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) UNFILLED MOLDING COMPOUND UV STABILIZED MOLD-IN-COLOR PARTIALLY PAINTED EXTERIOR TO BE USED WITH FORD WSS-M99P1111.pdf)为本站会员(roleaisle130)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开