欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    FORD WSS-M4D1063-A2-2017 POLYPHENYLENE SULFIDE (PPS) MOLDING COMPOUND IMPACT MODIFIED LOWER MODULUS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D1063-A1).pdf

    • 资源ID:753484       资源大小:84.68KB        全文页数:7页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    FORD WSS-M4D1063-A2-2017 POLYPHENYLENE SULFIDE (PPS) MOLDING COMPOUND IMPACT MODIFIED LOWER MODULUS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D1063-A1).pdf

    1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2017 09 15 Released A. Reaume, NA Controlled document at www.MATS Copyright 2017 Ford Global Technologies, LLC Page 1 of 7 POLYPHENYLENE SULFIDE (PPS) MOLDING COMPOUND, WSS-M4D1063-A1 IMPACT MODIFIED, HIGHER MODULUS POLYPHENYLENE SULFI

    2、DE (PPS) MOLDING COMPOUND, WSS-M4D1063-A2 IMPACT MODIFIED, LOWER MODULUS 1. SCOPE The materials defined by these specifications are flexible, thermoplastic polyphenylene sulfide injection molding compounds. The materials are useful in applications where flexible, high impact nylon has insufficient h

    3、eat resistance. 2. APPLICATION WSS-M4D1063-A1 This specification was released originally for higher temperature clips and fasteners. WSS-M4D1063-A2 This specification was released originally for higher temperature cable ties, the lower modulus allows hand assembly. 2.1 LIMITATIONS These material are

    4、 not applicable for mold in color, weatherable parts. 3. REQUIREMENTS 3.1 APPROVED SOURCES This specification requires the use of approved sources. Only the sources identified on the Ford Approved Source List (ASL) can be used when this specification is listed on the drawing, CAD file, or other docu

    5、ments. The list of approved sources is located within Ford at or available externally through a Ford Materials Engineer. 3.2 CONDITIONING AND TEST CONDITIONS All test values are based on material conditioned for not less than 24 h prior to testing in a controlled environment of 23 +/- 2 C and 50 +/

    6、- 5% relative humidity. Testing of the material should occur in the conditioning environment or soon after removal. 3.3 INFRARED SPECTROPHOTOMETRY AND/OR THERMAL ANALYSIS IR spectra and thermograms from initial material approval shall constitute the reference standard and shall be kept on file at th

    7、e designated material laboratory. The material supplier shall ensure that all future material supplied to the specification shall produce IR spectra and thermograms that correspond to the reference standard when tested under the same conditions. ENGINEERING MATERIAL SPECIFICATION WSS-M4D1063-A1/A2 C

    8、opyright 2017, Ford Global Technologies, LLC Page 2 of 7 3.4 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS 3.4.1 Many 4D resin specifications prior to 2011, identified certain requirements with the symbol (s), which indicated that the mean and +/- 3 sigma values were to be reported. The specificati

    9、on minimum, maximum or range was established using 3 sigma data. For 2011 and beyond, refer to Table 1 for number of samples required for each test. 3.4.2 This specification is based on virgin material and does not allow the addition of recycled content (PIR/PCR). 3.4.3 The use of regrind is permitt

    10、ed, for economic / environmental reasons. Part manufacturers using this specification must complete DV and PV testing with the allowable amount of regrind and the maximum allowable regrind content must be specified on the engineering drawing. Any changes to what is specified on the drawing (no speci

    11、fic amount implies zero regrind) must be approved by Materials and PD Engineering through the formal Ford Motor Company process (SREA) or Engineering Notice. 3.4.4 Ford Materials Engineering may request a Control Plan and Certificate of Analysis (C of A) containing lot testing requirements which mus

    12、t include, but are not limited to: Melt Flow Rate Impact Strength, Notched Charpy at 23 C Tensile Modulus 3.5 SAMPLE PREPARATION All tests shall be carried out on production materials manufactured from the production process unless correlation to a non-production process has been reviewed and approv

    13、ed by Ford Materials Engineering. Unless otherwise specified all tests shall be carried out on injection molded, one-end gated test specimens. The test specimens A and D shall be molded using molding conditions defined in ISO 25137-2. See Table 1 for the number of samples required. Specimens shall b

    14、e as follows: Specimen A 150 minimum x 10 x 4.0 +/- 0.2 mm (ISO 527-2, Specimen Type 1A) Specimen B 355 x 100 x 1.0 +/- 0.1 mm Specimen C 145 x 60 x 3.2 +/- 0.2 mm Specimen D 80 x 10 x 4.0 +/- 0.2 mm (may be cut from the center of Specimen A) Specimen E 100 mm diameter x 3.2 mm Specimen F 80 mm diam

    15、eter x 3.2 mm Specimen G 90 mm x 200 mm Specimen H 50 +/- 1 mm diameter x 3.2 +/- 0.2 mm Specimen I 100 mm x 150 mm, min 3.6 MATERIAL PROPERTIES WSS-M4D1063-A1 WSS-M4D1063-A2 3.6.1 Melt Temperature, C 274 to 284 276 to 286 (ISO 11357, 10 C/min heating rate) 3.6.2 Density, g/cm3 1.23 to 1.25 1.14 to

    16、1.18 (ISO 1183, Method A) ENGINEERING MATERIAL SPECIFICATION WSS-M4D1063-A1/A2 Copyright 2017, Ford Global Technologies, LLC Page 3 of 7 WSS-M4D1063-A1 WSS-M4D1063-A2 3.6.3 Tensile Strength at Break 35 MPa min 35 MPa min (ISO 527-1 and ISO 527-2, Specimen A, 50 mm/minute test speed) 3.6.4 Elongation

    17、 at Break 10 % min 0.5% min (ISO 527-1 and ISO 527-2, Specimen A, 50 mm/minute test speed) 3.6.5 Tensile Modulus 2.1 GPa min 1.4 GPa min (ISO 527-1 and ISO 527-2, Specimen A, 1 mm/minute test speed) 3.6.6 Flexural Modulus 2.0 GPa min 1.4 GPa min (ISO 178, Specimen D, 64 mm support span, 2 mm/minute

    18、test speed) 3.6.7 Impact Strength, Notched Charpy (ISO 179-1/1eA, Specimen D) 3.6.7.1 At 23 +/- 2 C, 6 kJ/m2 min 3 kJ/m2 min Report Break Type 3.6.7.2 At -40 +/- 2 C 3 kJ/m2 min 2.5 kJ/m2 min Report Break Type The test specimen must be conditioned for minimum of 6 hours at the above specified temper

    19、ature prior to impact test. Low temperature testing shall be done within the cold chamber. If not possible, test may be conducted outside, but within 5 seconds. Test specimens must be reviewed by Materials Engineering. 3.6.8 Heat Deflection Temperature at 1.8 MPa, 90 C min (ISO 75-1 and ISO 75-2, Sp

    20、ecimen D, flatwise, Bath silicone oil, 0.34 +/- 0.1 mm deflection.) 3.6.9 Heat Aging Performance (1000 h at 215 +/- 2 C. After heat aging test specimens are to be conditioned in a desiccator for 3 - 5 h at 23 +/- 2 C. Unaged property values shall be determined at the time of the aged properties dete

    21、rmination) 3.6.9.1 Tensile Strength at break, Change - 25 % max (Test Method per para 3.6.3) 3.6.9.2 Impact Strength, Notched Charpy - 25 % max (Test Method per para 3.6.7.1, specimens to be notched before Heat Aging) ENGINEERING MATERIAL SPECIFICATION WSS-M4D1063-A1/A2 Copyright 2017, Ford Global T

    22、echnologies, LLC Page 4 of 7 3.6.10 Flammability (ISO 3795/SAE J369, Specimen B, smooth surface) Burn Rate 100 mm/minute max 3.7 MATERIAL PROPERTIES REPORT ONLY Values are retained in Ford Materials Database . 3.7.1 Molding Shrinkage (ISO 294) After 48 h at 23 +/- 2 C Flow Report Value, % Cross Flow

    23、 Report Value, % Note: Shrinkage vales are determined on plaque samples and represent approximate values, part shrinkage can be affected by molding conditions, part thickness and geometry. 3.7.2 Coefficient of Linear Thermal Expansion (ISO 11359-2) -30 +/- 2 C to Tg +/- 2 C Flow Report Value, E-5 mm

    24、/mm/ C Cross Flow Report Value, E-5 mm/mm/ C Tg to 200 +/- 2 C Flow Report Value E-5 mm/mm/ C Cross Flow Report Value E-5 mm/mm/ C 3.7.3 Melt Viscosity Report Value, Pa.s (ISO 11443, Method A1, 1200 s-1, 310 C) 3.7.4 Poissons Ratio Report Value (ISO 527-1 and ISO 527-2, Specimen A, 1 mm/minute test

    25、speed) 3.7.5 Heat Deflection Temperature at 0.45 MPa, Report Value, C (ISO 75-1 and ISO 75-2, Specimen D, flatwise, Bath silicone oil, 0.34 +/- 0.1 mm deflection.) 3.7.6 Supplemental Information The following curves are to be submitted with the data packages: FTIR, TGA, DSC Engineering Stress/Strain

    26、 x-y data at 23 C, -40 C and 180 C ENGINEERING MATERIAL SPECIFICATION WSS-M4D1063-A1/A2 Copyright 2017, Ford Global Technologies, LLC Page 5 of 7 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact

    27、 for questions concerning Engineering Material Specifications. 4.1 TYPICAL PROPERTIES USING METHODS IN SECTION 3.7 Para. Test Typical Value Typical Value Units WSS-M4D1063-A1 WSS-M4D1063-A2 3.7.1 Molding Shrinkage - After 48 h at 23 2 C Flow Cross Flow 1.3 1.3 1.4 1.4 % % 3.7.2 Coefficient of Linea

    28、r Thermal Expansion -30 to Tg C Flow Cross Flow Tg to 200 C Flow Cross Flow 0.7 0.8 1.3 1.4 0.9 1.0 1.3 1.4 E-4 mm/mm/ C E-4 mm/mm/ C E-4 mm/mm/ C E-4 mm/mm/ C 3.7.3 Melt Viscosity 123 88 Pa.s 3.7.4 Poissons Ratio 0.38 0.37 N/A 3.7.5 Heat Deflection Temperature at 0.45 MPa 135 125 C 4.2 GENERIC IDEN

    29、TIFICATION AND MARKING OF PLASTIC PRODUCTS PPS (ISO 1043/11469) ENGINEERING MATERIAL SPECIFICATION WSS-M4D1063-A1/A2 Copyright 2017, Ford Global Technologies, LLC Page 6 of 7 Table 1: Minimum Sample Size Initial Approval and/or Initial Approval in a New Region Additional Manufacturing Location for P

    30、reviously Approved Material Para. Test Minimum Lots Specimens per Lot Total Test Specimens Lots Specimens per Lot Total Test Specimens 3.6.1 Melt Temperature 3 1 3 3 1 3 3.6.2 Density 1 3 3 1 3 3 3.6.3 Tensile Strength at Break 3 5 15 1 5 5 3.6.4 Elongation at Break 3 5 15 1 5 5 3.6.5 Tensile Modulu

    31、s 1 10 10 3.6.6 Flexural Modulus* 3 10 30 1 10 10 3.6.7 Impact Strength Notched Charpy (per condition)* 3 10 30 1 10 10 3.6.8 Heat Deflection Temperature at 1.8 MPa 3 2 6 1 2 2 3.6.9 Heat Aging Performance 3.6.9.1 Tensile Strength at Break, Change 1 5 5 3.6.9.2 Impact Strength, Notched Charpy, Chang

    32、e 1 10 10 3.6.10 Flammability 1 5 5 3.7.1 Mold Shrinkage 1 5 5 1 5 5 3.7.2 Coefficient of Linear Thermal Expansion (per condition) 1 3 3 3.7.3 Melt Viscosity 3 1 3 3.7.4 Poissons Ratio 1 2 2 1 2 2 3.7.5 Heat Deflection Temperature at 0.45 MPa 1 5 5 1 5 5 3.X.X Curves - IR - TGA - DSC (1st & 2nd heat

    33、) - Stress/Strain Curves (as required) 1 1 1 per test * For these requirements the 3 sigma value from the raw data is used to meet the requirements. 4.3 APPROVAL OF MATERIALS Suppliers desiring approval of their materials shall first obtain an expression of interest from Purchasing, Design or Produc

    34、t Development, and Materials Engineering. The supplier shall submit a completed copy of their laboratory test reports, signed by a qualified and authorized representativeof the test facility, demonstrating full compliance with all the requirements of the Material Specification. Tested material sampl

    35、es must be available for review upon request and kept for a minimum of one year. Upon request, the supplier will review the associated quality control documents (Process Failure Mode and Effects Analysis, Control Plans, Certification testing) with Ford. ENGINEERING MATERIAL SPECIFICATION WSS-M4D1063

    36、-A1/A2 Copyright 2017, Ford Global Technologies, LLC Page 7 of 7 4.4 SUPPLIERS ONGOING RESPONSIBILITY All materials must be equivalent in all characteristics to the material upon which approval was originally granted. Prior to making any changes to the material originally approved, whether or not su

    37、ch changes affect the materials ability to meet the specification requirements, the supplier shall notify the affected Supplier Technical Assistance (STA), Purchasing, and Materials Engineering activities of the proposed changes (with reasons) by submission of a completed Suppliers Request for Engin

    38、eering Approval, SREA. For parts and components using Ford Engineering Material Specifications, all samples tested to the specifications for Design Verification (DV), Production Verification (PV) and Production Part Approval Process (PPAP) sign off must be kept until Job 1. 4.5 RESTRICTED SUBSTANCE

    39、MANAGEMENT STANDARD Substance restrictions imposed by regulations or Company direction applies to the materials addressed by this document. The restrictions are identified in the Restricted Substance Management Standard WSS-M99P9999-A1 which is updated yearly. It is the suppliers responsibility to c

    40、omply with this standard on a continuing basis through IMDS and or GMAP reporting. 4.6 ADDITIONAL REQUIREMENTS Requirements beyond those explicitly stated in this document and the material specification may be specified on the Engineering drawing, Engineering specification (ES), performance specification, System Design Specification (SDS) and/or Attribute Requirement List (ARL). 5. SUMMARY OF REVISIONS


    注意事项

    本文(FORD WSS-M4D1063-A2-2017 POLYPHENYLENE SULFIDE (PPS) MOLDING COMPOUND IMPACT MODIFIED LOWER MODULUS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D1063-A1).pdf)为本站会员(inwarn120)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开