FORD WSS-M2G569-A-2004 ADHESIVE POLYCHLOROPRENE BASED HIGH HEAT RESISTANCE TO BE USED WITH FORD WSS-M99P1111-A 《耐高温聚氯丁烯基粘合剂(和FORD WSS-M99P1111-A一起使用)》.pdf
-
资源ID：753020
资源大小：56.93KB
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD WSS-M2G569-A-2004 ADHESIVE POLYCHLOROPRENE BASED HIGH HEAT RESISTANCE TO BE USED WITH FORD WSS-M99P1111-A 《耐高温聚氯丁烯基粘合剂(和FORD WSS-M99P1111-A一起使用)》.pdf
1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 10 27 Activated C. Bowmar-Scothern Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 1 ADHESIVE, POLYCHLOROPRENE BASED, HIGH HEAT RESISTANCE WSS-M2G569-A 1. SCOPE The material defined by this specific
2、ation is a polychloroprene based high heat resistant contact adhesive. 2. APPLICATION This specification was released for polychloroprene based solvent adhesives used for bonding various trim materials to manufacture automotive components. 3. REQUIREMENTS Material specification requirements are to b
3、e used for initial qualification of materials. The adhesive must also meet the requirements of JMS 20.01.04 Type 2B. When in the fully assembled form the trim assembly must perform to the Material specification requirements of WSS-M15P4-E or as specified on the engineering drawing. 3.1 STANDARD REQU
4、IREMENT FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Amber liquid 3.2.2 Total Solids 28 +/- 1.0% 3.2.3 Viscosity (at make) 5500 - 6500 cps 3.2.4 Specific gravity 0.85 - 0.88 3.2.5 Flash point -18 C
