欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    FORD WSS-M11P65-A-2008 TAPE PERFORMANCE PRESSURE SENSITIVE ADHESIVE TWO SIDED INTERIOR AND EXTERIOR EMBLEM AND BADGES TO BE USED WITH FORD WSS-M99P111-A 《室内和室外用徽章式压敏胶带的性能(与FORD W.pdf

    • 资源ID:751219       资源大小:71.41KB        全文页数:8页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    FORD WSS-M11P65-A-2008 TAPE PERFORMANCE PRESSURE SENSITIVE ADHESIVE TWO SIDED INTERIOR AND EXTERIOR EMBLEM AND BADGES TO BE USED WITH FORD WSS-M99P111-A 《室内和室外用徽章式压敏胶带的性能(与FORD W.pdf

    1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2008 08 21 Globalization M. Mehandru, FNA 2008 02 04 Revised Table 1 on page 6 M. Mehandru 2007 04 20 Activated M. Mehandru Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 8 TAPE, PERFORMANCE, PRESSURE

    2、SENSITIVE ADHESIVE WSS-M11P65-A TWO SIDED, INTERIOR AND EXTERIOR, EMBLEM, AND BADGES 1. SCOPE The material defines performance requirements of adhesive foam tapes used for interior/exterior automotive application. The tapes are coated on both sides with a pressure sensitive adhesive and protected wi

    3、th a release liner. 2. APPLICATION This specification was released originally to define adhesion performance requirements to retain interior and exterior trim parts including script ornaments, emblems, and badges. Applications require alcohol wipe or lint free dry wipe prior to attaching any parts.

    4、The bonding surface shall be free from contaminates prior to attaching any parts. 2.1 LIMITATIONS This tape is not recommended to be used for body side moldings, claddings, wheel flares, rocker moldings, and spoilers applications; except where mechanical attachments are used in conjunction with the

    5、tape. The tape alone is not recommended to retain these parts to the vehicle. Assembling these parts below 16 C is not recommended. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Producti

    6、on Materials (WSS-M99P1111-A). 3.2 TAPE PERFORMANCE MANAGEMENT All tapes evaluated to this specification must have Supplement A completed filled out and signed by Ford Materials Engineering, the tape supplier, and the tier one supplier. Compatibility of the tape with base material is the responsibil

    7、ity of the tier one supplier. Any change will require a resubmission of supplement A. Tape approved to this specification must be tested to all current production paint systems and any newly developed paint systems as stipulated in VOP PTG-205. In addition to the requirements listed in this specific

    8、ation, requirements listed in the appropriate SDS for the application must be met, unless otherwise agreed to by Ford engineering. ENGINEERING MATERIAL SPECIFICATION WSS-M11P65-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 8 3.3 FINISHED PARTS Testing must

    9、 be conducted at Design Verification (DV) and Process Validation (PV) per Table 1 unless otherwise agreed to by Materials Engineering, and on actual production parts or a section of the part whenever possible. Where part dimensions limits test equipment access, representative test samples may be sub

    10、stituted. PV Testing must be conducted on actual production parts. 3.4 TAPE ADHESION REQUIREMENTS 3.4.1 Pluck Adhesion, min, kPa 450 Prepare test blocks per FLTM BU 112-02, Method E. Apply 12.7 X 25.4 mm sample to current exterior quality paint panels after the precondition time, ABS should be pulle

    11、d normal to the panel surface at a rate of 25.4 mm/minute. The samples shall meet the adhesion requirements as received and after exposure to the environmental aging conditions listed below. Expose four samples to each of the following conditions: Room Temperature Aging, min (Do not precondition for

    12、 72 h) 20 minutes 72 h Heat Aging, min Interior At or Above Beltline: 168 hours, 100 +/- 2 C Below Beltline: 168 hours, 90 +/- 2 C Scuff Plate / Floor Area: 168 hours, 80 +/- 2 C Special Area: 168 hours, (Review with Materials Engineering.) The standard requirement will be assumed to be “At or Above

    13、 Beltline“ unless otherwise noted on Supplement A, and the Engineering Drawing. Exterior 336 hours at 80 +/- 2 C Humidity, min 336 hours at 38 C and 98 +/- 2% RH Cycle Test, min (5 cycles consisting of:) 3 h at 80 +/- 2 C 1 h at 24+/- 2 C & 50 +/- 2% RH 3 h at -40 +/- 2 C 1 h at 24+/- 2 C & 50 +/- 2

    14、% RH 16 h at 38 +/- 2 C and 95 +/- 5% RH ENGINEERING MATERIAL SPECIFICATION WSS-M11P65-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 3 of 8 3.4.2 Peel Adhesion, min, N/mm (FLTM BU 112-02, Method A) The samples shall meet the adhesion requirements as received an

    15、d after exposure to environmental aging conditions listed below. Apply a anodized aluminum (per para 4.1.1) to the unlined adhesive side of the tape before testing and determine adhesion to current exterior body quality painted panels prepared per para 4.2 and emblem/bodyside molding substrate as id

    16、entified by Materials Engineering. Expose four samples to each of the following conditions: Room Temperature Aging, min (Do not precondition for 72 h) 20 minutes 0.4 72 h 0.6 Heat Aging, min 1.3 336 hours days at 80 +/- 2 C Humidity, min 0.7 336 hours at 38 C and 98 +/- 2% RH Cycle Test, min 1.3 (5

    17、cycles consisting of:) 3 h at 80 +/- 2 C 1 h at 24+/- 2 C & 50 +/- 2% RH 3 h at -40 +/- 2 C 1 h at 24+/- 2 C & 50 +/- 2% RH 16 h at 38 +/- 2 C and 95 +/- 5% RH 3.4.3 Shear Adhesion, min, kPa Prepare four 645 mm2 overlap shear test specimen using 1 x 3 in (25 x 75 mm) test panels with production pain

    18、t to anodized aluminum. Prepare 12 samples and condition for 24 h at 23 +/- 2 C. Use 3 samples of the “as received“ shear adhesion and 3 samples for each of the environments listed below: As Received: 410 Heat Aging, min 410 336 hours at 80 +/- 2 C Humidity Aging, min 240 ENGINEERING MATERIAL SPECIF

    19、ICATION WSS-M11P65-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 4 of 8 336 hours at 38 C and 98 +/- 2% RH Cycle Test, min 310 (10 cycles consisting of:) 3 h at 80 +/- 2 C 1 h at 24+/- 2 C & 50 +/- 2% RH 3 h at -40 +/- 2 C 1 h at 24+/- 2 C & 50 +/- 2% RH 16 h a

    20、t 38 +/- 2 C and 95 +/- 5% RH Four hours after completion of the exposures, measure shear adhesion in a testing machine having a jaw separation rate of 12.7 mm/minute. All shear adhesion tests are conducted at 23 +/- 2 C. 3.4.4 Liner Removal, max, N/mm (ASTM D 1000 with exceptions below) As Received

    21、 0.5 1 h at 54 +/- 2 C 0.5 ASTM D 1000, except apply the unlined adhesive side of the tape to an anodized aluminum panel with light finger contact and no added roller weight. Measure the force required to peel the liner from the tape. 3.4.5 Holding Power, max 1.0 mm creep (FLTM BU 101-06, Method B,

    22、100 h) At 70 +/- 2 C (500 g weight) At 120 +/- 2 C for 30 min (250 g weight) Prepare 3 enamel/anodized aluminum 645 mm2 overlap shear test specimens. After conditioning for 24 h, at 23 +/- 2 C hang 1 test specimen vertically at each specified temperature. Gently attach weights, as specified, to each

    23、 specimen. All bonded assemblies must support the specified weight for the specified time. 3.5 PERFORMANCE REQUIREMENTS FOR ASSEMBLIES Assembly Resistance Requirements The following requirements shall be assessed on sections which are primed or have an aluminum barrier: Test bar assemblies are to be

    24、 bonded to test panels per FLTM BU 112-02, Method C. The parts as received and after being subjected to the exposures listed below shall conform to the following requirements: a) No cracking, curling of edges, blistering, separation, or loss of adhesion. b) In addition, there shall be no evidence of

    25、 shrinkage of compatibility between materials of the construction. c) Any adhesive failure will be cause for rejection. Sample Exposure Conditions: ENGINEERING MATERIAL SPECIFICATION WSS-M11P65-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 5 of 8 3.5.1 Cold Sho

    26、ck Resistance at -30 +/- 2 C (FLTM BU 109-02) All test bars must stay adhered through 10 slams. 3.5.2 Thermal Shock (FLTM BI 107-05) 4 h water immersion at 32 +/- 2 C 4 h at -30 +/- 2 C Direct steam blast 15 s 3.5.3 Odor, max (For interior application only) Rating 2 (SAE J1351/FLTM BO 131-01) 3.5.4

    27、Fogging ( For interior application only) (SAE J1756, 3 h at 100 C heating, 21 +/- 2 C cooling plate, post test conditioning 1 h and 16 h) Fog Number, min 70 Formation of clear film, droplets or crystals is cause for rejection. 3.5.5 Flammability, max burn rate (For interior application only) 100 mm/

    28、minute (ISO 3795, sample part) 3.5.6 Wet-Out The objective is to verify proper contact of the adhesively attached exterior ornamentation to the painted vehicle. DV - Ford Corporate Engineering Test Procedure (CETP): 01.18-L-400 PV - Ford Corporate Engineering Test Procedure (CETP): 01.18-L-401 3.6 S

    29、TORAGE STABILITY The unwind, pull, and ease of the liner backing removal measured by hand peel examination shall not change appreciable after 12 months storage at temperatures between 32 +/- 2 C 48 +/- 2 C. 3.7 FUNCTIONAL APPROVAL Materials being evaluated for approval to this specification shall be

    30、 subjected to a production trial. Functional trial results must be approved by the affected assembly operation and Design Engineering. Results shall be made available to Materials Engineering prior to material approval and release. 3.8 LOT CERTIFICATION Lot certification requirements shall be includ

    31、ed in suppliers process control plan and defined in the Ford Purchasing Agreement and engineering drawing. ENGINEERING MATERIAL SPECIFICATION WSS-M11P65-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 6 of 8 TABLE 1.0: DV/PV Requirements Sample size/color For Ini

    32、tial Approval Only To be done at DV Testing To be done at PV Testing Pluck Adhesion 4 Per Para 3.4.1 Per SDS Peel Adhesion 4 Per Para 3.4.2 Shear Adhesion 4 Per Para 3.4.3 Liner Removal 4 Per Para 3.4.4 Holding Power 3 Per Para 3.4.5 Cold Shock Resistance Per Para 3.5.1 Per SDS Thermal Shock 3 Per P

    33、ara 3.5.2 Per SDS Odor 3 Per Para 3.5.3 Fogging 3 Per Para 3.5.4 Flammability 3 Per Para 3.5.5 Wet Out 6 - 10 Per Para 3.5.6 Per Para 3.5.6 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 MATERIAL

    34、REFERENCES FOR TEST PANELS 4.1.1 Anodized Aluminum - 0.13 mm thick - Anodized Coating per ESB-M4P6. 4.1.2 Painted panels Production intent painted test panels 4.2 TEST BAR PREPARATION FOR PERFORMANCE REQUIREMENTS For tapes and bars requiring primer: Apply production intent primer to assembly. Allow

    35、to dry 5 minutes. Apply non-liner side of tape to primer coated side of the test bars. Roll as describes in FLTM BU 112-02. For tapes and bars not requiring primer: Apply non-liner side of tape to primer coated side of the test bars. Roll as describes in FLTM BU 112-02, Method C. For aluminum barrie

    36、r Assemblies: Apply the non-liner side of the tape to the aluminum side of the test bar. Roll as described in FLTM BU 112-02. ENGINEERING MATERIAL SPECIFICATION WSS-M11P65-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 7 of 8 4.3 PRODUCTION APPLICATION METHODS 4

    37、.3.1 Application Temperature, min 16 C Mating surfaces should be matched (contoured or parallel) to insure 100% contact of the bond area. For maximum adhesion, tape should be applied to freshly painted surfaces. When tape is applied to part prior to assembly, the part shall not be subjected to a pai

    38、nt and bake cycle. Once a pressure sensitive tape-backed ornament has been bonded, and for any reason removed (in-plant pull test), it shall not be reused. If the adhesive surface of the pressure sensitive tape becomes soiled, the pressure sensitive tape-backed ornament should not be used. The adhes

    39、ive side of tape, shall not be touched or handled, once release paper has been removed. ENGINEERING MATERIAL SPECIFICATION WSS-M11P65-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 8 of 8 SUPPLEMENT A Materials Engineering Tracking # Ford programs: Part Type: Em

    40、blem/Badge/Script/Ornament Other: Location (s) on vehicle for Part application: OEM Paint Supplier & Type:_ Tier 1 Supplier Name: Tier 1 Supplier Report number: Contact person (name/title/phone/E-Mail): Part Number: _ Product Construction (substrate (s), Tape, etc ): _ A-Side Surface (Substrate): _

    41、Tape: _ Promoter: _ B-Side Surface (Chrome/paint/raw): _ Tape Supplier Name: _ Contact person (name/title/phone/E-Mail): Requirements: Test adhesion of tape to OEM Paint type (change) per Sections 3.3 and 3.4 Test adhesion of tape to representative substrate (change) per Section 3.3.2 Tape Thickness (actual): Signed & Dated: TAPE SUPPLIER TIER ONE SUPPLIER MATERIALS ENGINEER


    注意事项

    本文(FORD WSS-M11P65-A-2008 TAPE PERFORMANCE PRESSURE SENSITIVE ADHESIVE TWO SIDED INTERIOR AND EXTERIOR EMBLEM AND BADGES TO BE USED WITH FORD WSS-M99P111-A 《室内和室外用徽章式压敏胶带的性能(与FORD W.pdf)为本站会员(eastlab115)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开