欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    FORD WSK-M98P6-A-2008 FINISHED PARTS PLASTICS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用塑料用终饰部件 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M1P83-C2 FORD WSS-M1P83-C2 FORD.pdf

    • 资源ID:751048       资源大小:42.88KB        全文页数:13页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    FORD WSK-M98P6-A-2008 FINISHED PARTS PLASTICS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用塑料用终饰部件 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M1P83-C2 FORD WSS-M1P83-C2 FORD.pdf

    1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Changes 2008 10 28 N-STATUS Replaced by WSS-M1P83-C2, WSS-M2P180-C, WSS-M2P181-C, WSS-M98P13-B C. McComb, FNA 1996 03 25 Revised Upd.& Rev.para 3.5.5,3.12,3.14,Table 1 L.Rodigas 1990 06 01 Released EP00E01031536000 L.

    2、Rodigas WP 3948-a Page 1 of 13 FINISHED PARTS, PLASTICS, EXTERIOR WSK-M98P6-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE This specification defines performance requirements for finished exterior plastic parts consisting of various components and/or materials. The numerical values not defined within this

    3、 document will be specified on this document table found on Engineering Drawing. 2. APPLICATION These parts are generally used for various exterior applications (e.g. radiator grilles, body side moldings, name plates) when specific part performance specifications are not established. 3. REQUIREMENTS

    4、 General Definitions regarding Requirements and Test Methods. Based on the construction of the finished parts the requirements are divided into various material groups (see Table 1 for recommendation of requirements for different material groups). Test requirements vary in respect of application and

    5、 are defined by the methods as specified (see Table 1). Specified test requirements (test conditions) are as specified on Engineering drawing for the finished part. Test according to para 3.4, 3.5, 3.6, 3.7, 3.8, 3.9 and 3.10 of Table 1 shall be carried out on the complete finished part or a represe

    6、ntative section of the finished part containing all material groups. Each material group shall be evaluated separately. Surface requirements (from para 3.11 onwards) shall be tested separately for each material group (see Table 1). They shall be tested only if not already tested to individual materi

    7、al specification requirements as quoted on Engineering Drawing. ENGINEERING MATERIAL SPECIFICATION WSK-M98P6-A WP 3948-b Page 2 of 13 3.1 QUALITY SYSTEM REQUIREMENTS Material suppliers and part producers must conform to Quality System Requirements, QS-9000. Material specification requirements are to

    8、 be used for initial qualification of materials. A Control Plan for ongoing production verification is required. This plan must be reviewed and approved by the relevant Ford Materials activity and/or Ford Supplier Technical Assistance (STA) prior to production parts submission. Appropriate statistic

    9、al tools must be used to analyze process/product data and assure consistent processing of the materials. Part producers using this material in their products, must use Ford approved materials and must conform to a process control plan which has been approved by STA and/or the relevant Materials Acti

    10、vity. 3.2 INFRARED SPECTROPHOTOMETRY AND/OR THERMAL ANALYSIS Ford Motor Company, at its option, may conduct infrared and/or thermal analysis of material/parts supplied to this specification. The IR spectra and thermograms established for initial approval shall constitute the reference standard and s

    11、hall be kept on file at the designated material laboratory. All samples shall produce IR spectra and thermograms that correspond to the reference standard when tested under the same conditions. 3.3 CONDITIONING AND TEST CONDITIONS All test values indicated herein are based on material conditioned in

    12、 a controlled atmosphere of 23 +/- 2 C and 50 +/- 5 % relative humidity for not less than 24 h prior to testing and tested under the same conditions unless otherwise specified. 3.4 APPEARANCE (FLTM BI 109-01) Color, gloss and surface finish shall match the Master Appearance Sample as approved by the

    13、 Design Department. 3.5 ADHESION Adhesion shall be tested on the original part and 15 to 30 minutes after Heat Aging according to para 3.6. Test Methods: One of the following test method shall be chosen according to application and shown on Engineering Drawing. 3.5.1 Coating Adhesion No chipping (FL

    14、TM BI 106-01, Method C) 3.5.2 Peel Strength As specified on (ASTM D 1000, evaluate plot Eng. Drawing according to ISO 6133, Figure 1) ENGINEERING MATERIAL SPECIFICATION WSK-M98P6-A WP 3948-b Page 3 of 13 3.5.3 Manual Separation The individual layers of material must not be separable from each other

    15、by mechanical means without cohesive break. 3.5.4 Visual Evaluation The finished part shall show no evidence of blisters or delamination. 3.5.5 Bonding Adhesive Bonded parts must be tested in accordance with relevant and applicable adhesion requirements of tape performance specifications WSK-M11P51-

    16、H (Emblems), WSK-M11P49-A (Body Side Moldings), WSK-M11P48-A (Weatherstrips) or as defined on Engineering Drawing. 3.6 HEAT AGING The finished part shall show no visible evidence of warpage, deformation, cracks, delamination or other failures to an extent that would affect its use in the ultimate as

    17、sembly. There shall be no local shrinkage where the part has been gated which would interfere with assembly to relating parts, or affect its appearance. The finished part shall show no change in appearance when compared with the original part. The adhesion of the individual surface coating shall mee

    18、t the requirements of para 3.5. Test Methods: One of the following test conditions shall be chosen according to application and shown on Engineering Drawing. 3.6.1 Condition A Mount the finished part according to vehicle installation on a suitable fixture and place it in car position in a mechanical

    19、 convection oven maintained at 80 +/- 2 C for 7 days. Evaluate after conditioning at 23 +/- 2 C. 3.6.2 Condition B As under para 3.6.1, except use the unmounted part. 3.6.3 Condition C As under para 3.6.1, except maintain part at test temperature as specified on Engineering Drawing. 3.6.4 Condition

    20、D As under para 3.6.1, except maintain the unmounted part at test temperature as specified on Engineering Drawing. ENGINEERING MATERIAL SPECIFICATION WSK-M98P6-A WP 3948-b Page 4 of 13 3.7 PAINT REPAIR OVEN RESISTANCE (EAO only) The finished part shall show no evidence of deformation or other change

    21、s which would interfere with asembly to mating part or affect its appearance. The adhesion of painting shall meet the requirements of para 3.5. 3.7.1 Condition A As under para 3.6.1, except maintain the mounted part at 120 +/- 2 C for 30 minutes. 3.7.2 Condition B As under para 3.6.1, except maintai

    22、n the unmounted part at 120 +/- 2 C for 30 minutes. 3.8 ENVIRONMENTAL CYCLING (FLTM BQ 104-07) The finished part shall show no evidence of warpage, deformation, cracks, delamination or other failures to an extent that would affect its use in the ultimate assembly. The finished part shall show no cha

    23、nges in appearance when compared with the original finished part. The adhesion of the individual surface coating shall meet the requirements of para 3.5. Test Methods: The specific test procedure of FLTM BQ 104-07 has to be selected according to the application and shown on Engineering Drawing. 3.9

    24、RESISTANCE TO COLD IMPACT The finished part shall show no breaks, cracks or other failures. Test Methods: One of the following test conditions shall be defined according to application and shown on Engineering Drawing. 3.9.1 Condition A FLTM BO 151-01, Method B, except the finished part shall be mou

    25、nted as assembled in the vehicle in a suitable device and maintained at - 40 +/- 1 C for 16 h. The impact shall be carried out on areas regarded as most vulnerable in respect of shape and installation on the vehicle. Evaluate after conditioning to 23 +/- 2 C. 3.9.2 Condition B The mounted finished p

    26、art shall be maintained as defined under para 3.9.1, except height of drop 300 mm. ENGINEERING MATERIAL SPECIFICATION WSK-M98P6-A WP 3948-b Page 5 of 13 3.9.3 Condition C As under para 3.9.1, except use the unmounted part. 3.9.4 Condition D As under para 3.9.2, except use the unmounted part. 3.10 SH

    27、OCK TEST The finished part shall show no breaks, cracks or other failures. The adhesion of the individual surface coating shall meet the requirements of para 3.5. Test Method: Maintain the finished part or section of it at - 40 +/- 2 C for 16 h. Then immediately immerse part in water at 70 +/- 2 C f

    28、or 5 minutes. Evaluate after conditioning to 23 +/- 2 C. 3.11 RESISTANCE TO WEATHERING (Applicable to parts using materials without previous weathering approval) After exposure the part shall show no fading or color change in excess of specified AATCC rating (AATCC Gray Scale for Evaluating Change i

    29、n Color, 10 step). In addition, there shall be no cracking, crazing or other deterioration. All initial approvals will be based on the preliminary Weatherometer exposure (para 3.11.1), pending Florida Exposure results for final approval. 3.11.1 Xenon Arc Weatherometer Rating 4 except (SAE J1960, Irr

    30、adiation (in kJ/m2) Rating 4 - 5 for PP, as defined on Engineering Drawing) TPO and Ionomers 3.11.2 12 months Florida Rating 4 except (FLTM BI 160-01, 5 deg south, Rating 4 - 5 for PP, direct weathering inland) TPO and Ionomers 3.11.3 24 months Florida Rating 3 - 4 (FLTM BI 160-01, 5 deg south, dire

    31、ct weathering inland) ENGINEERING MATERIAL SPECIFICATION WSK-M98P6-A WP 3948-b Page 6 of 13 3.12 RESISTANCE TO SCRATCHING AND SURFACE DEFORMATION 3.12.1 Test Method A (FLTM BN 108-13, 1 mm scratch balls, instrumental evaluation of 3.0 N scratch mark) Percentage of Marking, max 30 % or as defined on

    32、Engineering Drawing 3.12.2 Test Method B (FLTM BN 108-13, 1 mm scratch balls, visual evaluation) Rating 1 at 2 N scratch mark or as defined on Engineering Drawing. 3.13 RESISTANCE TO HOT WATER HIGH PRESSURE CLEANING The part shall show no delamination of surface coating or other surface failures. Te

    33、st Methods: One of the following test conditions shall be defined according to application and shown on Engineering Drawing. 3.13.1 Condition A (FLTM BO 160-04) 3.13.2 Condition B (FLTM BO 160-04, except test condition tbd) 3.13.3 Thermal Shock Resistance (FLTM BI 107-05) Applicable for thermoplasti

    34、c polyolefin elastomers and/or modified polypropylene materials only. 3.14 RESISTANCE TO CHIPPING 3.14.1 Stone Chipping, max Rating 3 or as (FLTM BI 157-04, except water defined on immersion shall be omitted) Engineering Drawing 3.14.2 Steel Shot, max Rating 1 or as (FLTM BI 107-01, Gravelometer) de

    35、fined on Engineering Drawing 3.14.3 Stone Shot, max Rating 2B or as (SAE J400, 10 cycles) defined on Engineering Drawing Applicable for group II, painted material parts only. ENGINEERING MATERIAL SPECIFICATION WSK-M98P6-A WP 3948-b Page 7 of 13 3.15 RESISTANCE TO ABRASION (FLTM BN 154-01, 1000 cycle

    36、s) The abraded area shall be compatible with the adjacent unabraded area. Tests carried out on original parts and after heat aging (para 3.6) and environmental cycling (para 3.8). Applicable for group III, plastic, hot stamped/metallized/printed material parts only. 3.16 RESISTANCE TO WAXING AND DEW

    37、AXING COMPOUNDS (FLTM BO 155-01, except use acrylic system) The part shall show no breaks, cracks or other failures. The adhesion of the individual surface coating shall meet the requirements of para 3.5. 3.17 RESISTANCE TO WATER SPOTTING (FLTM BI 113-01, except soap solution shall be omitted) No ch

    38、ange in color tone and/or gloss. 3.18 RESISTANCE TO ACID SPOTTING (FLTM BI 113-02) No change in color tone and/or gloss. Applicable for group II, painted parts only. 3.19 RESISTANCE TO WATER IMMERSION 240 h or as (FLTM BI 104-01) defined on Engineering Drawing The part shall not show any surface cha

    39、nges, loss of gloss or adhesion. The adhesion of the individual surface shall meet the requirements of para 3.5. Applicable for group II, painted, group III, plastic/hot stamped/ metallized and group IV plastic/laminated parts only. 3.20 RESISTANCE TO CORROSION (CASS Test) (ASTM B 368, 24 h unless o

    40、therwise specified on Engineering Drawing) The part shall not show any surface changes, loss of gloss or adhesion. The adhesion of the individual surface shall meet the requirements of para 3.5. 3.20.1 Condition A (Evaluate according to FLTM BI 104-01) ENGINEERING MATERIAL SPECIFICATION WSK-M98P6-A

    41、WP 3948-b Page 8 of 13 3.20.2 Condition B (Evaluate according to FLTM BI 104-01, except testing time and distance for evaluation as defined on Engineering Drawing) Applicable for group III, metallized parts only. 3.21 RESISTANCE TO WINDSHIELD WASHER FLUID The part shall show no breaks, cracks, blist

    42、ers, surface changes or other failures. Test Method: FLTM BO 101-05, except test at 23 +/- 2 C, 2 cycles, mixture of 50 volume % isopropylalcohol and 50 volume % distilled water. 3.22 FUEL RESISTANCE (FLTM BO 101-05) The part shall show no breaks, cracks, blisters, surface changes or other failures.

    43、 The adhesion of the individual surface coating shall meet the requirements of para 3.5. Test Fuels: 3.22.1 85 % Fuel C + 15 % Methanol (ASTM D 471/ISO 1817) 3.22.2 Diesel Fuel (ISO 1817, Fuel F) 3.22.3 As specified on Engineering Drawing. 3.23 RESISTANCE TO CHROME NICKEL CLEANERS The part shall sho

    44、w no cracks, color tone changes or other surface failures. Test Method: Treat the part or a section of it with released Motorcraft cleaners according to the directions of use. To remove left over cleaner, use released Motorcraft car shampoo according to the directions of use. Use a soft brush (natur

    45、al bristles), rinse with tap water (30 - 40 C) and rub (using a soft cloth) until dry surface is achieved. Applicable for group III, metallized parts only. ENGINEERING MATERIAL SPECIFICATION WSK-M98P6-A WP 3948-b Page 9 of 13 3.24 ADHESIVE STAINING The part shall not show any change in color or stai

    46、ning. Test Method: The part shall be placed in the fluorescent sunlamp cabinet for 150 h. Examination shall be done after cooling to 23 +/- 2 C. Equipment according to FLTM BO 115-01. Applicable for group IV, laminated parts only. 3.25 PAINT STAINING (FLTM BP 153-01, Method A) The contact material s

    47、hall produce no stain or change in surface appearance on the painted panel beyond the boundaries of the test combination. Slight contact staining is permitted if not otherwise specified on Engineering Drawing. Note: Slight softening of contact area is permitted if not otherwise specified on Engineer

    48、ing Drawing. 3.26 SUPPLIERS RESPONSIBILITY All materials supplied to this specification must be equivalent in all characteristics to the material upon which approval was originally granted. Prior to making any change in the properties, composition, construction, color, processing or labeling of the

    49、material originally approved under this specification, whether or not such changes affect the materials ability to meet the specification requirements, the Supplier shall notify Purchasing, Toxicology and the affected Materials Engineering activity of the proposed changes and obtain the written approval of the Materials Engineering activity. Test data, test samples and a new code identification are to be submitted with the request. Substance restrictions imposed by law, regulations or Ford, apply to the materials addressed by this document. The restrictions are defined


    注意事项

    本文(FORD WSK-M98P6-A-2008 FINISHED PARTS PLASTICS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用塑料用终饰部件 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M1P83-C2 FORD WSS-M1P83-C2 FORD.pdf)为本站会员(lawfemale396)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开