FORD WM950-1994 AIR LEAKAGE TEST - DRYSEAL TAPER THREADS IN ACCORDANCE WITH SAE J476A《符合SAE J476A的干密封锥螺纹的气密性试验》.pdf
-
资源ID：748582
资源大小：8.48KB
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD WM950-1994 AIR LEAKAGE TEST - DRYSEAL TAPER THREADS IN ACCORDANCE WITH SAE J476A《符合SAE J476A的干密封锥螺纹的气密性试验》.pdf
1、FORD WORLDWIDE FASTENER STANDARDDate: 1994-08-01Engineering Standards & 1 of 1 Printed copies are uncontrolled .Systems Engineering (ESSE)WM 950Air Leakage Test - Dryseal Taper Threads in Accordance with SAE J476a1. SCOPE.This standard covers the requirements for air leakage testing 1/8, 1/4, 3/8, 1
2、/2, and 3/4 tapered drysealpipe threads produced in accordance with SAE J476a before coating.1.1 REFERENCES.ASTM E432 - Guide for the selection of a Leak Testing Method.SAE J476A - Dryseal pipe threads.2. LEAKAGE TEST.The component shall be screwed into a mating tapered mild steel female thread to S
3、AE J476a in a suitabletest rig to the torque specified in Table 1 and a pressure of 4 bar applied to the joint. The leakage rateshall not exceed 1 cubic centimeter of air per minute.NOTE: The test equipment and the method of testing is at the discretion of the manufacturer provided hecan demonstrate
4、 that the results can be equated to an air leakage rate. A guide to the selection of amethod by which leakage is measured can be found in ASTM E432.A mass spectrometer helium detector shall be used for referee purposes.Table 1.Dryseal Thread Size Tightening Torque Nm +/- 10%1/81/43/81/23/42030354050
