FORD SK-M1B9550-A-2009 SILICONE REMOVER TO BE USED WITH FORD WSS-M99P1111-A 《硅树脂清除剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf
-
资源ID:748125
资源大小:22.29KB
- 资源格式: PDF
下载积分:10000积分
快捷下载

账号登录下载
微信登录下载
下载资源需要10000积分(如需开发票,请勿充值!)
友情提示
2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。
|
FORD SK-M1B9550-A-2009 SILICONE REMOVER TO BE USED WITH FORD WSS-M99P1111-A 《硅树脂清除剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf
1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 06 03 N-STATUS No Replacement Named A. Wedepohl, NA 2003 01 27 Revised Para 3.0 inserted 1981 11 09 Released SM/EQ 8875 TP Printed copies are uncontrolled Page 1 of 1 Copyright 2009, Ford Global Technol
2、ogies, Inc. SILICONE REMOVER SK-M1B9550-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a silicone remover for the service repair area. 2. APPLICATION In general the material is used to remove silicone from substrates to be painted. 3. REQUIREMENTS 3.0 STANDARD
3、 REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 COMPOSITION Blend of alcohols and aliphatic hydro-carbons. 3.2 DENSITY 0.738 - 0.743 at 20 C (ASTM D 1298) 3.3 DISTILLATION R
4、ANGE 96 131 C (ASTM D 1078) 3.4 FLASH POINT below 0 C (ASTM D 56) 3.5 REFRACTIVE INDEX 1.4106 - 1.4114 (ASTM D 1218) 3.6 COLOR water white 3.7 TOXICITY The material shall conform to the safety regulations applicable to the plant and/or country where the material shall be used and has to be labeled accordingly if necessary. Further the material shall not have an obnoxious or objectionable odor. 3.8 SHELF STABILITY Min 2 years as supplied in the closed original container.