欢迎来到麦多课文档分享! | 帮助中心 海量文档,免费浏览,给你所需,享你所想!
麦多课文档分享
全部分类
  • 标准规范>
  • 教学课件>
  • 考试资料>
  • 办公文档>
  • 学术论文>
  • 行业资料>
  • 易语言源码>
  • ImageVerifierCode 换一换
    首页 麦多课文档分享 > 资源分类 > PDF文档下载
    分享到微信 分享到微博 分享到QQ空间

    FORD NSP MK-FASTENERS-1995 NSP METRIC MK-FASTENERS (INACTIVE FOR NEW DESIGN 1 1 1995).pdf

    • 资源ID:748039       资源大小:520.92KB        全文页数:8页
    • 资源格式: PDF        下载积分:10000积分
    快捷下载 游客一键下载
    账号登录下载
    微信登录下载
    二维码
    微信扫一扫登录
    下载资源需要10000积分(如需开发票,请勿充值!)
    邮箱/手机:
    温馨提示:
    如需开发票,请勿充值!快捷下载时,用户名和密码都是您填写的邮箱或者手机号,方便查询和重复下载(系统自动生成)。
    如需开发票,请勿充值!如填写123,账号就是123,密码也是123。
    支付方式: 支付宝扫码支付    微信扫码支付   
    验证码:   换一换

    加入VIP,交流精品资源
     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    FORD NSP MK-FASTENERS-1995 NSP METRIC MK-FASTENERS (INACTIVE FOR NEW DESIGN 1 1 1995).pdf

    1、Standard Parts METRIC INTERNAL RETAINING RINGS TYPE HB (3Btvl1) I CATEGORY 720.010 A J LUG DESIGN SIZES 52 THRU 250 RETAINER DIMENSIONS GROOVE DIMENSIONS 8 9 N660215 0.1 1.1 0.35 1.00 1.15 13.10 13.80 0.90 1.35 2.9 14 N660214 0.1 1.0 0.33 0.10 0.85 12.65 12.75 0.75 1.2 0.84 0.96 14.12 14.50 1.35 2.5

    2、 13 N660213 0.1 0.9 0.30 0.70 0.85 11.60 11.70 0.10 1.30 2.5 1.0 0.54 0.66 11.17 13.55 12 N660212 0.1 0.8 0.25 0.70 0.85 10.50 10.60 0.70 1.0 0.54 0.66 12.07 12.45 1.30 2.1 11 1.0 0.54 0.66 10.85 11.35 10 N660210 0.1 0.6 0.20 0.50 0.60 8.40 8.46 0.45 N660211 0.1 0.7 0.23 0.10 0.85 9.45 9.51 0.65 0.8

    3、5 1.7 1.25 2.1 0.8 0.34 0.46 8.61 9.05 1.0 0.54 0.66 9.81 10.25 15.10 15.32 0.96 0.84 1.2 3.3 1.60 0.90 14.90 14.80 1.15 1.00 0.40 1.2 0.1 N660216 15 16.85 16.47 0.96 0.84 1.5 16 3.3 1.65 17.95 17.57 0.96 0.84 1.5 3.4 1.10 0.95 15.95 15.85 1.15 1.00 0.43 1.3 0.1 N660217 17 19.15 18.77 0.96 0-84 1.5

    4、0.95 17.00 16.90 1.15 N660248 N660241 65.40 63.65 2.08 1.92 2.60 61.90 61.60 2.35 2.15 6.7 5.10 2.50 58.70 58.40 2.35. 2.15 1.70 N660246 164.25 I 62.50 12-06 11.92 I i2: I : I ;:2: I 2.50 I6O.W 160.50 12.35 12.15 1 I ita I I N660245 0.3 5.0 1.65 2.15 2.35 55.30 55.60 2.30 62.10 60.35 2.08 1.92 2.3 4

    5、.10 6.4 55 N660244 0.3 4.6 1.55 1.15 1.95 53.10 53.30 2.30 2.3 1.92 2.08 57.15 58.90 52 4.60 6.0 N660243 0.3 4.3 1.45 1.75 1.95 50.90 51.10 2.30 2.3 1.52 1.68 54.10 56.25 50 4.50 6.0 2.3 1.52 1.68 52.65 54.20 Irr660242 0.3 4.2 1.40 1.75 1.95 49.80 50.00 2.20 4.30 6.0 48 2.3 1.52 1.68 51.50 53.05 N66

    6、0241 0.3 4.0 1.35 1.75 1.95 48.10 48.90 2.10 4.30 6.0 47 N660240 0.3 3.9 1.30 1.75 1.95 47.60 41.80 2.10 2.3 1.52 1.68 50.40 51.95 4.30 6.0 46 N660239 0.3 3.7 1.25 1.75 1.95 44.50 44.10 2.10 1.9 1.52 1.68 49.30 50.85 4.20 5.8 45 N660238 0.3 3.6 1.20 1.15 1.95 42.40 42.60 2.00 1.9 1.52 1.68 45.95 41.

    7、50 42 4.00 5.1 1.9 1.52 1.68 43.60 45.15 N660231 0.3 3.6 1.20 1.40 1.55 40.40 40.80 1.70 3.40 4.6 40 1.9 1.24 1.36 41.65 42.80 N660236 0.3 3.5 1.15 1.40 1.55 39.30 39.50 1.10 3.40 4.6 38 N660235 0.3 3.5 1.15 1.40 1.55 38.30 38.50 1.10 1.9 1.24 1.36 40.55 41.10 3.40 4.6 31 X6618234 0.3 3.3 1.10 1.40

    8、1.55 37.20 31.40 1.60 1.9 1.24 1.36 39.50 40.65 36 3.30 4.6 N660233 0.3 3.2 1.05 1.40 1.55 36.10 36.30 1.60 1.9 1.24 1.36 38.25 39.40 35 3.20 4.6 1.9 1.24 1.36 37.25 38.40 N660232 0.3 2.9 0.95 1.40 1.55 33.90 34.10 1.60 34 3.10 4.6 1.9 1.24 1.36 34.85 36.00 N660231 0.2 2.9 0.95 1.40 1.55 31.90 32.10

    9、 1.50 3.00 4.6 32 1.9 1.24 1.36 32.90 34.05 N660230 0.2 2.7 0.90 1.40 1.55 29.80 29.95 1.50 30 2.90 4.6 1.9 1.24 1.36 30.60 31.75 N660229 0.2 2.7 0.90 1.40 1.55 28.80 28.95 1.40 2.80 4.6 28 1.9 1.24 1.36 29.45 30.60 21 N660227 0.2 2.4 0.80 1.20 1.35 26.60 26.75 1.30 N660228 0.2 2.6 0.85 1.20 1.35 21

    10、.70 27.85 1.40 2.70 4.0 1.5 1.04 1.16 28.60 29.25 26 2.60 4.0 1.5 1.04 1.16 27.50 28.15 N660226 0.2 2.1 0.10 1.20 1.35 25.40 25.55 1.30 25 2.30 4.0 1.5 1.04 1.16 26.30 26.95 N660225 0.2 2.0 0.67 1.20 1.35 24.35 24.50 1.20 2.20 4.0 24 1.5 1.04 1.16 25.20 25.85 N660224 0.2 1.9 0.65 1.20 1.35 23.30 23.

    11、45 1.20 23 2.10 4.0 N660223 0.2 1.8 0.60 1.00 1.15 22.20 22.35 1.20 1.5 1.04 1.16 24.15 24.80 22 N660222 0.2 1.7 0.57 1.00 1.15 21.15 21.30 1.10 2.10 4.0 2.00 4.0 1.5 0.84 0.96 23.05 23.10 21 N660221 0.2 1.7 0.55 1.00 1.15 20.10 20.25 1.00 1.5 0.84 0.96 22.12 22.50 1.80 3.6 20 N660220 0.2 1.6 0.53 1

    12、.00 1.15 19.05 19.15 1.00 1.80 3.6 1.5 0.84 0.96 20.97 21.35 19 N660219 0.1 1.5 0.50 1.00 1.15 18.00 18.10 0.95 1.70 3.4 1.5 0.84 0.96 19.92 20.30 18 N660218 0.1 1.4 0.45 1.00 62 60 N660251 0.4 5.9 1.95 2.15 2.35 66.90 67.20 2.70 N660252 0.4 6.0 2.00 2.55 2.35 69.00 69.30 2.80 5.60 7.4 2.7 2.32 2.48

    13、 11.45 73.20 65 5.40 7.1 2.7 1.92 2.08 69.15 70.90 N660250 0.4 5.7 1.90 2.15 2.35 65.80 66.10 2.60 63 5.30 1.1 N660249 0.4 5.1 1190 2.15 2.35 63.80 64.10 2.60 2.7 1.92 2.08 67.85 69.60 5.30 6.9 2.3 1.92 2.08 66.05 61.80 For General Specifications see Page MK-950.01 MATERIAL SAE 1060 - 1090 or JIS G

    14、4401 (Grades SK5. SK6 and SKI) steel. For general use, S finish should be specified. Retaining tis with the S finish shall have a corrosion inhibiting coating to provide a protective barrier adequate for normal storage. For other finshes see Finish Section. Example description for a 8 mm dm Type HB

    15、Internal Retaining Ring shown on this page is: *The suffix S, with or without a Finish numeral, makes these part numbers complete. ,N,6,6,0,2,1 ,0, ,S, ,R,I ,N,G, ,8,mlm, lR,E,TIAll ,NII ,NIG, ,T,YIPIE, ,H,BI ,I ,NIT, I I I , I OCT 1960 Product Engineering PAGE MK-603.01 c-2 Standard Parts INTERNAL

    16、RETAINING RINGS CATEGORY 720.010 A ITYPE HB (3BM1) METRIC 9 J LUG DESIGN SIZES 52 THRU 250 RETAINER DIM1 D T IP I I I mm MAX MIN MAX MIN MIN I I Ill 76.70 74.95 2.48 2.32 2.7 78.50 76.75 2.48 2.32 2.7 80.60 78.85 2.48 2.32 2.7 SION! LUG B EIGHT NOM - - 7.6 7.6 7.6 7.9 7.9 7.9 8.7 8.7 8.7 8.7 8.7 8.7

    17、 9.4 9.4 9.4 10.3 9.4 10.3 10.3 10.3 10.3 11.6 11.6 11.6 11.6 11.6 12.3 12.3 13.5 13.5 14.2 14.2 14.2 15.2 16.8 3 16.8 18.7 18.7 - - 9.4 - - 12.3 - LARGE E ;ECTION NOM 5.8 5.8 5.8 6.2 6.5 6.7 6.9 7.0 7.3 7.4 7.6 7.8 8.1 8.2 8.4 8.4 8.5 8.7 8.9 9.4 9.5 9.8 10.4 10.4 10.6 10.8 10.8 10.9 11.1 11.4 11.6

    18、 12.0 12.4 12.9 13.3 14.2 15.0 15.5 16.3 16.7 - J SMALL iECTIOl NOM - 2.9 2.9 2.9 3.1 3.3 3.4 3.6 3.6 3.6 3.8 3.9 4.1 4.1 4.3 4.6 4.6 4.6 4.7 4.9 5.0 5.0 5.3 5.4 5.4 5.4 5.6 5.6 5.7 5.9 6.0 6.3 6.5 6.9 7.3 7.5 7.7 7.8 3.2 4.2 4.6 - - - - T m GROOVE D 87.50 87.20 3.15 90.70 90.40 3.15 93.90 93.60 3.1

    19、5 96.00 95.70 3.15 101.30 101.00 3.15 98.10 97.80 3.15 104.50 104.20 3.15 106.70 106.30 3.15 108.80 108.40 3.15 111.90 111.50 3.15 .15.00 114.60 3.15 .17.10 116.70 3.15 22.30 121.90 3.15 .2?.40 127.00 3.15 !32.50 132.10 3.15 L37.60 137.20 3.15 142.70 142.30 3.65 147.80 147.40 3.65 152.90 152.50 3.65

    20、 L58.00 157.60 3.65 163.10 162.70 3.65 173.40 172.90 4.50 178.50 178.00 4.50 183.70 183.60 4.50 188.90 188.40 4.50 194.10 193.60 5.35 199.30 198.80 5.35 209.50 209.00 5.35 219.90 219.40 5.35 230.50 230.00 5.35 68.20 167.80 4.50 - MIN 2.55 2.55 2.55 2.55 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2

    21、.95 2.95 2.95 2.95 2.95 2.95 2.95 3.40 3.40 3.40 3.40 3.40 4.25 4.25 4.25 4.25 5.10 4.25 5.10 5.10 5.10 5.10 5.10 5.10 5.10 - - 2.95 - - - - IMENSIONS I REF 1 MIN 2.10 6.3 2.20 6.6 2.25 6.7 2.35 7.1 2.40 7.2 2.50 7. 5 2.60 7.8 2.70 8.1 2.80 8.4 2.85 8.6 2.90 8.7 3.00 9.0 3.10 9.3 3.15 9.5 3.20 9.6 3

    22、.25 9.8 3.30 9.9 3.35 10.1 3.45 10.4 3.50 10.5 3.55 10.7 3.60 10.8 3.65 11.0 3.75 11.3 3.10 11.1 3.80 11.4 3.85 11.6 3.90 11.7 3.95 11.9 4.00 12.0 4.10 12.3 4.20 12.6 15.0 17.1 0.4 N660256 0.4 N660257 0.4 !. 1 N660258 N660259 N660260 N660261 0; 4 N660262 0.4 N660263 0.4 N660264 0.4 0.4 N660266 N6602

    23、65 0.4 N660267 0.4 N660268 0.4 N660209 0.4 N660270 0.4 0.4 N660271 N660272 0.4 N660273 0.4 N660274 0.4 N660275 0.4 N660276 0.4 N660277 0.4 N660278 0.4 N660279 0.4 N660281 0.4 N660280 0.4 N660282 0.4 N660283 0.4 0.4 N660284 0.4 N660285 0.4 N660286 N660287 !i 1 N660288 N660289 0.4 N660291 N660290 0.4

    24、N660292 0.4 0.4 N660293 I N660294 I MATERIAL SAE 1060 - 1090 or JIS G 4401 (Grades sK5, SK6 and SK7) Steel. For General Specifications see Page MK-950.01 normal storage. For other finishes see Finish Section. For general use, S finish should be specified. Retaining rings with the S finish shall have

    25、 a corroslon Inhibiting coating to provide a protectme barrier adequate for Example description for a 68 mm dia. Type HB Internal Retaining Ihng shown on this page is: *The suffix S, with or without a Finish numeral, makes these part numbers complete. ,N,6,6,0,2,5,5, ,S, ,R,I ,N,G, ,6,8,m,ml ,R,E,T,

    26、A,I ,N,I ,N,G, ,T,Y,P,E, ,H,B, lI ,NIT, , I , I PAGE MK-603.02 Standard Parts METRIC LUG DESIGN SIZES 4,5 AND 6 I S mm T 7 8 11 12 16 22 120145 I 20.05 21 19 55 19.15 30 28.15 27.50 32 29.85 29.20 34 31.65 31.00 36 35 32.55 31.90 33.9) 32.85 38 35.45 34.80 40 31.10 36.25 42 39.15 38.30 43 40.00 39.1

    27、5 45 41.95 41.10 46 42.90 42.05 48 44.75 43.90 50 46.55 45.70 52 48.15 41.75 54 50.25 49.25 55 57 50.95 49.95 58 53.25 52.25 60 53.95 52.95 56.15 55.15 62 57.65 56.65 65 60.90 59.65 70 68 63.60 62.35 65.10 63.85 72 67.10 65.85 75 78 72.50 71.25 69.50 68.25 80 14.70 73.45 82 76.90 75.65 85 88 79.10 7

    28、7.85 90 81-90 80.65 83.70 82.45 95 88.60 87.35 100 92.10 91.75. RETAINER DIMENSIONS I GROOVE DIMENSIONS 1 1 T P B J E G - MATERIAL HOLE LUG LARGE SMALL IHICKNESS DIAMETER HEIGHT SECTION SECTION DIAMETER For General SDecificationS see Paee MK-950.01 - Mm 3.72 4.67 5.62 6.40 7.40 8.35 9.30 11.23 12.18

    29、 13.13 14.03 14.95 15.95 16.85 18.70 17.80 19.65 20.55 21.50 22.45 23.35 23.35 25.25 26.20 28 15 30.00 31.80 32. IO 33.65 35.50 37.40 39.30 40.20 41.10 43.00 44.90 46.90 48.80 50.70 51.50 54.30 53.40 56.30 58.20 61.20 64.10 66. Oil 67.90 70. 80 73.60 75. it 77.40 83.10 85.00 94.60 - - - - - - - - -

    30、- - - 8o.z.a 89. aa - T MAX MIN REF MJh MAX 1.35 1.20 0.75 2.3 0.2 N661222 1.55 1.40 0.78 2.3 0.2 1.55 1.40 0.80 2.4 0.2 N661223 N661224 1.55 1.40 0.83 2.5 0.2 N661225 1.55 1.40 0.90 2.7 0.3 N661226 1.55 1.40 1.00 3.0 0.3 N661227 1.55 1.40 1.05 3.1 0.3 N661228 1.55 1.40 1.08 3.2 0.3 N661229 N661233

    31、N661234 X861237 N661238 2.35 2.15 1.50 4.5 0.4 N661239 2.35 2.15 1.60 4.8 0.4 N661240 2.35 2.15 1.60 4.8 0.4 N661241 2.35 2.15 1.65 4.9 0.4 N661242 2.35 2.15 1.65 4.9 0.4 N661243 2.35 2.15 1.70 5.1 0.4 N661244 2.35 2.15 1.70 5.1 0.4 2.35 2.15 1.75 5.3 0.4 N661246 N661245 2.75 2.55 1.80 5.4 0.4 N6612

    32、47 2.75 2.55 1.85 5.5 0.4 N661248 2.75 2.55 1.90 5.7 0.4 N661249 2.15 2.55 2.00 6.0 0.4 N661250 2.15 2.55 2.05 6.1 0.4 U661251 2.75 2.55 2.10 6.3 0.4 N661252 2.75 2.55 2.20 6.6 0.4 X661253 3.15 2.95 2.25 6.7 0.4 N661254 3.15 2.95 2.30 6.9 0.4 N661255 3.15 2.95 2.40 7.2 0.4 N661256 3.15 2.95 2.50 7.9

    33、 0.4 N661257 , 1 MATERIAL: Sizes 4 through 6 ESF-M2A66-A copper. Others SAE 1060 - 1090 or JIS G 4401 (Grades SK5, ad 7) steel. I For general use, S finsh should be specified. Retang rings with the S finish shall have a corrosion inhibiting coating to provide a protective barrier adequate for normal

    34、 storage. For other finishes see Finish Section. *The suffix S, with or without a Finish numeral, makes these part numbers complete. Example description for a 4 mm dia. Type SB External Retaining Ring shown on this page is : i ,N,6,6,t ,2,0,0, ,SI ;R,I ,NIGl ,41m,m, ,R,EITIA,I ,N1I ,N,G, ,T,Y,P,E, ,

    35、SIB, ,E,XITl , ,. , OCT 1980 Product Engineering PAGE MK-613.01 Standard Parts METRIC EXTERNAL RETAINING RINGS TYPE RB (3CM1) CATEGORY 720.040 S NOMINAL SHAFT IIAMETER mm 1 2 3 4 5 6 7 8 9 10 11 12 13 15 16 18 20 22 25 + I r-* D INSIDE DIAMETER MAX MIN 0.67 0.56 1.33 1.22 2.13 2.02 2.93 2.82 3.73 3.

    36、62 4.73 4.62 5.28 5.17 6.20 6.05 6.85 6.70 7.65 7.50 8.60 8.45 9.25 9.10 10.00 9.85 11.50 11.25 12.25 12.00 14.00 13.75 15.70 15.45 17.10 16.05 19.60 19.35 ISIONS T I GROOVE DIMENS( 1 RING DIM1 Y OUTSIDE MAMETER NOM 2.0 4.0 5.6 7.2 8.5 11.1 13.4 14.6 15.8 16.8 17.4 20.3 18.6 22.8 23.8 27.2 30.0 33.0

    37、 37.1 THlCl MAX 0.30 0.30 0.46 0.66 0.66 0.66 0.66 0.66 0.96 0.96 0.96 1.16 1.16 1.16 1.16 1.36 1.36 1.36 1.36 - - - - - - ESS MIN 0.20 0.20 0.34 0.54 0.54 0.54 0.54 0.54 0.84 0.84 0.84 1.04 1.04 1.04 1.04 1.24 1.24 1.24 1.24 - - - - - - E G BRIDGE 0.67 0.72 0.30 MIN MAX NOM DIAMETER 0.55 1.45 1.40

    38、0.65 2.30 3.82 3.90 0.90 3.02 3.10 0.85 2.22 1.15 4.77 4.85 1.40 7.90 8.00 1.50 7.10 7.20 1.50 6.30 6.40 1.40 5.45 5.55 1.60 8.90 8.80 1.80 9.60 9.45 2.00 12.35 12.50 2.30 11.65 11.00 2.10 10.15 10.30 2.50 14.30 14.15 2.80 16.00 15.80 3.00 17.40 17.20 3.30 20.00 19.80 W DEPTH WIDTH d GROOVE MAX REF

    39、MIN 0.35 0.32 0.55 0.70 0.85 0.45 0.70 0.85 0.35 0.50 0.60 0.28 0.32 0.35 0.14 0.85 0.70 0.58 0.85 0.70 0.73 0.85 0.70 0.80 1.15 1.00 1.00 1.15 0.90 1.00 1.15 1.00 1.05 1.35 1.20 1.20 1.35 1.20 1.35 1.35 1.20 1.60 1.35 1.20 1.75 1.55 1.40 1.85 1.55 1.40 2.00 1.55 1.40 2.30 1.55 1.40 2.50 Is 2 EDGE M

    40、ARGIN MIN 0.3 0.6 0.7 0.9 1.1 1.2 1.5 1.6 1.8 2.0 2.1 2.4 2.7 3.2 3.5 3.7 4.0 4.6 5.0 R JOTTOM RADII MAX 0.05 0.05 0.15 0.15 0.15 0.15 0.15 0.25 0.25 0.25 0.25 0.25 0.25 0.40 0.40 0.40 0.40 0.40 0.40 FORD PART NUMBERS N663100 N66310 1 N663102 N663 1 03 N663 1 04 N663105 N663 106 N663107 N663 108 N66

    41、3 109 N663 1 10 N663111 N663112 N663113 N663114 N663 1 15 N663116 N663117 N663118 For General Specifications see Page MK-950.01 MATERIAL. Slze 1. ESF42A66-A copper. Others SAE 1060-1090 or JIS G 4401 (Grades SK5. SK6 and SK7) steel. For general use, S finish should be specified. Retaining rings with

    42、 the S finish shall have a corrosion idhibiting coating to provide barrier adequate for normal storage. For other finishes see Finish Section. *The suffix S. with or without a Finish numeral, makes these part numbers complete. Example description for a 1 mm dia. External Retaining Ring shown on this

    43、 page is: N663100 S RING lmm RETAINING TYPE RB EXT I1 PAGE MK-616.02 Product Engineering APR 1985 Standard Parts METRIC GENERAL SPECIFICATIONS FOR RETAINING RINGS SCOPE This specification is intended to cover general and dimensional data for three series of general purpose tapered and reduced cross

    44、section retaining rings, (Pages MK-603.-1, MK-603.02, MK-613.01 and MK-613.02) which may be used with the nominal size shafts and bores listed and in grooves of the recommended dimensions listed on the above pages. GENERAL Three types of retaining rings are covered by this specification. They are: T

    45、ype SB (3AM1) external retaining rings for shafts Type HB (3BM1) internal retaining rings for bores or housings. Type RB (3CM1) external “E“ type retaining rings for radial installation on shafts. MATERIAL The material used for the subject rings shall be either SAE 1060-1090, JIS G 4401 (Grades SK5,

    46、 SK6 and SK7) carbon steel or ESF-M2A66-A beryllium copper as specified on the appropriate parts pages. I HEAT TREATMENT The carbon steel should be heat treated by austempering to the hardness values shown in Table 1. Table 1 Hardness Ranges for Tapered and Reduced Cross Section Retaining Rings Type

    47、 SB (3-1) Type HB (3BM1) External Rockwell C Hardness Ring Size-mm Rockwell C Hardness Ring Size-mm Internal 7 - 12 48 - 52 27 - 250 47 - 51 88 - 100 49 - 53 21 - 26 48 - 52 27 - 85 50 - 54 14 - 20 49 - 53 13 - 26 51 - 55 8 - 13 51 - 55 Type RB (3CM1) External Ring Size-mrn Rockwell C Hardness 2-8 4

    48、8 - 52 9 - 25 49 - 53 The beryllium copper rings should be heat treated to a Rockwell C hardness of 37 - 43. FINISHES When steel parts have electroplated finishes, they shall be baked to oviate hydrogen embrittlement; see Finish Section AA, Finish Specifications - General Requirements. (Continued) O

    49、CT 1980 Product Engineering PAGE MK-950.01 Standard Parts METRIC GENERAL SPECIFICATIONS ALL RETAINING RINGS (Continued) PERMANENT SET - EXTERNAL TYPE SB (3AM1) RINGS wand the ring with a plier until it just fits over a shaft 1% larger than the nominal shaft diameter. Repeat this procedure 4 times with the same ring. The Ping shall not crack. Measure the ring diameter “D“ in the three places shown in Figure 1. FIGURE 1-PERMANENT SET MEASUREMENTS FOR TYPE SB (3AM1) RINGS Compute the average of the three diameters and compare it to the minimum groove diameter listed on the parts pag


    注意事项

    本文(FORD NSP MK-FASTENERS-1995 NSP METRIC MK-FASTENERS (INACTIVE FOR NEW DESIGN 1 1 1995).pdf)为本站会员(cleanass300)主动上传,麦多课文档分享仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知麦多课文档分享(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1 

    收起
    展开