FORD ESH-M4D370-B-2009 POLYTETRAFLUOROETHYLENE 25% GLASS FILLED TO BE USED WITH FORD WSS-M99P1111-A 《25%玻璃填充的聚四氟乙烯 与标准FORD WSS-M99P1111-A一起使用 》.pdf
-
资源ID：746376
资源大小：20.51KB
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD ESH-M4D370-B-2009 POLYTETRAFLUOROETHYLENE 25% GLASS FILLED TO BE USED WITH FORD WSS-M99P1111-A 《25%玻璃填充的聚四氟乙烯 与标准FORD WSS-M99P1111-A一起使用 》.pdf
1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 11 19 N-STATUS NO REPLACEMENT NAMED J. CRIST, NA 2005 05 27 Revised Inserted 3.0; Deleted 3.2, 3.3 & 4 1979 05 25 Released R# 5-8/CH8H-RD834190 Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 1 POLY
2、TETRAFLUOROETHYLENE, 25% GLASS FILLED ESH-M4D370-B NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a 25% fiberglass filled polytetrafluoroethylene (TFE) compounded to minimize wear. 2. APPLICATION This specification was released originally for material used for t
3、he air conditioning compressor piston rings. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 MATERIAL 3.1.1 Density 2.17 - 2.30 g/cm3(ASTM D 792) 3.1.2 Filler Content, by weight 23 - 27% (FLTM BO 006-01, except conduct test at 650 +/- 10 C, omit step 3 in procedure)
