FORD ESE-M99P25-A-2008 WATER QUALITY INITIAL FILL ENGINE COOLANT To be used with FORD WSS-M99P1111-A 《用作发动机冷却液的初始注入的水的质量 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M99P25-B］》.pdf
-
资源ID：746073
资源大小：15.91KB
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD ESE-M99P25-A-2008 WATER QUALITY INITIAL FILL ENGINE COOLANT To be used with FORD WSS-M99P1111-A 《用作发动机冷却液的初始注入的水的质量 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M99P25-B］》.pdf
1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Ver 2 2008 05 14 N-STATUS Replaced by WSS-M99P25-B; Inserted 3.0; Deleted 4 A. Reaume 1988 12 14 Released NE01-E-10000474-033 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 1 WATER QUALITY, INITIAL FILL
2、, ENGINE COOLANT ESE-M99P25-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The water defined by this specification is intended to provide a guideline for water purity used with engine coolants. 2. APPLICATION This specification was released originally for water which, when mixed with engine coolant, will
3、not cause precipitation of corrosion inhibitors used in engine coolant to occur. This specification is for both initial fill and service use. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements Fo
4、r Production Materials (WSS-M99P1111-A). All values are maximum ppm (mg/L) allowed except as indicated. Chloride 50 Sulfate 50 Total alkalinity 100 Total hardness (as Ca CO 3) 125 Total dissolved solids 200 Iron 1.0 Sulfide None pH (Electrometric Units) 5.0 - 9.0 Specific Conductivity 0 - 300 (micro ohms at 25 C) Particulate solids must be smaller than 100 microns Note: A 10% maximum variation is allowed due to local water variation.
