FORD ESA-M1C152-A-2008 GREASE - SYNTHETIC LUBRICANT TO BE USED WITH FORD WSS-M99P1111-A 《合成润滑脂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M13P13-A FORD WSS-M13P13-A］》.pdf
-
资源ID：744849
资源大小：16.65KB
- 资源格式： PDF
下载积分：10000积分
快捷下载
账号登录下载
微信登录下载
下载资源需要10000积分（如需开发票，请勿充值！）
|
友情提示
2、PDF文件下载后，可能会被浏览器默认打开，此种情况可以点击浏览器菜单，保存网页到桌面，就可以正常下载了。
3、本站不支持迅雷下载，请使用电脑自带的IE浏览器，或者360浏览器、谷歌浏览器下载即可。
4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩，下载后原文更清晰。
5、试题试卷类文档，如果标题没有明确说明有答案则都视为没有答案，请知晓。
|
FORD ESA-M1C152-A-2008 GREASE - SYNTHETIC LUBRICANT TO BE USED WITH FORD WSS-M99P1111-A 《合成润滑脂 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M13P13-A FORD WSS-M13P13-A］》.pdf
1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 10 10 N-STATUS Replaced by WSS-M13P13-A L. Schmalz, FNA 2004 02 27 Revised Para 3.0 inserted; para 3.5, 3.6, 4 deleted 1969 06 30 Released COY2-958494 Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of
2、 1 GREASE - SYNTHETIC LUBRICANT ESA-M1C152-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a synthetic grease. 2. APPLICATION This specification was released originally for material used as a lubricant for steering linkages and similar parts as specified. 3. RE
3、QUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Materials suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A) 3.1 COMPOSITION Unsaturated Primary Aliphatic Amine Salts of 12 - 18 Dibasic Acids Plexol 201, max 0.5% Unsaturated Primary Aliphatic Imides of Balance Dibasic Acids 3.2 WORKED PENETRATION, (mm/10) 250 - 350 (ASTM D 217, worked 60 strokes) 3.3 DROPPING POINT, min 58 oC (ASTM D 566) 3.4 OIL SEPARATION None (96 hours)
