1、 ETSI TS 186 017-1 V5.1.1 (2012-09) IMS Network Testing (INT); Anonymous Communication Rejection (ACR) and Communication Barring (CB) using IP Multimedia (IM) Core Network (CN) subsystem Conformance Testing Specification; Part 1: Protocol Implementation ConformanceStatement (PICS) Technical Specific
2、ation ETSI ETSI TS 186 017-1 V5.1.1 (2012-09)2Reference RTS/INT-00069-1 Keywords CB, IMS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la
3、Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents betwee
4、n such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be s
5、ubject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/
6、ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2012. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the
7、 ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186
8、017-1 V5.1.1 (2012-09)3Contents Intellectual Property Rights 4g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 6g33.3 Abbreviations . 6g34 PICS proforma
9、for TS 124 611 6g34.1 Guidance for completing the PICS proforma . 6g34.1.1 Purposes and structure 6g34.1.2 Abbreviations and conventions . 7g34.1.3 Instructions for completing the PICS proforma 8g34.2 Identification of the implementation 9g34.2.1 Date of the statement 9g34.2.2 Implementation Under T
10、est (IUT) identification 9g34.2.3 System Under Test (SUT) identification 9g34.2.4 Product supplier 9g34.2.5 Client (if different from product supplier) 10g34.2.6 PICS contact person 10g34.3 Identification of the TS 124 611 . 11g34.4 Global statement of conformance . 11g34.5 Roles . 11g34.6 User role
11、 . 12g34.6.1 Major capabilities . 12g34.7 Network role . 12g34.7.1 Major capabilities . 13g34.7.2 Supplementary service capabilities . 14g3Annex A (informative): Bibliography . 15g3History 16g3ETSI ETSI TS 186 017-1 V5.1.1 (2012-09)4Intellectual Property Rights IPRs essential or potentially essentia
12、l to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified
13、to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the
14、existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee IMS Network Testing (INT). The present do
15、cument is part 1 of a multi-part deliverable covering the Conformance Test Specification of Anonymous Communication Rejection (ACR) and Communication Barring (CB) using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“
16、; Part 2: “Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Anonymous Communication Rejection (ACR) and Communication Barring (CB) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.611 Release 10)“. 2 ETSI ETS
17、300 406 (1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4
18、 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 5 Void. 2.2 Informative references The following referenced documents are not necessary for the application of the present documen
19、t but they assist the user with regard to a particular subject area. i.1 ETSI TS 124 607: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) usi
20、ng IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.607 Release 10)“. i.2 ETSI TS 124 604: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Communication Diversion (CDIV) using IP Multimedia (IM) Core Ne
21、twork (CN) subsystem; Protocol specification (3GPP TS 24.604 Release 10)“. i.3 ETSI TS 124 605: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specificati
22、on (3GPP TS 24.605 Release 10)“. ETSI ETSI TS 186 017-1 V5.1.1 (2012-09)63 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-7 4 and in particular, the following defined in ISO/IEC 9646 1 3 apply: Implemen
23、tation Conformance Statement (ICS): A statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented. The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS,
24、etc.g3ICS proforma: A document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS. Protocol ICS (PICS): An ICS for an implementation or system claimed to conform to a given protocol specification. 3.2 Symbols For the purposes of the present document,
25、 the symbols given in 1 apply. 3.3 Abbreviations For the purposes of the present document, the abbreviations given in 1 and the following apply: ICS Implementation Conformance Statement IUT Implementation Under Test PDU Protocol Data Unit PICS Protocol ICS SCC Service Code Command SCS System Conform
26、ance Statement SUT System Under Test 4 PICS proforma for TS 124 611 Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its i
27、ntended purposes and may further publish the completed PICS. 4.1 Guidance for completing the PICS proforma 4.1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in TS 124 611 1 may provide informat
28、ion about the implementation in a standardized manner. The ICS proforma is subdivided into clauses for the following categories of information: guidance for completing the PICS proforma; identification of the implementation; identification of the ETSI TS 124 611 global statement of conformance; role
29、s; ETSI ETSI TS 186 017-1 V5.1.1 (2012-09)7 user role; - major capabilities; network role; - major capabilities - supplementary service capabilities 4.1.2 Abbreviations and conventions The PICS proforma contained in this clause is comprised of information in tabular form in accordance with the guide
30、lines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the impleme
31、ntation?“. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capabil
32、ity. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related optional items and the logic of their selection which
33、 is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an unique conditional status expression which is defined immediately following the tab
34、le. Reference column The reference column makes reference to TS 124 611 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support colum
35、n: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). If this PICS proforma is completed in order to describe a multiple-profile support in a s
36、ystem, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter the unique reference to a conditional expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space for comments provi
37、ded at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and only if that profile is to be used. ETSI ETSI TS 186 017-1 V5.1.1 (2012-09)8EXAMPLE 1: ?3: IF prof1 THEN Y ELSE N NOTE: As stated in ISO/IEC 9646-7 4,
38、 support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Values allowed column The valu
39、es allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: - range of values: example: 5 20 - list of values: , , ., example: 2 ,4 ,6 ,8, 9 example: 1101B, 1011B, 1111B example: 0AH, 34H, 2FH - list of named values: (), (), ., () exam
40、ple: reject(1), accept(2) - length: size ( ) example: size (1 8) Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. References to items Fo
41、r each possible item answer (answer in the support column) within the ICS proforma a unique reference exists, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. If there is more than
42、 one support column in a table, the columns are discriminated by letters (a, b, etc.), respectively. EXAMPLE 2: 4.5/4 is the reference to the answer of item 4 in table 4.5. Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicat
43、es that the whole clause or the whole table is not required to be completed if the predicate is FALSE. 4.1.3 Instructions for completing the PICS proforma The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an explicit answer shall be en
44、tered, in each of the support or supported column boxes provided, using the notation described in clause 4.1.2. If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately. More detailed instructions are given at the beginning of the different clause
45、s of the PICS proforma. ETSI ETSI TS 186 017-1 V5.1.1 (2012-09)94.2 Identification of the implementation Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding ver
46、sion numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regarding information supplied in the PICS should be named as the contact person. 4.2.1 Date of the statement . 4.2.2 Implem
47、entation Under Test (IUT) identification IUT name: . . IUT version: . 4.2.3 System Under Test (SUT) identification SUT name: . . Hardware configuration: . . . Operating system: . 4.2.4 Product supplier Name: . Address: . . . Telephone number: . ETSI ETSI TS 186 017-1 V5.1.1 (2012-09)10Facsimile numb
48、er: . E-mail address: . Additional information: . . . 4.2.5 Client (if different from product supplier) Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . 4.2.6 PICS contact person (A person to contact if there are any queries concerning the
49、content of the ICS) Name: . Telephone number: . Facsimile number: . E-mail address: . ETSI ETSI TS 186 017-1 V5.1.1 (2012-09)11Additional information: . . . 4.3 Identification of the TS 124 611 This PICS proforma applies to the following standard: ETSI TS 124 611 (2012-01): “Anonymous Communication Rejection (ACR) and Communication Barring (CB) using IP Multimedia (IM) Core Network (CN) subsystem“ (Release 10). 4.4 Global statement of conformance Are all mandatory capabilities implemented? (Yes/No) . NOTE: Answe
